Thank you soo much This looks easier and more understandable than " Don Smith devices" and also you hit the nail on the head right on ...higher frquency and high voltage is the secret to over unity amplification!!! great work
Dear Alex. Yesterday you received my answer through my wifes chanel. Don Smith says the truth, but not everythig to build such a device. In video nr 3 i show what is missing. First you need to resonate the coils and then to hit the positive or the negative phase of the output current the way i describe. If you do it right you will see that you do not need other coils to connect!
I dont know if you got my other question on your other video but can you keep adding say 2 or 3 recievers to 1 transmitter to obtain "OU" times 3 without drawing in more current to the transmitter?? I believe you should be able to, right?? after all the transmitter like in radio doesnt care if you have 1 listener or 30, 000 radios tuned to your station
+Alex Manzanero Yes you can use more receiver coils to this project. All coils of course must be resonated with the frequency of the kacher. It is also possible to tune them, on its harmonics. You can tune them to half or quarter of the wave length as well (as i did). Don Smith shows the same in some old pictures. Just don't forget: He did not show the whole consept! He never did and he sayed it in his old videos. If you want to do it you can see that the power can be splited wirelessly! If you wish real overunity check my video nr 3. Good luck.
+G Sav PS: about the radio stations. In this project i deal with longitudinal waves that transfer electric power(as Tesla used), NOT Herzian waves which the radio transmitters are made of.
thanks for your quick response. I know that you are dealing with scalar or longitudinal waves but my question is if you put 2 resonant recievers to your original transmitter will you get double the output ?? Also do you think your transmitter will need more energy than 24 watts or will it stay the same?? Have you tried to do this? thanks very interesting
Awesome video G. Sav. I'm new to electrical and electronics so permit my questions. My question are: how do you find the resonant frequency of the transmitter since one end is connected to ground and the other end is open? Also what does the wavelength mean and how did you know the receiver coil is 1/4 of the wavelength of the transmitter? Lastly, when you connect a load to the receivers, do you need to retune them again? I mean, does adding a load cause the receiver to be out of tune and then you now tune it back? Thanks in advance and keep up the great work.
1) It is a Catcher type Tesla coil, a self resonant generator device. 2) The receiver coil is wounded with the 1/4 of the wire length. That means if the transmitter's secondary coil is 80m of wire, the receiver has 20m of wire to tune it easily. 3) You don't need to retune it. IF you achieve resonance, it works of its self.
@@gsav2504 thanks for your response. I understand 2 and 3 but not sure about 1. You said it's a self resonant device, does that mean I can use any frequency on the transmitter and simply tune the receiver to its frequency?
+4dannydg Dear friend, you mean the receiver coil. It is λ/4 of the wave length with tabs. Check the circuit diagrams of my 3 videos. It is all written there!
+G Sav Hey, thanks for the response. No, I meant the number of turns of the feedback L4 coil you have on the Kacher side which has 2.2nf cap in series .
+4dannydg OK, according my version: Kacher=150 turns on a 8cm cylinder. wire=0.3mm. The λ/4 of the receiver coil is 37 turns of 1,2mm wire. Cylinder also 8cm. And the 2,2nf is there to correct the wave length. It is never perfect as you can see!
Maybe cold electricity is the Dielectric electricity Tesla talked about. Is this cold electricity a result of disturbing the environment around the secondary coil?
+smacl61 Yes it could be cold electricity as Tesla claimed. Due to high voltage, hi frequency it is right to say that the environment surround the secondary coil is been disturbing. The goal to this experiment is the output. It shows clearly that the output current is higher the input. It is all about Tesla's style and i recommend you to repeat it at home just to see and understand of yourself what means Hi Energy. You can read the oscilloscope in the video. The scales have the same value to prove it to you. Check it again! It is not difficult to build it. it is difficult to tune it, but you can do it if you follow my instructions.
Hello thanks for sharing, in your video 1 , you have written ‘wavelength /4’ of your desired frequency, so can I assume you are talking about how to determine the wire length? And how does that relate to the oscillator frequency I assume, theses two inductors the L1 and L2 would need to be a sub harmonic length, so if L1 is 4 turns , I assume L2 is some multiple of that no ? Like for example 4x4 = 16 first sub 16 x4 = 64 next sub 64 x4 = 256 Am I correct in assuming you have 256 turns on L2 ? Or is this not correct? Regards
@@gsav2504you say one quarter of the transmitter (length), but what about the size of the wire what guage should i use. And what measurement do I need to make that your variable capacitor because in my place here i have not seen such capacitor
C magnetic charge held by coil has to b resonant with hv hcapacity capacitor but need to discharge and be able achieve discharge into a step dn transformer or battery from wr u cd achieve but look up Don Smith his thing seems much easy yo make as u r supposed to increase the RF resonance with background EMR of that area for charging the high capacity capacitors at high rate of discharge cycles using the coil 3 coils r nessary.... I am sure u will find a way 2 do it provided ur careful with the high voltage caps