Restoration Hammer Drill USA Old | Restore Drill Electric Large Capacity Max 

i'v said before subject matter is key...and you don't find better quality than vintage made in america

@@imperialpresence3331 made in Germany for instance.

@@Super4017 i'd say pretty much anything pre war european...but as far as america it's a matter of shear volume..we never had factories bombed or invading forces to hamper our production post war...and as far as our southeast asian brothers...many of them have only have dependable electricity for a single generation

@@imperialpresence3331 .

What are synthetic or rubber hammers for? I dislake 👎 👎

Old good stuff

Send him one...

Haahaha I was just about to comment similarly

@@superbmediacontentcreator hola buenas tardes como estás 😘🤵

Also his screw driver knife ... I believe he loves it a lot

😊@@superbmediacontentcreator

These immature people who dislike are simply hatets

Thats right Curtis. I am crying blood with the bearing assembly...

R. Mo yeah I was thinking the same thing lol, especially when reassembling it, but I guess he knows what he’s doing and how to use the hammer without damaging the parts🤷🏽‍♂️

He should put the bearings in the freezer inside a plastic bag allnight before puy them innside their respective cavities, that should slightly reduce their diameter enough time making easier job wen asembling it

U like salt?

I have pepper. So can't we be salt and pepper? Perhaps with some fresh noodles and greens? That guy knows his job. He did great regards of all the negative messages people send. Sometimes this kind of video's may be a learning curve for the people who made fun of him..... of you think you can do it better, let me see. Greetings from the Netherlands

The video is reference

И шпатлёвкой заделывать дыры на алюминиевом корпусе отбойного молотка)))Это топ конечно!)

@@linniksamsung пластилином было бы и то надёжнее xD

Александр Линник , сварочник, не не слышал ;)

@@linniksamsung как зделать полезное нихуя? правельно зашпаклевать дыры !!))

@@linniksamsung Про шпатлевку верно подмечено)))) Отбойник наверное в музее на выставке стоять будет)))

DEPENDS ON WHERE THEY ARE HAMERED

Caps not needed my friend

Just got to know how to do it.

He needs to invest in a hydraulic press

@@joseortega1114 just use a car Jack

Согласен полностью, -сколько прослужит этот инструмент? (я думаю--не больше полугода)

Это фейковый ремонт

@@anonim4655 косметический

Ну судя по лайкам, с тобой согласится 100 человек из 1000, делай выводы почему общество не ценит твои убеждения и следовательно платить тебе будет только 1 из 10)

Pool of candidates who to ask help I'm sure of for your

Please 🥺🥺 pool and a good 😜😜oprice🥺 🥺🥺🥺🥺and p please 🥺🥺🥺

Ok 👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻 of 😄o😄 pp clock is pleased👌🏻👌🏻👌🏻👌🏻👌🏻 of o

Maybe he has very angry wild animals out there, and never Knows wen some of them could show up at the garage door 😆

you are awesome

madox76 - depends on how stuff was packed. I've had stuff come from China in well packed parcels and it's immaculate; but stuff sent from somewhere just 40miles away turns up broken and damaged.....mainly because it was badly packed up. Just the luck of the draw.

???

@@Tracy137 Well for one thing this definitely wasn't shipped from the US in that packaging, you can tell because the english isn't great and its the same handwriting. secondly if it was from the US the postage would've been intact at least not handwritten, also the boxes are from Vietnam as well. thirdly and finally the US does not allow packages to be sent without a return address and and name any longer after all the anthrax scares after 9-11.

Canuck exactly

I like the video, I hate the music. All I want to hear are tools

He is using a kitchen knife as a tool do you think you can afford a hydraulic press?

Just take pictures of each part you disassemble and you won't be lost.

Ahh well he is recording it too. He could always go back to the video. Smart

Я считаю если занимаешься этим делом ,то и инструмент должен быть соответствующий а не мультитулом разбирать.криворукий блогер а не ресторатор

25:07 Bare my english, but painting parts with 'silver', as if this look was caused by liquid bath, is a bit deceiving in my opinion. It may be possible to create almost this bright look to aluminium using sandblasting though.

OSOCO that’s ridiculous, how deceiving is the chrome finish on your car people spend $$$$ on? You think it’s real metal?

OSOCO Also how deceitful is it when he actually shows you what he’s doing??? He’s not hiding anything.

@@enegron6987 For both of your comments, this has nothing to do with chrome finish or any other process or paint - no matter how fancy. I said "painting parts with 'silver', as if this look was caused by liquid bath". Do you not understand that? Hint: "AS IF". If that look is NOT created with paint, and it's caused by this liquid instead (which impression he tries to make in the video), my criticism is obviously useless. I have seen this done by other restorer also.

OSOCO my mistake time stamp says different. The impression I got is 24:05. But wait, are you saying that at 16:35 that “liquid bath” didn’t create the look we’re seeing and it’s painted instead? Btw my impression of “liquid bath” is what chrome dipping is, hence chrome references which is what I understood you to be saying about 24:05. But you’re actually saying he painted the parts silver at 25:07??? Just trying to understand

På så vis får du pop pp

*they see me restorin* *they hatin*

Rodi Kalicharan I guess that’s where the saying comes from “a poor workman blames his tools”, which this guy proves that it’s not the tools, but the technique and ingenuity

Peter Swarts enviaré ya no te esperen bardo re una mierda f

Yeah its not very professional looking without sandblasting and filing the imperfections away. Looks like a quick one day backyard restoration type of thing.

Or a piece of wood between the bearing and the hammer.

Muito bom top,

If you are professional diesel mechanic and say, this guy fixes the tool, please give me address of your workshop, I would remember to not come there :). Seriously? A hammer for bearings? Cable connection with oxidized copper wires? :)

Тож заметил сию фигню,а в целом конечно он молодцом!👍💪

Бесит это только тех кто подшипники видал только на ютубе ;)

@@StanislavG. Я подшипники на валы ставил, когда ты только под столом ходил. Подшипники воспрещается забивать молотком во избежании перекоса и защемления подшипника.

@@don_Alonso_di_Almeyda_i_Valdes Ну ну, расскажи мне :)) Теоретик блин. Сходи лучше на заводе поработай, и не такое увидишь :)

@@StanislavG. Спасибо, я уже поработал на заводе рабочим. Поэтому я закончил ВУЗ, чтобы не быть вечно в масле.

It's a nice noise maker, I have it in the background while on reddit. When reddit bores me I watch a couple seconds then hop back on reddit.

Yes he paint it

I don't know why he need to lie

@@momenegypt2 You are right, he doesn't his work speaks for itself

Silver frost paint

Give me some acid and metal nickel and i will make gears/any metal surface shiny (also, corrosion resistantly). But here ... If he do such a procedure, why not show it ? I think youre right. Gears replaced by new or painted. Same i think about rotor.

The armature looks to have been rebuilt, which is not difficult if you have a coil winding machine. The commutator is the giveaway, it looks like it was cleaned rather than replaced. The plastic handle is readily available online, I found at least a dozen different brand names selling the same type of hammer shown in this video. The solution used to soak the gears could be either quicklime (calcium oxide) or lime water (calcium hydroxide), both are powerful bases and have a milky appearance when dissolved in liquid. I don't recommend the use of either because they're dangerous. Quicklime has an exothermic reaction when introduced to water, and can explode. Also since both are powerful bases, they can cause nasty burns. If you need to degrease gears, use a degreaser and wire brush. Caustic bases damage metal, as do acids.

Parts are readily available for this jackhammer.

I work in repair of inground pools and our cheap chinese jackhammers literally look exactly like this. looks like one that got left in the rain , I assure you this tool is not old, maybe the design

How much did it cost to do this restoration and how much will it when buying a new one?

Not sure where anyone claimed it was old, just a discarded and abused tool that needs repairing.

Somebody has to leave the window next to the cage open on the next cold night, that should take care of that

Phạm Nguyễn Hồng Hải zIm , I'm sorry but I think your comment is out of order,some people just make comments because they think they're smart and trying to make a point. That's why this world is full of shit.

Just a point less shit 😂😂

Важен результат. Без умения можно и киянкой всё угробить.

Came here to ask the same thing. I’ve seen several videos from guys in Asia using that milky liquid for rusty parts and the parts always come out looking great.

I think it's some kind of acid or just baking soda and vinegar and salt or neither of them

He actually just painted them silver. You can see the paint coming off when he reassembles it. The milky liquid was just for show.

@@jimfonville8622 I was so excited when the gears came out of the "milk". My parts don't come out of any of the rust removers I have used looking that good. OMG WHAT IS THAT MILKY LIQUID, I GOTTA HAVE IT! Then, close up of gears being reassembled...hey, that finish looks like paint! [also...given the mess inside all, of those bolts came out waaay to easily they were already out recently. Have seen comments that a lot of restorers do that for the sake of the video. If someone doesn't, it is pretty obvious.]

RKG...Yah lets forget about safety and the environment...Moron

that's because by freezing they shrink

ну да,молотком по подшипнику это жесть...а в целом zae...bok))

Дoбpый Koт Какой УСА??? Это Вьетнамец реставрирует американский станок:)))

@@АлексейЖуков-х9ы тода ещё хуже. в УСА не нашлось специалиста со съёмниками, кроме как отправить в другой конец света "специалисту" с молотком.

@@opko4746 всё проще!!!В УСА и цены за ремонт УСАшные, а данный спец. сделает в разы (!)дешевле.)))

@@АлексейЖуков-х9ы да это понятно!Ну чисто поржать и заценить старания...

ему насрать - 3 ляма просмотров же есть

Да везде забивают молотком.

Это ещё, что - на России болты молотком забивают

У бомжей в России инструменты лучше в сто раз. Это вообще рукожопы какие-то.

Блин эксперты собрались, заткинесь и листайте дальше. Как будто этот чувак переведет прочитает ваши кометы

Send him one.

It would be a scam if he asked for money or something. These guys just want more international views. The US is obviously the biggest market. I would call it a cute try not bullshitting

Some of us don't have a press bud

@@aaronraida1882 then make one from an old bottle jack....easy as f.....