Restoration of the Chrysler 218 Straight 6 Flathead Engine PART 1- ASMR

Подписаться 40 тыс.

Просмотров 1,3 млн

50% 1

#flathead #restoration #asmr
I recently purchased a 1949 Plymouth Special Deluxe 4 door sedan known by its engineering code Model P-15. It’s engine needed everything and a machine shop would charge me easily $3,000 for all of the parts and machining. Enter: Facebook marketplace. I found a $200 dollar 1952 engine out of a Plymouth crab room for sale a few miles from home. The owner sent me a video of the engine rotating freely and I zoomed across town to get it. This video shows be prepping this engine for its first start. This video is part one of a two part series.
Check out Parts & Restoration on Instagram!
partsandrestoration

Хобби

Опубликовано:

22 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 990

@marksettles6695 2 года назад

There's professional big budget you tubers screaming at this video about your methods. I'm 60 years old and have seen more engines rebuilt exactly like you're doing it than any other way. I watched my grandpa and uncles rebuild engines in the dirt at the oval tracks and win. Dude, I'm subscribing because of the no frills no bullshit practical way you do things. Great videos.

@partsandresto 2 года назад

Thanks Mark!!

@tomcosgrove3673 2 года назад

Point taken, I remember seeing an old guy in my neighborhood take a red brick and water, and a lot of patience, resurface a flywheel. It looked beautiful.

@johntripp2028 7 месяцев назад

This is not what you do if you want reliability and or performance. He gains no respect from me. I’m not a big budget mechanic and sometimes I have had to “make do” , but this is disgraceful.

@JamesMorse54 3 года назад

I rebuilt 3 or 4 of these, we used them for our irrigation pumps... solid old beasts.

@partsandresto 3 года назад

Indeed, nigh indestructible.

@mrtechdeck500054 3 года назад

little tip I've learnt when it comes to gasket paper, tap it with a ball peen hammer when its placed on said object you need it for. Tap around the areas that need cutting out and it'll just sheer off. Great video man :)

@partsandresto 3 года назад

Great tip bud! Thanks!!

@williambutler3269 7 месяцев назад

I'm inspired by this video! Half of the worth is that you don't interrupt the video with talking!😊😊

@markduncan6690 Год назад

Thankyou Sir for a “No Nonsense Teardown” No crazy monologue to listen to!

@Baldskul 3 года назад

Nice to see a guy fix things without all the fancy equipment, just ingenuity and hard work.....well done!

@partsandresto 3 года назад

Brother James, thank you sir!

@levivogel9029 3 года назад

It's good to see a real restoration.all of the parts are thoroughly cleaned. Keeping it as original as possible. Instead of cleaning the big parts and putting a whole bunch of new small parts on it.

@BillSeipel 3 года назад

There's a right tool for every job. He's got 'em.

@mickymaus2104 3 года назад

I Wish this time Chain would be in modern Cars....today the chains looks Like a bycicle Chain

@Baldskul 2 года назад

@@user-hv1ch5uc5d what difference does that make, I just like his ingenuity.

@jackmoorehead2036 2 года назад

Shades of my youth, we had a 53, Mayflower 2 door wagon, we pulled and rebuilt the engine in 59. I learned a lot from that. Including making gaskets and rebuilding carbs, starters and pumps. It is becoming a lost art of fixing components. Thank you for sharing this.

@oldtanker4860 3 года назад

Classic old school shade tree mechanic work there. Nice to see someone has the skill / knowledge to make their own gaskets. I learned that back n 69 working on my first car. Well done.

@robj2704 3 года назад

In my teens, I worked in my father's garage in the early 60's and learned a lot. Your engine is a good candidate. You're doing a good job. These were pretty low compression engines and the tolerances were not as critical back then as nowadays. Your engine should run just fine for years to come.

@partsandresto 3 года назад

Thanks rob!

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@NotSoCrazyNinja 3 года назад

Crusty... You know, I never really thought I'd watch a video like this, but it's quite nice and kind of soothing seeing someone restore something without all the yapping.

@partsandresto 3 года назад

The yapping ruins it...

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@candlestyx8517 3 года назад

This is one of the things that irritates me about chrisfix, he never shuts up

@williamcleland9750 Год назад

Man I love your videos. I just retired from 40 years of medicine. Learned to drive in a 1947 Dodge four door fluid drive that I still own. I have dreamed of restoration but to date lacked a lot of time energy and know how. Now however I am inspired, thank you. WJDC

@ciscosservices8167 Год назад

Nice no fancy CNC machine no special order parts he rebuilt original parts he made his own gaskets he bore out the piston and cleaned everything with typical tools and did a great job thank you sir

@tevinabeysekera6038 3 года назад

If only Chrysler put this much dedication nowadays.

@huntingboost8446 3 года назад

This is the type of videos we all love and no one can disagree

@partsandresto 3 года назад

Yupppppp thanks brother enjoy! Don’t miss part 2

@huntingboost8446 3 года назад

@@partsandresto I am watching all ur videos one by one don’t worry😂 Just keep like that brother!

@partsandresto 3 года назад

@@huntingboost8446 haha! Enjoy dude!

@mmcshaffry 2 года назад

I swear every time I run into a snag on disassembling my flathead 6 I just watch your video and and BAM the solution is right there in front of me. Wish me luck - the manifolds are next....gulp.

@partsandresto 2 года назад

Good luck bud! Happy to help!

@hitekrednek66 2 года назад

Dude...thank you for posting this vid! You obviously are gear head from way back and watching this vid and some of the old school tricks you did that I had totally forgotten...just took me back! I am a retired firefighter and noticed you were a truckie...thank you for your service as well! Stay safe sir!

@partsandresto 2 года назад

Haha. Glad you liked it brother. Mostly just making it up as I go. Make sure you watch part 2

@757warbirds 3 года назад

claw hammer and kitchen sink this takes me back 55 years ago when my dad used to run modifieds 36 chevy coupe and build the engines in the kitchen as the garage had no door and a dirt floor

@partsandresto 3 года назад

Haha. I’m living it brother. My dining room table is covered in pistons and parts and my sink is full of grease

@raylarkin5004 3 года назад

Ditto Jt👍🏻

@albrighttopover 3 года назад

GREAT

@gusgiesel 3 года назад

"Wrenching in flip-flops" A power washer would come in handy several times here. But I feel the old-school vibe going on here.

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@mannym5692 3 года назад

Yap I would spray with degreaser first, wait for 15 minutes and give it unforgettable pressure wash But this is his project and he's deciding how and when to do it And we all have to respect that

@MatthewSmith-to1hz 3 года назад

I love inline 6 engines. they may not make as many horseies a V motors, but the durablity and torque production is second to none.

@partsandresto 3 года назад

Without question. Thanks brother, we’re in agreement t

@MatthewSmith-to1hz 3 года назад

@@partsandresto awsome

@novanut1964 3 года назад

just like you, i spent hours hand cleaning my 1963 olds 215 aluminum v8, before completely rebuilding. good video.

@partsandresto 3 года назад

Thanks brother, Thant’s what it’s all about, I’m glad you enjoyed it!

@lexioncombine9403 3 года назад

I've been pulling wrenches over 30 years, never seen scotch tape used as a gasket template. Thanks for teaching an old dog a new trick.

@partsandresto 3 года назад

You got it!!

@kamoboko86 3 года назад

There is nothing like watching a man work in sandals. So classy and not nerve-wracking at all. lol

@partsandresto 3 года назад

Hahaha. Get used to it, it’s the only way I roll

@jacquesfontein714 3 года назад

Me 2 and I'm restoring a Desoto Special Deluxe 1946 p15

@joewilson2258 14 дней назад

For me I think that these engines are one of the best engines no matter what company who made them were the best engines to be built because they were easy to repair by even if we were in our early teens by our own hands.

@mattmccain8492 3 года назад

Nice. I rebuilt a 63 chevy 194 inline 6 like that in my backyard tool shed. Built it from the best parts from two engines and parts off a couple others. Been driving it everyday for the last decade.

@barnyardkh4 3 года назад

Just (4) words to add to a great project...."Pressure Washer" and "Safety Shoes"!!!

@partsandresto 3 года назад

Hahaha. Safety shoes are for communists and cowards!!! I do need a pressure washer though

@mrgremer357 3 года назад

@@partsandresto and a sandblasted!

@barnyardkh4 3 года назад

@@partsandresto I would suggest at least upgrading to close-toed shoes before pressure washing though. Stripping the skin off the top of your foot, while being non-conforming, would not feel good! Lol!!!

@wenskwensk7933 3 года назад

@@partsandresto just for first safety, i can see a blood in your finger 7:18 for not use a boots or simple shoes🤷‍♂️🤷‍♂️ Edit: i can see blood again in 7:25

@getoutmecar2940 3 года назад

Oh and a metal wire brush

@rudyduarte6160 3 года назад

Thank you friend,you'd brought nostalgic memories of my younger years,I remember those floating power little 216.One time we played starter races on first gear,and I can tell you those starters are mighty strong.

@partsandresto 3 года назад

Awesome Rudy, I’m glad you enjoyed it brother

@randallrice8727 2 года назад

This is an amazingly helpful channel! Thanks for documenting all this. I am rebuilding a 50 Plymouth engine that was in my 49 Plymouth. Your videos are helping a lot! This is a legacy project. The car has been in our family for over 70 years. My grandad was a Mopar mechanic for 30 years (30 - 60). When he had to stop driving due to dementia, he handed the keys to me. I drove it in H.S., but then, sadly, I let it sit for too many years. I've been working on it for 30 years! My goal is a reveal in 2023. Thanks for your help!!!

@taraellis8279 Год назад

Ummm sooooo question? Are you going to post a video? Id love to see it! Im so sorry that your loved one had dementia.

@zjw3504 3 года назад

That what I love about cars from the 30s, 40s, and 50s, is alot of things are serviceable! Like water pumps, starters, fuel pumps! Great video!

@martint766 3 года назад

Those flip flops are killing me!

@partsandresto 3 года назад

deep breaths martin

@MrPiimpslap 3 года назад

especially with how much grease and grime you got on them, you should've put some gloves on them, lol

@RedDFilm 3 года назад

Finally - a guy that cleans the engine before he works on it :)

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@user-sh6tj3ch7c 3 года назад

@@audi80b3samodelkin5 شضششش

@WombatHide 3 года назад

I said that aloud to my wife. Crazy how many want to work in filth rather then a quick clean beforehand

@toyotafan1234 2 года назад

I use to do engine restorations like this until I discovered brass and steel brush drill attachments. They make life so much easier!!!

@larrydunlop378 3 года назад

Your doing a Great job. To anyone who doesnt know anything about these motors.They are such a nice smooth running engine. They just purr. They had a hard time starting in the cold weather and running good on damp,rainy days. Switching them out to 12Volts is the key to making them start and run good. Thanks for the great video series!

@travispoppler8023 3 года назад

Even with time lapse you can tell there's a lot of work to this. Nice job.

@partsandresto 3 года назад

You said it Travis. Many weeks worth of work displayed here

@chrismiller9948 3 года назад

Just wanted to say how much I appreciate a rebuild that goes for functionality over obsessive "restoration" that tries to make everything look new. My kind of guy.

@partsandresto 3 года назад

Thanks Chris! That’s it man. Get ur runnin and enjoy it

@blevinsspeedandrestoration9451 3 года назад

Thank you for sharing! Nice to see a simple easy, not over the top super expensive restoration done

@colinmartin9797 3 года назад

Most amazing part to me was that as a guy on a ladder company You didn't hit it with an axe or a sledgehammer even once. I didnt think you guys even knew how to use any other tools. Love from the aid car. ❤

@partsandresto 3 года назад

Hahahahahaha

@mohitsharma9851 3 года назад

You guys are ACTUAL creator's who create content, and you specially a one man army I'm a new subscriber to your channel, I really appreciate all your hard work, thumbs up man.👍

@michaelhill2844 3 года назад

I never knew the Munchkins made a few albums. Neat!

@philjerome9795 3 года назад

I have found that the big mortar mixing pans you can get at the Home Depot or Lowes are great for catching nasty grime, or whatever. When I'm done, I just wipe them out into a bag. Also good for dropping transmission pans, no spillage.

@benphillips4423 3 года назад

Next time you try welding a nut on a twisted off bolt weld a washer to it first then weld a nut to the washer so you have more surface area welded.it will hold up better

@partsandresto 3 года назад

Thank you Ben, great tip

@RicardoMartinez-kr5qk 3 года назад

So satisfying, you know he's legit cause he works in his flip flops

@raylarkin5004 3 года назад

Saw that.🤣🤣🤣

@peternewson2275 3 года назад

Those are tactical, OSHA approved flip flops. Can't find those at Walmart.

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@pabloflores2870 3 года назад

Exactly what I was thinking, legit..

@lenBrill1971 3 года назад

scotch tape gasket template? I just learned something new!! Excellent vid, had me smiling the whole time👍🍻

@bighoss2028 3 года назад

Same here that is genius

@partsandresto 3 года назад

That makes me so happy. I’m glad you enjoyed it and learned something

@gordondick9100 3 года назад

I've made way too many gaskets the hard way, scotch tape from now on!

@leberwurst9397 2 года назад

So satisfying when you finally get everything clean and ready to go!!

@brucestuart8180 9 месяцев назад

I had to stop in the middle of this video to say how awesome these videos are. I love the close up shots of everything and exactly how you break things down and clean it all up.

@bighoss2028 3 года назад

Absolutely love is and laughed a little to hard on that manifold removal 🤣 the WTF and stare was hilarious

@partsandresto 3 года назад

Hahaha

@robertschaap5342 3 года назад

Nice work! love seeing work on the old engines and not another LS motor. Love the sandals I do my best work in mine. I subscribed.

@partsandresto 3 года назад

Hahaha, my kind of man. Welcome aboard sir. Come visit on instagram

@cshaffadonk717 3 года назад

That lead pencil and scotch tape trick on the oil pump is an awesome idea!

@partsandresto 3 года назад

Thanks! got the idea from how cops lift fingerprints. Figured it would work and it did!

@raadraad2887 3 года назад

I watched this video 3 times. Nice video, and this machine is very powerful, not like machines. Now we had a Dodge Plymouth Grandbrook, the same machine. The first car in which I learned to drive was a 1953 model and learned the mechanics. Thank you to the owner of the video who reminded me of my youth days when I was only 15 years old.

@partsandresto 3 года назад

You got it my good friend. Hope you watched part 2!!

@lollo89806 3 года назад

You had my curiosity, now you have my subscription. Glad I stumbled upon your channel. Merry christmas from Finland!

@partsandresto 3 года назад

Welcome my friend. Merry Christmas to you as well

@chuckhaynes6458 3 года назад

Moving right along. You are doing the best you can with what you have. Did you mic the cylinders for taper? Good thing Chrysler made those great 6's for a zillion years. I had a 1933 and it was close to the same except for the water jacket. I still have one in an old welder I bought surplus. Keep up the great videos... I wanna go for a ride.

@theophilusjackman6055 3 года назад

Great video. Helped satisfy some of my curiosity without tearing into my 230ci Flat Six. Thanks.

@KyleGreenhow 11 месяцев назад

this is a great video, so many of us "gear-heads" think about doing a project like this without really understanding what we are getting ourselves into, this video helps show me the reality of such a restoration, this is a huge project, kudos to you for doing it!

@joeschlotthauer840 3 года назад

9:30, precursor to the dilithium crystals...

@1000yoeyoe 3 года назад

this man is chaotic with his ways, but I bet it always turns out to work lol

@partsandresto 3 года назад

Haha.that’s me Conor!

@Falconurbex 2 года назад

Being a mechaninc myself i absalutly lv stuff like this, taking things apart and rebuilding them and seeing them work has they should do gives me a sence of great pride, so well done on this project, and thanks fot sharing, stay safr and see u in your next video.

@Pointman-yf6or 3 года назад

Hey guys, I have this engine sitting in my barn. Spun the bearing on number two rod, and broke the piston. It’s all there including the transmission, clutch, pressure plate ect. It’s out of a 1949 Plymouth business coupe. Going to replace the rear end too, 4/56 gears. Put a 350 Chevy and trans in her. Oh yea, got split manifold exhaust and big carb with manifold like I said, just pulled it out and set it in the barn. Just watching you clean that one up makes mine look brand new. From what we can tell, broken rod bolt caused the damage. 56,000 miles. I would sell it.

@trust_meim_a_lawyer5950 3 года назад

Wow, if my wife EVER found out I was cleaning car parts in the kitchen sink the punishment would be instant death :P

@partsandresto 3 года назад

Better to be single, sometimes

@petemarciano 3 года назад

In flip flops yet!

@Ron36415 3 года назад

Nice, did the same thing with the one out of my power wagon a few years ago. if you'd like a little more power shaving about .060 off of the head, pertronix ignition and an edgy speed shop cam made mine a lot happier. also if your reusing the old oil pump the gears tend to chew up the cast cover, finding someone with a surface grinder to smooth out the cover will give you much better oil pressure

@rossboyd2272 3 года назад

There aren’t many people like you , any more. I built my first engine at 11 3-1/2 hp brigs for a go kart I pieced together. At 13 I was working on my brothers friends cars . At 15 I built a 352 Ford truck that had a 300 six which I removed . I’ve painted I weld I do my own carpentry I’ve worked as a pipe fitter . I went through electrical training and college to be a machinist. When I said I paint that’s cars as well.

@TheDestinyends1975 3 года назад

I liked the way you restored the engine. We have a word " Machine does ,hand will be praised" But in your situation , hand did and the hand should be praised, welldone sir

@partsandresto 3 года назад

Thank you!!

@joeschlotthauer840 3 года назад

*Put a teaspoon of septic tank cleaner in each of the freeze/core plug openings, and some in the water jackets...*

@partsandresto 3 года назад

Ooh good idea

@legendarepa_0127 3 года назад

Почистил и мотор ожил , так не бывает. Димиксид в помощь и поршня новая отрастет

@kuvaldolet 3 года назад

на продажу пойдет😁

@user-bg6zf9bv2w 3 года назад

@@kuvaldolet этот двигатель от газа 52?

@kuvaldolet 3 года назад

@@user-bg6zf9bv2w нет

@279okiap 3 года назад

@@user-bg6zf9bv2w в Питтсбурге ГАЗ-52?

@user-bg6zf9bv2w 3 года назад

@@279okiap ну похожи очень

@user-dn2tg2fj3i Год назад

no sé cuántas veces he visto éste trabajo, y aún me he imposible dejar de verlo!

@mikelafayette3421 3 года назад

I really admire the fact that you did this in your home shop but, wow, you caused yourself alot of work. And flip flops working in your shop...holy crap!

@redline3737 3 года назад

27:26 - Best Part

@bobl78 3 года назад

cleaning the carb in the kitchen sink...the moment you know , she really loves you

@partsandresto 3 года назад

No she, just me

@derp195 3 года назад

And here I am super impressed with myself for changing out my carb.

@partsandresto 3 года назад

Haha. You can do everything I did. I’m kinda dumb

@joshuaheath9003 3 года назад

Upgrade the 6 volt system to a 12 volt, use a gm one wire and voltage reducers where needed. That starter should take the 12 volts after a rebuild. It will make your life with that car much easier. Your flip flops would also make my dad proud, he used to weld in flip flops and get mad when he burned his toes.

@partsandresto 3 года назад

They are fabulous welding shoes, I can attest

@raybin6873 3 года назад

Not so sure of the way the valve lapping was done - using a drill spinning in one direction only. Should use a hand valve lapping tool having suction cups on ends - dab lapping compound on valve - spin back and forth - lift reset at different position - spin again - repeat until valve /seat are resurfaced. At least that's te way I was taught how lap valves /seats. (40 years experience). 👍

@partsandresto 3 года назад

Yup, understood. I definitely did it wrong

@frankdavidson9675 2 года назад

you are correct that is the way i did mine it worked fine dont need drill

@megadeuz6148 3 года назад

We had an old military welding machine that had a Chrysler flathead in it. That thing ran forever until one day we were using it and it made a very load bang out of the exhaust and never ran again. Now,this was many moons ago, so it's long gone by now.

@steventaylor181 3 года назад

Just found your videos the other day. Love the content and the humor. Restoration of an engine on anything is one of those daunting nightmares and probably the reason I've never taken on such a project or basketball for that matter.

@flatboat67 3 года назад

One of the best engine videos Ive seen. Getting it running with common sense and efficiency. Nice work!

@partsandresto 3 года назад

Wow thanks! Glad you liked it!

@hoost3056 3 года назад

Man, I would have dunked the whole lot into a hot vat of rust and grease remover and let it sit for a decade.....😂😂😂😂😂

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@wesleycopeland3857 3 года назад

After sitting neglected for decades, another Deacde of neglective maintenence soaking should get that baby to fire right up.

@ejtakach 3 года назад

Good to see you doing some work rather than the talking head we see too often. Just saying (;-)

@partsandresto 3 года назад

Hahahaha.

@audi80b3samodelkin5 3 года назад

👍👍👍👍

@bassmith448bassist5 3 года назад

Very cool to see the heat riser valve in the exhaust manifold move freely. Every Chrysler six I've ever seen has been siezed.

@partsandresto 3 года назад

Oh no kidding. I guess I got lucky

@robertlacob8831 11 месяцев назад

Love MOPARS! Great job back in the home garage!

@Sahkopekka200 3 года назад

The first 5 minutes of the video I in my mind i was just thinking about a power drill wire brush

@partsandresto 3 года назад

Could work, does work. Not on this one

@alejonin 3 года назад

Oh gawd. Never lap valves with a drill.

@euroberto85 3 года назад

Manliest ASMR anyone could ask for

@utah133 3 года назад

My first car was a '49 Dodge coupe. This engine was dependable but low powered! It was easy to work on and my first intro to DIY car care. I'd like to get another someday... The "EGR" system was especially simple. A little crankcase tailpipe!

@fordnut4914 3 года назад

When you use scotch tape with out taking it out the packaging thats gangsta.

@RoyZenzo 3 года назад

Eye of the tiger was one of the highest iq jokes

@partsandresto 3 года назад

That’s as smart as they come on here bub

@Scorpyon_kng Год назад

This was very satisfying to watch. Definitely motivated me to clean and rebuild the engine of a 56 Dodge Royal I’m getting this week. Thanks man

@donalddoty5768 3 года назад

A buddy of mine had one of these in his 51 Plymouth. he lost a rod bearing on number 5 cylinder so he just pulled the piston and sawed of the top of the rod and bolted it back on the crank. He drove on 5 cylinders for at least a year. It got smoother after 35 mph.

@partsandresto 3 года назад

Haha, brilliant!

@NORMOkPlay 3 года назад

Самый упоротый ремонт двигателя, последовательность ремонта отсутствует, цилиндры с раковинами, это что за типа хонинг дрелью сделанный, жаль двиган.

@gerdemon3331 3 года назад

Так это даже не ремонт, это "реставрация"! Ха-ха три раза. Если несчастный двигатель каким то чудом заведется после этого горе реставратора, то работать будет недолго.

@user-vr4tk8ug2m 3 года назад

а что реально можно так сделать хон руками или это мартышкин труд? мне летом предстоит капиталка и очень интересно узнать по этому поводу, бывают такие приспособы чтоб руками хон делать?

@kevindumais9610 3 года назад

Nice safety toe shoes you got there.

@partsandresto 3 года назад

Those aren’t safety shoes. Those are danger shoes

@specialized29er86 2 года назад

Love watching the rebuild, we going to do the same for our 33 Dodge. I'd be pressing in a new waterpump bearing and seal.

@raylarkin5004 3 года назад

That was an easy watch. My dad did the same on a few old flat heads (I'm 66). I was reciting tools procedures and all the part I could see like the spring retainers.and compressors., freeze plugs, ridge reamer and servicing the water pump, the carb, starter fuel pump (all of which were my parts. all this was 100% shadetree. Great memories I eagerly await part 2.

@partsandresto 3 года назад

Glad you enjoyed it brother, just blipped the starter for the first time and she works, so with some luck the video will be done by the end of this week!

@raylarkin5004 3 года назад

Thanks. You are a work from a different time an ethic. Now, it all goes to the machine shop to be tanked to enameled. I am one of your biggest fans

@georgechambless2719 3 года назад

12:25 The smartest thing in the video: you didn't do this on the kitchen table.

@partsandresto 3 года назад

Almost did tho!

@No_soup_for_you 3 года назад

Can I suggest you just buy a pressure washer... Edit: that was truly painful to watch.

@partsandresto 3 года назад

You can.

@partsandresto 3 года назад

Take an Advil, you’ll feel better. I feel fine

@No_soup_for_you 3 года назад

@@partsandresto lol. I not surprised.

@partsandresto 3 года назад

😘✌️

@santosmercado7621 3 года назад

Finish your project and enjoy it. Forget the critics. We do it the same way in Puerto Rico.

@steveu842 3 года назад

This video is epic. I did the exact same thing 3 months ago on a 52 B3B and I would have killed for a video like this for reference. Well done sir.

@partsandresto 3 года назад

Thanks brother!

@zeekwolfe5781 3 года назад

Rebuilding an engine wearing shower shoes?

@partsandresto 3 года назад

Correct. Except I don’t shower

@jimplatts6172 2 года назад

Superb nothing flashey just plain hard graft and determination.

@SchysCraftCo. 3 года назад

Good to hear and see you back on RU-vid. Hopefully ur projects are going well in these crazy times we live in. God bless keep up the great craftsmanship and hard work my friend. Can't wait to see ur next video. God bless

@partsandresto 3 года назад

Good to be back bud!

@robertsimmons1716 2 года назад

From one professional mechanic I can say you Sir are a professional!

@JDawghasaTruck 3 года назад

Wow! Never seen the scotch tape new gasket technique! Great idea!

@paulwells4203 3 года назад

Subscribed. Interesting topic, no painfully witty talking, time lapsed the boring parts, the 30 minutes went by quickly and the video was very interesting. I had a 53 Belvedere in high school and laughed when I saw the old style emergency brake which grabs the driveshaft and the Ball and Ball one barrel carb. Nice work. (Nice looking garage too)

@partsandresto 3 года назад

Thanks Paul, welcome! Next video out hopefully next week. Glad you enjoyed it!!

@steventroglin5380 2 года назад

A What I just saw was amazing ! Dude, that engine never stud a chance against You! It was going to get a old fashioned rebuild, and by God you were going to do it ! You ant fancy but you are going to " get her done " . BTW I learned a lot.