Restoration Abandoned Go Kart Complete Process 

It's quite sad how slow an ashvelte Kart is. Our local ashvelt kart group to a race day (Grass karts) and we destroyed them. I recommend giving it some gears

Perfect 👍🏻

People always use these vertical shaft engines when they aren’t made for speed. There are 4 speed semi auto engines for cheaper and are definitely faster

That's not really that old of an engine or kart. It just has mud rubbed all over it.

@@worldssickestmedia2713 It's probably 30 years old

@@youbannedmealready5825 it's got vented rotors and hydraulic disk brakes. It's got modern Bridgestone tires. When he pulled the back wheels off the purple anodized aluminum hubs were still nice and bright. Anodized aluminum parts fade. Especially purple and red anodizing. The fiberglass parts aren't old, dried and splintered. The clear plastic material they use to make the fuel tanks usually gets a dirty yellow brittle tint to it it after about 10 years. The engine looks to be an air cooled IAME motor that's still in use today. That and I've never seen a road racing cart ever in the history of everything with mud all over it. Ever. Those karts are 2" off the ground and have slick tires. You can't get a road race kart to go in a grass field. Much less mud. I own an engine shop that specializes in two stroke race karts and motocross engines. I also hot rod Stihl and Husqvarna chainsaws for people in the logging industry. It's an older cart that's been sitting up for a while and someone rubbed mud all over it to make this video. That's one thing I know for 100% certain. They rubbed mud all over it. And if you do want a vintage 2 stroke engine restored. Get in touch with Absolute Engine Solutions in beautiful Lake Lanier Ga and I'll get ya hooked right up.

That's what I'm saying

does it matter

wow

I thought it was a little too shiny when he was pulling parts off.

100% agree.

@@victorzimmerman2248 Yes actually it does matter, because if it was truly aged he wouldn't be restoring he'd be replacing shit. Those bearings would be completely locked

@@jamesvigor6409 Sincerely, I'm genuinely moved by what you said. I have a seizable amount of money that I am willing to invest if given the appropriate knowledge and I am highly interested in investing. My greatest concern is losing money on a bad investment. I'm open to hearing your advice on how to make sensible investments as a result.

@@marcelrobert9569 Would you mind recommending a specialist with a variety of investment options? This is extremely rare, and I eagerly await your response.

@@charlotteflair1043 Having a counsellor is essential for portfolio diversification. My advisor is “Julie Anne Hoover'' who is easily searchable and has extensive knowledge of the financial markets.

This can Happen if it Sits in the Garage or a shed for very long

@@JMEproductions yes in this case its obvious

Yes go look at all his video mud spread over all them nice and even

Could be from a flooded garage

@@ilya0music almost every video he does looks like muds paint on with brush

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-foZ81RsdpAA.html

It really bothered me that they ditched the 100cc. Those engines are FANTASTIC.

Jo no

You speak my mind

مةىنى

You do realise the kart was artificially aged right? he reversed the video. also this is not how corrosion looks like. its practically impossible to restore anything withotu replacing all parts.

@@faziolifairmont8125 thats the point of the comment

Nailed it! These videos are just click bait.

yes it's because people are brainless and will believe anything🤣😂🤣😂

Yep, a mixture of vinegar, salt, and hydrogen peroxide will get that rust look easily. Notice none of his videos ever show any pitting from the rust.....you know, like all rust does.

@@kalel33 they are like movie cars restore it to look good on camera you can see all the tiger striping on the paint when he spraying

Thought the same damn thing. Just a kid and a camera at this point

That’s exactly where I call bs when I saw the tires

im so glad im seeing comments like this...smh. the aluminum parts were still brand new looking, and the rust was already coming off with a plastic wire brush lol.... im sure we all have seen how equipment really looks after sitting outside after only a couple years if not 20 years

Tires not tyres

@@kyleball8396 its spelled differently in europe my friend

@@treyshelby2965 Tell 'em Trey!

If your kart is 30 years older than this then yours was made in the 60’s

@@assumingone4366 80s

@@assumingone4366 what?? Its 2022 so it would be 2002-1992

@Jadyn Farrell The video was made in 2022 but the description says the kart itself was made in the 2000s. That could be any year between 2000 and 2009. Definitely put his kart somewhere between 1970 or 1980

Bc that's exactly what he did lol.

And he put it back together dry, no oil or grease was used!

Yep, I thought the exact same thing.

My words and thoughts exactly. What a waste!!!!

not to mention the caster and such wasnt set at all on the front end, i own one myself and haVE THE YAMAHA KT100 ON MINE THING RIPS

@@jasonmaheux4216 that has got to be one awesome, fun time on that. Those 2 stroke TAG or shifter karts are no joke!!! FAASSTTTTT

Agreed, WD 40 isn't that good at loosening rusted nuts and bolts!!

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-foZ81RsdpAA.html

Exactly. It only needs a jetwash and it would look good again. But, I must get some of that asian wd40 as it works better than the rest of the world stuff. They think the rest of the world is thick to think something like that has been sitting for many years in all weathers and finally getting restored.

You can get this type of rust in just a few days with vinegar, salt, and hydrogen peroxide.

he probably did it out of boredom

does it matter

@@victorzimmerman2248 yes

ااامللو😢😢😢😢😢😢بببف🙄🌚🌚🌚🌚🌚🌚🌚🌚🌚🌚🌚🌚🌚🌚الاتنايسي

ابنتوبنلق😢😢😢😢😢اقهبلل

وب نتله🎉😮😮😮😮😮😢😢😢😢😢

Did you see the brand new engine that was put on. it was made slower than original

Hahahaha

👆👆congratulation you have been selected among my shortlisted winner's.👆 👍👆

winners*

It does look suspicious, the surface rust and mud looks like it was put on purpose so it could look worse than it actually was, click bait

Yeah, this is typical Internet fluff …

I don't get why so many "restoration" channels do this... there is so much old crap out there to restore for real. You can tell from the exhaust pipe that a leaky corrosive substance was sprayed. Probably some sort of peroxide solution. You nailed it.

@@TheJimCramer Because it'd take much more work to "restore" it. They'd have pitted metal from the rust and you'd have to do some major grinding or bondo to get an actual rusted item back to the way it was new.

even the nut and bolts dont corrode

Cause they can't rebuild shit only Clean.

lol the whole time I'm thinking...where's the power washer?

Worlds sickest, that's all you have to say.

Да видно постанова. Неделю в луже простояла...отмыл🤦‍♂️ Ебать мастер🤣🤣

Им бы Советский Жигуль, который лет 20 стоял на улице... Я бы посмотрел на такую реставрацию 😅

Главное шины покрасил)))

Race engine 100 CC have 25hp

12hp 390cc engine to be exact.

20 to 22 depends if its a rotax or a tag @@davkemerke6084

Самое ужасное, что гоночный Rotax заменили каким-то говном с Али.

@@anatolyshestakov764 именно, и в нём нет и половины мощи исходного движка.

@@anatolyshestakov764 из хорошего карта сделали очередное ведро с двиглом от мотоблока 😂

И заносили аккуратно - чтобы грязь не обсыпалась😁

👆👆congratulation you have been selected among my shortlisted winner's.👆 👍👆

I guarantee they didn't. This is a brand new kart.

Restoring and recording anything like this is worth it for other people.

@@roberthardy2013 Not really. He washed it and called it a restoration.

Think im gonna have to call horse crap. Noones going to leave a 5k racing kart outside long enough to "rust" and rust doesnt come off that easily.

on a cart like this you don't use a motor like that. you build one that is made for racing. that motor would get killed by other carts.

👆👆congratulation you have been selected among my shortlisted winner's.👆 👍👆

You can use zinc to make rust skin

@@tbladee i think he's being sarcastic :)

Because he's a loser and doesn't restore anything. They saying everything down with salt water and vinegar let it rust for a week and do whatever she did in this video.

He not

I have a margay brava 4.2 from 2004 I believe. It’s well worn, and I can pull if every bolt no problem. Karts don’t get thousands of miles on them or exposed to salt and shit like a car would

👆👆congratulation you have been selected among my shortlisted winner's.👆 👍👆

I want a dirt bike

Power Ranger bike

you took the words out of my mouth. I died on the inside when they put that motor on there. Took the top speed down to 20 or 30mph as well as ruined the scream of that 2 stroke

@@jaredlinde590 I guess it's not completely safe to ride on a go cart with such big motor near your head

Yall when the 4 stroke went on it went down hill-- I can't see why anyone would run a 4-stroke back when I was racing (over 45 years ago) at the time a modified 4-stroke Briggs would cost about $1500 and a Yamaha KT 100S 100cc piston port was about $600 blue printed on the Yamaha you ran gas Briggs methanol on the Yamaha you adjust flex and differing gearing and that was it the Briggs you had cams, porting, valves, carburetor, clutch and the list goes on and it was no faster than the Yamaha.

That is infact a 12hp 390cc 4stroke engine. When set up right that engine will tun circles around the old motor. BUT I agree, he should have saved the old motor instead of replacing it with a modern motor.

I stand corrected, some of those 100cc racing engines can have as much as 25hp. That is insane. (did a quick google)

👆👆congratulation you have been selected among my shortlisted winner's.👆 👍👆

Acho que você está com razão, foi isso mesmo que aconteceu.

So true

ikr those engines are just faster and they sound better

@@unkn0wn_racer They have the potential to make almost 3x the power.

@@youbannedmealready5825 they both could make triple the factory numbers. I had a gx200 pushing 20hp....

@@dewworm1666 Except one makes those numbers right out of the box..........

@@dewworm1666 you ran it on jet fuel or something ? cause a regular gx 200 stock is pushing around 5-6 hp

thanks for watching you have been randomly selected among our winners for today contact the above number to claim👆👆👆..

100%

he did. look, later, in the video. he uses brand new ones.

Not to mention it looks like he reused them damn brake pads...That made me mad because you should never reuse bad brake pads, it's dangeroous and practically a death wish waiting to happen.

@@adriengrossfeld5660 It doesn't matter if you don't have a clutch to stop anyway lmao

was thinking the same thing. look like the dipped it mud over a weekend and to a flap disk to to paint to make it seem worn.... plus dose not matter how much wd40 you spray it you dont have clean threads it would take some wiggling

It is, he made it looks dirty

Yeah, I notice that 🤔

Does it matter? It is still satisfying to watch

@@elektronikadlapoczatkujacy2111 it isn't and the fact someone will probably has to explain this to you is so depressing I won't even dare going there

Because they can't fix engines LOL

Because they probably didnt have the equipment to start it

No clutch

thanks for watching you have been randomly selected among our winners for today contact the above number to claim👆👆👆..

Mind you it's easy to remove the rust and grime when the kart hasn't actually aged that long. The kart in the video has been artificially aged but all the hidden parts look amazingly clean. Should give away weŕe not watching a skilled restorer doing his magic.

you can really tell on the exhaust system they spray patina'd it with stuff to rust it. The way all the dirt looks so evenly distributed looks weird too

Those rear hubs are new

👆👆congratulation you have been selected among my shortlisted winner's.👆 👍👆