Restoration A Severely Damaged Broken Loader Bucket // Classy Reinforcement Welding Skills 

Forget the job, I’m impressed by the little truck that brought it in.

Made for youtube video, there is nothing on this bucket worth saving, even the mounting holes are waddled out.

A fantastic welder can make any metal new again 😊

Buy a new bucket. Wasn’t worth fixing.

На учебу в Пакестан. Там тебя научат ремонту.

Looking pretty isn’t the same thing as strong and functional!!!

Close enough for who it's for lol. Better than nothing. The machine it goes on is probably in the same condition. Just trying to get a little more life out of it.

No wonder that bucket is in such sad shape 😊😊😊 it's way to Thin !!!

Бесполезный труд лучше на металлолом сдать. Металл уже уставший 🤦

Buenas intenciones pero una chapuza como un templo

Good as new until it's used.

"Не битый, не крашеный"... почти новый

No grinding of welding surfaces for prep. Structural integrity not so good. No facing of the pin hole for bucket mount. No bush replacement. Shortcuts = Short life

Very shotty job

tofu in it's purest form.

What would a new bucket cost?

The metal he’s welding in on the sides is way too thin. That old bucket ain’t worth the time material to repair

Mientras vos vas calentando con el oxicorte, otro debe ir moldeando la placa de hierro varon. Haces fuerza al pedo.

Never seen a worse repair

Lo que pasa que esa maquina debe ser china mucha pinta y se rompe enseguida material delgado de china ni el viento es bueno

Надо было хотя бы Шеки ешо на варить пластину

Im freien mit Sprühpistole arbeiten ist das nicht verboten?

What kind of work this.. Remove damage sheet ans fix new plates

That bucket looked like it survived a fall from orbit.

A loader with a discontinued broken bucket is no longer a loader, at times this is necessary I have see it here in the states as well, a farmers fix and that is ok.

It will fail on first use.

Oieee amigo boa tarde vai ficar muito bom né abraço

Super jest to odrestaurowany ale zalecam piaskowanie tego metalu szybciej i do gołego metalu stali i malowanie pod kolor pozdrawiam serdecznie. 👍👍👍👍👍👍

Eek where did they find that ..under a D9 cat.. I know you can only do what you can with what you have . Way too many cuts and no reinforcement and way to thin in too many places . Probably only good for very light work now or he will be repairing it again very soon .

You spent more for gas and oxygen than the bucket was worth not to mention time in labor

На специальной технике используется жёлтый или оранжевый цвет.

I can see noting wrong with the bucket that a new one wouldn’t fix but top marks for effort

champion

🤦‍♂️ это не ремонт- это жульничество

This is painful to watch, unless you don't have too much work for it to do.

الكثير من التعليقات السلبيه . اعلم يا أخي ان "الناس صنفان: إما أخ لك في الدين، أو نظير لك في الخلق .تحلى بالشجاعة للتخلص من ضغط الأشخاص السلبيين، لأنهم أكبر مدمر لحياتك . تابع عملك ولا تلتفت لهؤلاء . مالم تستطيع أن تنجزه اليوم سوف تنجزه غدا

No es un trabajo como lo hubiesen realizado los Indues, no pulio bien el material y pinto sobres suciedad.

Quando si salda bisogna pulire i pezzi e poi bisogna saldare con certi criteri

Couldn't you have just fabricated another loader bucket? The cost of time, work and material just to do this seems just a waste.

что называется выкрасить и выбросить

Ya bro it's not worth it. Lot of work. No ear protection. Sand blasting will be cheaper option. After all it's Chinese made, which looks good but only lasts for a week.

Eso no es una restauracion es una chapuza.ñ

Из старого ковша сделали старый ковш ну что круто вышло, хотя стока времени и затрат на оборудование и расходного материала ушло, для более убедительности можно было срезать неровные места и заменить их другим металлом но и так сойдет, русская поговорка из говна и палок а если их нет то ответ очевиден мы его слепили из того что было, немного шлифования болгаркой и краски и как новый.

Из говна и палок, пустая трата сил и времени.😔Только за труд и старание👍

Amazing work

like Triggers brush

Menuda chapuza...😮🤦‍♂🤦‍♂🤦‍♂

Very good

Seems like a waste of time! Heated up thin, weak metal, a little welding, and paint, this bucket will not hold up to any kind of use

Terrible job

What a complete waste of time and energy, won’t last 5 mins

Made with the cheapest chinesium sheet steel money can buy…in Russian the repair would be made with military grade thick armoured steel and a a brand new tank from the factory would be rolling out with paper thin aluminium sheet panels to be going to the Ukrainian front line.

Pakistani are good for this job he is wasting his time this BUCKET

You patched up a rusty shovel abandoned in the landfill. Didn't you have your teeth?

Not really a restoration. More like polishing a 💩

Wasted

даже не ремонт....так "губы" намазали......

Зачем он красил это?))))))

У вас на ковше масса трещин осталась! А вы его уже красите!!!?

Есть смысл в покраске?!