Restoration BMX - Complete Process 

Took so long to find a simple video of someone disassembling a bike I appreciate you

If you give the tubes a tiny bit of air, it makes inserting into the tire much easier and you don't have to worry about pinching it when putting the other bead of the tire onto the rim.

Next time name the items you're using to clean up the bike parts 😅

I have a question , what do you pour over the bike to make it look so naturally rusty ? I have a new bike pelali something to unscrew)))

Stunning restoration loved the care attention you took with all the aringnal parts it was enjoyable watching you have great talent and anyone would love to own that bike love the colours also

I know very little about paint stripper, etc., and wish you’d list what liquids you’re using…I don’t care about brands, just what it is. Thanks much and great job!

Красиво выглядят❤❤

tá igual a minha só muda que a minha não tem freio e a corrente é preta parabéns cara minha bmx é de manobra a tua é de passeio se tu mudar essa coroa e o pedivela e tirar o freio fica bacana

Wow! If I hadn't seen this, there's no way I would have believed it was the same bike.

Great job, reminds me when I was a kid.... We didn't have any money & I would take 3 bikes the (rich kids threw in the garage) to make 1.

I'm amazed that cleaning the wheel straighten it out! 🤣😂🤣

first off = beautiful restoration - i do not think i would want the brake handle so slick, i might have given them a cross groove - seat post resto - genius - i would have been sliding that rod up and down getting a sore wrist and it looks kinda weird.

Awesome work regardless👍👍👍 and an Original Raleigh CHOPPER is one that needs to be done🙏🙏🙏🙏🙏

18:14 had me so riled up, 18:34 made me happy again

Cool gemacht. Ich habe es vor 2 Jahren an einem alten Haro Psycho versucht bei dem im Stahlrahmen die nachträglich verwendete Alu-Sattelstange festgegangen war. Das Alu der Sattelstange ist Kontakt-korrodiert und aufgeblüht und hatte tatsächlich sogar das Rahmen-Sattelrohr fühlbar um 1-2mm geweitet. Man konnte fühlen das die Sattelstange fast 3/4 im Rahmen steckte. Leider Kapital gewesen so flog er dann doch auf in den Altmetall Container. Wir hatten überlegt es mit Gallium zu versuchen aber das hätte das Budget gesprengt.

If the bike looked that bad, you have to wonder what the rider looked like!!!😱 Awesome job!!! ❤️❤️❤️👍🏻👍🏻👍🏻

So therapeutic to watch!!

Gracias por compartir 👍 maximo respeto y mucha vibra positiva 😎

Your videos are very very beautiful I hope you continue🎉❤❤😊

muito satisfatório esse vídeo! parabéns deu vida a bmx

I'm guessing the first liquid you used was some kind of acid? That is some amazing stuff. I would like to buy some of that. The second must be paint thinner.

what did you pour on bike to remove rust and paint?

Hi, what product did use to remover rust from the bike frame?

If you ever choose to do a bike restoration again, I would advise to replace parts instead of refurbished because parts always have a lifespan on how many rough landings they can take before they break and you never know how much stress those metal parts have been put under prior to you getting a hold of it

Przepiękne jest to wykonane odrestłrowane BMX super jest to rower pozdrawiam twórcę tego filmiku 👍👍👍👍

DANG! Looks like this sucker got pulled up while magnet fishing. This is going to be an interesting resto FORSURE!

This was an awesome video but the way you did the tube in the tire killed me

Beautiful restoration

Amei essa cor que vc colocou... Qual seria o nome?

Hola.He hecho muchas restauraciones y en un principio limpiaba las cadenas,sin embargo al poco tiempo se cortaban,por lo que decidí poner cadenas nuevas en una restauración.Tambien me llamó la atención la facilidad con la que se extrajo el tubo del asiento ya que por lo general y con esa cantidad de óxido se requiere la aplicación de calor para soltarlo. Saludos desde Chile.

Nice work!

Hey, can you please share what chemicals you used to strip paint?

Good restore❤

im waiting for someone to weld a bmx drivetrain to the front of an adult bigwheel, and put road bike wheels on the back. i think end result would be fast

It's odd seeing more modem things restored on your channel than some of the others i follow. Its pretty cool to see how much even a few dozen years can degrade something!

We are redoing the same bike now…Mongoose. U gave me hope on some of the items

Yo tengo una duda, no sale mas caro arreglarla que comprar una nueva ?

rayie jdaan ant sanie muhtawaa🖤.

Those bearing went from old and rusty to new out of the box 😂 “come on man” just keep things legit…

Two thumbs way Up on the restoration !!!!!!!!!!!!!!!

you are fully equipped, you can get a broken bicycle but the damage is not too bad, I bought a bicycle for only IDR 100,000 equivalent to 6.5 dollars. a good used bike is only IDR 400,000 equivalent to 26 dollars. The bike I bought had to be replaced because the fork was bent, the frame had holes due to chain friction, the wheels had to be replaced because the freewheel was so hard that if forced it would damage the wheels, the spokes broke a lot, if repaired the cost exceeds the price of new wheels. so I had to buy new wheels, the old bottom bracket shook and bent the frame until it eroded the axle iron, replaced it with a box bottom bracket, there were no two inner tubes for the outer tires, the crank and chainring were broken and bent, the saddle was broken rickety. I invested all of that around IDR 1000,000.00 equivalent to 65 dollars. while the former is only IDR 400,000

Bro didnt realise their is an ajustable chain link used to remove losen and tighten the chain

This bike would be a 5.5/10 because some of the parts don’t belong on there and the one piece crank 😂

Looks alot better than before you put it under water to rust.😆

The restoration of the frame is good, but the replacement of the consumable material must be replaced, the replacement must be mandatory for the chain and all other parts, otherwise it led only for the exhibition,

That chain was quite flexible considering how rusty it was. Also why did you grind the link pin, why not just use a chain link removal tool?

That’s amazing. I have no words.

То чувство когда на этом бмх гайки и т.д,откручываються легче чем на мом

Супер работа. 👍👍👍👍👍

Felicidades.un excelente trabajo.

Knowing my luck, I would probably forget how to reassemble the bike or just loose one of the bolts

Sin palabras excelente vídeo un saludo muy especial desde Colombia

20:54 imagine brushing your teeth with that! Sparkly clean every day!

Geanta de pe față este VARZĂ fratele meu trebuie să îi pui alta 😅 FANTASTIC PERFECTYQNESS RESPECT 😍👍👍👍❤️😮🤟💪💪💯💯

Эпично хороша работа 🔥👌

I loved the video very cool to watch ❤

Excelente, yo tuve en mi adolescencia una Mongoose pro de salto tambien y era lo máximo y las BMX también eran excelentes 👍👍, Saludos desde México 🇲🇽👍

This deserves more views. amazing video

What its called the liquids you applied to remove the rust and the other liquid to remove left over paint ?

muy buen trabajo de restauracion ,pero las ruedas eran las mismas?

I love the fact that he bought new wheels, all suddenly spokes weren’t missing and the front wheel wasn’t bent

Unbelievable!! Bikes are usually a walk in a park for restoring.

parabéns cara, excelente trabalho!

Ficou mt bonita!

Вы просто молодец, спасибо ❤

Definitely brought er back to life bud. Should've sand blasted that frame but if you happy im happy for ya

Do you know what it is? Its like the perfect bmx bike to me

Have you learned all of these restorations on the fly or is it something someone has helped you learn?

That is an awesome thing to be doing! But WHERE IS THE GREASE AT?!?!?!?!

...lookin' good, great resto, keep safe...

Awesome build! Just be careful with those painted rims! Those v-brakes will probably wear through the paint down to the metal. But sweet none the less!

Great video! Awesome project! i love your attention to the details. :)

I got a dawn dishsoap ad!!

Parabéns cara

Amazing job!

Cool I had a old Haro 540 mirra air that was just like this Rusted very bad maybe even a lil worse was outside for 8 years but all I used was sand paper by hand took me 2 days came across some new rims n tires painted it red with chrome rims an teal color walls n sold it for $150 ... Lol

Poor thing… glad it’s fixed!!!!

1 week old rust

I miss my bmx sana all 👌👍❤️🇵🇭

great restoration..whats the mixture you added with the headset guard and bottom bracket bearing guard that turns that to black??🎉🎉

Nice job!

seeing you spraypaint brake sockets and threads hurts a bit. bike laquerers usually tape or otherwise close or cover every part that needs to stay true to measure, for pressfit situations like the bottom bracket and headset, for bolts and where brakes need to swing freely, and i hope thise brakes will grip after you painted the entire rimset o.O awesome job altogether, though :)

Compre agora mesmo a nossa linha pantene!

Please bro, help me to know what is the green liquid that you put in the pieces at minute 26:07, thanks. Your video is excellent, it helps me to continue gathering strength for a speedy restoration

That chair looks really good

27:45 *a wild new set of rims appeared*

Bom trabalho. O banco está com algum problema?

love that u heat treated it lol alot of restoration videos dont

So what was the clear liquid that removed the rust??

What chemical did you use to clean rust off? Some grease on pivots of brakes would be nice, and new bearings can just use balls without steel cages just need more of them. Chain was probably stretched... Not sure if it was worth cleaning. Other than that it came out great, paintwork is stunning.

Artificial rust ? Itd be cool to see where it came from before the restoration begins

The new wheels were a nice touch.

видео топчик

The 1st chain pushes the spindle, not the grinder. the rest is known

👍👍👍👍👍🤩

ficou linda

nice video... but the black parts souldn't been sprayed. that wont last. powder coating for the part and only spray the frame and fork

Wow awesome 👍👍👍👍👍👍

Thanks, im looking at doing this myself, recently whipped up a $10 marketplace special on a GT bmx

Que líquido me recomiendas para quitar el óxido en una bici cromada