Resurrecting A Mopar 225 Dodge Slant Six - Engine Power S2, E2

Подписаться 1,6 млн

Просмотров 6 млн

50% 1

On this episode of Engine Power, the team resurrects and hot rods Mopar's indestructible 6 cylinder - the bulletproof 225 Dodge Slant Six.
00:00 - Intro
01:31 - Engine Teardown
06:09 - Slant Six Rebuild & Assembly
17:10 - Tune Up Tech
PARTS USED IN THIS EPISODE:
Accel: Ignition Tune-Up Kit, for use on Acura/Honda, 4-Cylinder, Kit
More Info: pntv.us/pn_pt_1391
Comp Cams: Cam/Lifters/Valvetrain, Mechanical Flat Tappet, Adv. Duration 264/264, Lift .440/.440, Mopar, 225, L6, Kit
More Info: pntv.us/pn_pt_1376-1
Edelbrock: Carburetor, Performer, 500 cfm, 4-Barrel, Square Bore, Manual Choke, Single Inlet, Silver, Each
More Info: pntv.us/pn_pt_1378
Edelbrock: Cylinder Head, E-CNC, Aluminum, Assembled, Bare, 64cc Chamber, 185cc Intake Runner, Chevy, Small Block, Each
More Info: pntv.us/pn_pt_1393-1
Federal-Mogul Corporation: Sealed Power Cast Piston, Flat, 3.440 in. Bore, 5/64 in., 5/64 in., 3/16 in. Ring Grooves, Mopar, L6, Each
More Info: pntv.us/pn_pt_1387
Federal-Mogul Corporation: FEL-PRO, Full Gasket Set
More Info: pntv.us/pn_pt_1380-1
Federal-Mogul Corporation: Sealed Power, Piston Rings, Cast Iron, 3.440 in. Bore, 5/64 in., 5/64 in., 3/16 in. Thickness, H6, L6, V6, Set
More Info: pntv.us/pn_pt_1388-1
Hooker Headers: Headers, Super Competition, 6-2, Steel, Painted, Dodge, Plymouth, 198, 225, L6, Pair
More Info: pntv.us/pn_pt_1381-1
King Engine Bearings: Rod Bearings, .020 in Undersize, Bi Metal, Alecular Alloy, Set of 6
More Info: pntv.us/pn_pt_1386-1
Loctite: Heavy Duty Anti-Seize
More Info: pntv.us/pn_pt_1370
Loctite: Threadlocker, 271, Heavy-Duty, Red, 36 ml, Each
More Info: pntv.us/pn_pt_1373
Melling: Oil Pump, Standard-Volume, Chrysler, Dodge, Plymouth, 170/198/225, Each
More Info: pntv.us/pn_pt_1385-1
Offenhauser: Intake Manifold, Single Plane, Aluminum, Natural, Square Bore, 4-Barrel, Chrysler, 170, 225, Slant Six, Each
More Info: pntv.us/pn_pt_1377-1
Pertronix: Distributor Conversion, Ignitor II, 12V, Kit
More Info: pntv.us/pn_pt_1383-1
Pioneer: Harmonic Balancer, Internal Balance, 6.99 in. Diameter, Nodular Iron, Black, Chrysler, Dodge, Plymouth, 225
More Info: pntv.us/pn_pt_1379-1
Royal Purple: Assembly Lube, Max-Tuff, Synthetic, 8 oz., Each
More Info: pntv.us/pn_pt_1372
Spectre Performance: Valve Cover, Stock Height, Steel, Chrome, Plain, Chrysler, 170/198/225, Each
More Info: pntv.us/pn_pt_1384-1
Summit Racing: CARDONE, Water Pump, Replacement, Each
More Info: pntv.us/pn_pt_1382-1
Fast Fish Auto Parts: Big block Mopar rear main seal. Application: 383,400,440,426 Hemi
Goodson Shop Supplies: High Performance Valve Spring Compressor, Pneumatic
Loctite: Loctite 37555 - Hi-Tack Gasket Sealant
Matco Tools: MST4531 - Harmonic Balancer Puller/Installer
Matco Tools: MT24 - Dual Laser Infrared Thermometer
The Industrial Depot: The Industrial Depot - Fasteners, Hardware and Shop Supplies
WD-40: WD-40 Trigger Pro, 20 OZ Non-Aerosol

Авто/Мото

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,7 тыс.

@PowerNationTV 4 года назад

We'll continue to post these episodes here on RU-vid. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/engine-power

@79tazman 4 года назад

Awesome!!! I love the Slant 6 the best engine ever!!!

@nickfoy5413 4 года назад

PowerNation you guys should build a true ford 400 "big block"

@basshead. 4 года назад

+79tazman The 2JZ is the best Inline 6 engine. LSx is the best V8 engine in the world.

@cindysue5474 4 года назад

@@basshead. STFU 2 different engines with 2 different purposes.

@basshead. 4 года назад

+Cindy Sue They both are petrol Inline 6 engines.

@MrJeffcoley1 4 года назад

The engine from the junkyard was perfect, you just had to replace the block and all the internals.

@jlo13800 4 года назад

What was your premix ratio? you cannot ru these without oil injected into the intake, Duh

@CB-xr1eg 4 года назад

@John Christensen New handle and head, so how is that original?

@linemanlovesyou859 4 года назад

Clive Bindley that’s the joke buddy

@CB-xr1eg 4 года назад

@@linemanlovesyou859 How is it a joke? If the handle and head have been replaced then it's not original. Some people are just dumb.

@jlo13800 4 года назад

Just premix and run xd-100 that what i would do, the 225 is some type of valved fucked up 2 stroke anyways

@TofuInc 4 года назад

Should be called "How to tear down a Slant six, throw it away and build a new one from scratch."

@boardernut 4 года назад

I'm cracking out , god I thought the same

@tomheckhaus7617 4 года назад

You summed that up very well.

@charleswesley9907 4 года назад

I had 4 of them and they were not a good engine . 100000 miles and they were junk . Newer engines are tremendously better .

@sleeplessvirus 4 года назад

Charles Wesley also putting the carb over the Iraq exhaust manifold doesn’t seem right

@charleswesley9907 4 года назад

@@sleeplessvirus The metal used in them wouldnt make good slag .

@toasterbathboi6298 4 года назад

1. Disassemble engine 2. Throw out the disassembled engine 3. Buy a new engine (not assembled) 4. Assemble new engine 5. “We rebuilt an engine”

@johnbingham8508 2 года назад

I was about to comment the same thing. They didnt restore the original engine

@johnhalter7287 2 года назад

Yes many different oil pans, I put another 225 in a duster with the 198 and turning took a whole parking lot until I got a better match.

@jonsworld5307 2 года назад

old engine was good shop just didnt want to do work iv rebuilt them with 3 times the rust

@tomreyn3610 2 года назад

Dropping contributors names the whole time. * every other new part mention. They bought this as junk, got what they bought. Shoulda started with a runner. This channel is the best, if you are working w an unlimited budget. - I could do this. …… With contributions from; Duplicolor, Summit, Comp Cams, Royal Purple, Sealed Power, Loctite, Felpro, King, Pioneer, ARP, Melling, Hooker, Edelbrock, …..,. And their “magic”.

@DorianMariusGray Год назад

I hate that they do this on all of these shows. Love how they try to make this relatable to the guy in his own garage but do everything the exact opposite of what the guy in the garage can do.

@Lead_Bacon 3 года назад

If anyone wants some more knowledge on the Chrysler Slant 6, just look up Uncle Tony’s Garage, that man seems to know everything about it

@The_R-n-I_Guy Год назад

Best channel ever!

@theghost6412 Год назад

if you want to see what these engines are capable of, look at aussie engine builders. american engine builders are far too tame in comparison and never ever get adventurous.

@RandyCouch-zm3lv 2 месяца назад

3 e⁴3 we w5 see AR GA zee@@theghost6412

@davidkaye8712 4 года назад

We bought this engine for $150 threw it away, then spent $3000 building a new one and called it the old one.

@ixlr8677 3 года назад

10 4

@justsaiyansteve 3 года назад

Lmao! Shiit

@markmergatroid2348 3 года назад

So true Mr.Kaye, so true.

@rogerodle8750 3 года назад

You're not supposed to say that -- but yeah.

@devilsatan2973 2 года назад

@@markmergatroid2348 Yep. And I bet that chrome valve cover adds 50hp!

@tripoloski3226 4 года назад

I resurrected my old run down Honda civic by just buying a new one. Complete car revival.

@scottwales5966 4 года назад

Lol i seen you on other vids

@tripoloski3226 4 года назад

Scott Wales yeah man, working on my comments. Just want to give people a good laugh.

@JenGM24 4 года назад

😒😒

@Ssgt2012 4 года назад

Wow, why don't u become a mechanic? Just telling people to buy a new one.

@sovietsymp803 4 года назад

Alex.B Choi He/She was making a joke. The joke is about how the video replaced every part from the original engine. (100% sure about the explanation feel free to correct me.)

@FrankAndTinaOfficial 4 года назад

My dad owned a parts store I grew up in and we had a Black man named Mr Reynolds that had a 225. I'll never forget he came in and asked " Give me a breaker box and a rooster head for a duce and a quarter". He wanted a distributor cap and a rotor button for a 225!

@wyman36 4 года назад

Love this engine! My dad's '72 Dodge Charger had one, as well as my stepmom's '73 Dodge Dart Sport, and the '76 Dodge Dart sedan they both owned. Good engine.

@tomheckhaus7617 4 года назад

I agree with the comments below, this is about building an engine not re-building an engine. Another amazing item is how all the valves fit miraculously without any lapping to insure a good seal. I guess that was another unimportant procedure not worth showing.

@theghost6412 Год назад

This wasnt much of an engine either, they only slapped it together roughly, by the end of it the engine was a lemon. They didnt even get it to be as powerful as a stock standard engines horsepower. It had far less than a stock standard engine. I was hoping for 160 to 180 horsepower atleast for all the work they supposedly did.

@mikeb46 4 года назад

I had a 1964 Plymouth Valiant with the 225 engine. We had some horribly cold winters in Wisconsin back in the 70's. It was -10F for the high during the day for about two weeks. We started work at 6am so the cars were in the parking lot when the sun was barely up. It was probably -20 until about 10am. I think it was in January. After work, My little slant six always fired right up. After a couple minutes to warm up I would drive around the parking lot to see how many cars did not start. Some days there were a lot of them, all newer than my Valiant too. But those were the days of carburetors on big bore V-8's so they were at a disadvantage. I bought a huge battery for the Valiant from a farm implement dealer. It was a beast. So the guys got used to seeing the Valiant coming and they knew they were going to get a start. She made quite a reputation for reliability that year. It was a neat car as Valiants go. It was two door hardtop with bucket seats and four speed trans. The first and second gears were fairly low so it was actually pretty quick up to about 45 mph. I had made marks on the distributor so I could advance the timing by eye when I was able to get high octane fuel for it. 103 really did make a difference IF I advanced the timing. With a heavy duty clutch from the pickup line it would squawk the tires even in third gear with a power shift. It embarrassed some so called hot cars at the stop lights when they underestimated the little Valiant. It had a two barrel carb from the 273 engine and a 355 rear axle,

@socksumi 4 года назад

Ironic that later Valiants from around 1976 were horrible in wet and winter weather because of notoriously bad electricals.

@sparkywirenut 4 года назад

I had a 64 Polara with the big block 318 , I live in the U.P. of Michigan on lake superior , back in 1970-71 we had a cold snap of -35 for three days , my car was one of the few in the parking lot that would start up good , worst starters we GM's with V8's , those gear reduction starters on mopars may have sounded funny but they worked !

@fordinlinestraight 4 года назад

I read and enjoyed your little story. The good ol days cold winters and carbs

@mikeb46 4 года назад

@@sparkywirenut That's great! I suspect it had something to do with the intake manifold on that engine. I remember those well. I had one in a 57 Plymouth and they used them the first part of 1965 in the Plymouth Fury and Dodge Polara at the Belvidere plant where I worked shortly after graduating high school. For only 318 cubes that engine looked BIG. They went to the small block 318 to make more room under the hood. Chrysler wanted a V-8 to fit in the Valiant and Dart.

@cargo4441 4 года назад

I FOUND out the autolite 2 barrel carb from fomoco where the best carb for the slant six.

@vipindev1132 3 года назад

U guys are actually adding value to things and doing that in style. Keep up the good work.👍🏽

@doranvee5944 3 года назад

One of the finest engines ever produced.

@scuderiaferrari502 6 месяцев назад

Lmfao, not really.

@KubanKevin Месяц назад

@@scuderiaferrari502 actually he is correct. These engines were literal tanks Tough to kill and extremely easy to work on

@myfagan 4 года назад

Thank God... something other than small block chevy or ford.... thank you!

@Beer-can_full_of_toes 4 года назад

It is such a good feeling having that clean oil all over your hands when putting together a fresh engine. I miss having the money to grab a cool old motor just to tear it down and rebuild.

@harrytazzia4133 2 года назад

The pride of Huber Ave. foundry! Iron block and head same birth place.

@deplorablecovfefe9489 2 года назад

Had a 4 door 67 dodge dart w/225 all through high school. The thing was a slow iron tank. Survived the blizzard of "78" with that thing and snow tires. I put the fold down "rambler" seats in it and made it into the "love machine"

@deanguando1335 4 года назад

What a great engine. Those engines always got reused if the vehicle wore out or got totaled. Extremely reliable - easy to maintain - easy to fix. Like everything else today - we have gone backwards.

@darthbuster 2 года назад

Yup. Crap now is built to fail so you will buy new crap that is meant to fail.

@johnparrish9215 4 года назад

My brother had an old Barracuda that cam with a slant 6 and 4 speed trans. His build was similar to this except he put a little T3 turbo on it. Man, what a torque monster it turned out to be. Fun Ride.

@Lstwhknight 4 года назад

Solid old engines. I have even seen them come in with a cylinder blown out and still running. After boring it out and installing a sleeve it was rebuilt to continue on for many more years. Well designed engine.

@RANDOMNATION907 3 года назад

I am _really_ enjoying all these straight six builds.

@daled5363 4 года назад

Slant Sixes are definitely indestructible! I drove my 1963 Valiant with a 198ci slant six for at least a year and a half with cracked block. You could even see the water seeping out the crack just below the exhaust manifold. Once the engine warmed up the crack would close up. I would always carry a couple extra gallons of water in car for that reason. After starting the engine I would fill the radiator up with water. I drove that to work everyday and wherever else I had to go. The engine never over heated. I love the car because it also has a manual transmission, "3 on the tree". The rear end was lot louder the engine is. Slant Six "THE LITTLE ENGINE THAT COULD !

@obviouslytwo4u 4 года назад

title should be called, rebuilding an old engine by using none of the old parts

@ducatista695 4 года назад

I think they reused the head. ;-)

@Ducky836 4 года назад

Yeah, but it's still satisfying.

@packingten 4 года назад

Yes we all had dynos,unlimited snap on&matco tools,parts washers,dial indicators...brand new everything,My parts washer when I started?, Yes a Buick hubcap,with gas...

@kevinroberts8441 4 года назад

and spending a shit ton of money

@wraith0127 4 года назад

And how to cram as many product placements and ads in a single video as possible.

@LucioUrtubia581 2 года назад

What a nice, smooth and reliable engine. Love that olds slant six.

@andrewdavis6012 4 года назад

cruizing at 90 mph in my Valiant Regal back when we had an unlimited speed limit here in Darwin NT... loved it

@Gantzz321 4 года назад

The slant 6 in my books is the toughest engine ever produced. I have a 74 Dart that I ran for years, one summer I blew a seal and ran it dry of oil 4 times before I fixed it. Each time the engine seized up, I would just add oil, take a wrench and turn the engine over. Then start it up with no issues. She ran for 6 more years after that with no issues till I sold her. Ran into the owner an about 5 years later around 93, and he told me it was still running.

@taterlysaladman9377 4 года назад

I could say the same thing about the Briggs and Stratton that cuts my grass. I think I get stuck behind you every time I try to drive somewhere in a hurry.

@Gantzz321 4 года назад

@@taterlysaladman9377 you really don't know anything about what is being talked about here do you?

@ryotaryuu 4 года назад

That massive forged crank had a crack? Damn, must have had a million miles on it.

@chrisj197438 4 года назад

Captain 345 Probably froze and cracked from sitting

@prevost8686 4 года назад

They didn’t use x-ray & sonic testing on forged and casted parts then. QC is far better today than back then. That’s not to take anything away from the Slant 6. It was an extremely durable design for that time period.Way back in my high school days, me and my best friend did our best to tear one up . We kept oil & water in it but absolutely thrashed it. We failed to kill it.

@ThePaulv12 4 года назад

@@prevost8686 'Extremely' durable it is not. Average durable it is. I know. I fixed the effing things for years and they are about equal to any other inline 6 made by the big 3 of the era. They don't like being thrashed. They die. no.6 big end lets go and ventilates the block and smashes the starter off. I have seen at least a dozen do that. The big end bearing rotates, the oil hole blocks off, the big end gets hot, the rod bolt fails and bang bang bang grrr, grrr cough grrr clank clank clang - tissss, shhhhhhhhh .......... ......... ........

@daveycrocket6277 4 года назад

Captain 345 I think the machine shop wanted the block and crank probably told them that if they gave them the block and crank they wouldn't be charged for work

@VIPK9 4 года назад

@@daveycrocket6277 Something similar happened with me I sent my block and head to another shop for CNC port work they told me block/head was clean after doing a magnaflux testing that other shop was trying to scam me

@bobbydartonhricko4068 3 года назад

Love the tv show. I missed the straight 6 build with the turbo installed. The black hurse was the coolest. Mail jeep rebuilt is cool too. Keep em coming. Wavin from Watkins Glen new york.

@timmotel5804 Год назад

Beautiful work and description of each step in the build. Thank You

@jmurphy1973 4 года назад

I'm not a Mopar guy but its damn hard to argue against the ol' Slant 6.

@79tazman 4 года назад

Slant 6 is the best it will outrun anything Uncle Tony has a 170 has a 170 with over a million miles has been running since 1964 and never played with and if you don't know who Uncle Tony is just look up Uncle Tony's Garage here on RU-vid

@chrishuber8930 4 года назад

@@LordHumungusFL won't outlast a slant six

@painterboy454 4 года назад

In 1982 at Indianapolis Raceway Park, I saw a guy with race built slant 6 in a rail car run mid 8's at 156 mph.

@Brock_Landers 4 года назад

@@LordHumungusFL The 300 was an awesome engine and made alot of torque for a straight six, they're both good engines in my opinion, and both very smooth running.

@frigglebiscuit7484 4 года назад

@@LordHumungusFL 300s were fuel hogs from hell. just get a 302.

@kurtw176 4 года назад

I have a slant six in my 68 Ramcharger with a 4 speed manual. Great combo for off road.

@euclideszoto997 4 года назад

I'm just grateful that you can still do this in this day and time.

@sourkraut6248 4 года назад

I had a Dodge Dart my Dad helped me buy in my teens Later I owned a Dodge van. Both with this fantastic engine. Later while working as a mechanic I encountered the engine on a myriad of industrial and agricultural products. I know a fellow who installed a Franz bypass oil filter on his and he had over 300 k on it and it was still a daily driver. This is a rare instance where planned obsolescence slipped past the monsters of greed and deception. Thanks for reminding of my long lost love.......... and all the great memories it helped create in my life.

@epeon7 4 года назад

I used to make these at Chrylser Trenton engine plant. One reason why it was such a good engine was that it could only be made one way and it was hard to mess it up

@spaceghost8995 2 года назад

That makes no sense.

@robertmichelin7352 Год назад

I worked at Trenton engine myself, as an electrician, from 91 through 05. I haven't worked with a more knowledgeable supervisor, Stan Marchewka, or smarter coworkers since. Great place to learn, very hands on place.

@macelius 4 года назад

Enjoyed the video, found this funny; ARP fasteners on timing cover and oil pan, later "no need for high dollar fasteners" for the head...

@jdavis6618 2 года назад

So happy somebody else found this funny

@albertmcfry6322 Год назад

I had a slant 6 in a 71 dodge demon. Awesome engine,put 185000 on it and was still running good when sold. The engines were really good motors!

@jerryvinson5840 4 года назад

I'm looking forward to seeing where this goes. I love challengers!!!

@RobertMSmith1 4 года назад

Those slant 6 engines are are like country music , they are here to stay . I had a 72 Plymouth with 300k and never did anything but oil/filter change and 1 rebuild of the 1 bbl carb , A semi ran over it and that was the end of her

@taterlysaladman9377 4 года назад

Yet here you are, aren't we lucky?

@scottrussell8139 4 года назад

1 of the best all time in line 6s ever made

@danielrowe2174 4 года назад

Agreed. It's ashamed that had get rid of an engine that was dependable and reliable.

@scottrussell8139 4 года назад

@@danielrowe2174 i had 1 YEARS AND YEARS ago,,,,LOL,, had way over 200000 miles in a 66 dodge dart wagon and was never torn apart excpet for maintenance,,,, sure it leaked some oil but wasnt bad,,,, sounded like a singer sewing machine but it was very dependable and still had all kinds of power for what it was,,,, it NEVER ailed me or left me stranded,,,,, all i did was oil changes and tune ups,,,,your 100% right,, the body gave up and was almost all bondo but the engine and trans was strong,,, that car didnt even have power steeering,,,, i was plling into my drive 1 day in the mid 70s and a van hit me in the rear,, pushed the back bumper to the rear diff,,,,,, it was a blast to drive,, i miss that car

@snookmania1062 3 года назад

Thanks for posting the video @POWERNATION it really helpful for bring my slant six 225 back , went over everything I needed to know !

@donnyhud 2 года назад

best engine ever created!! i owned a few slant 6 darts back in the early 90s, man,, i miss them!

@dielauwen 4 года назад

The 198 was all forged and had an over square design. It was superior.The 225 does not rev being undersquare. This engine weighs a ton and so does the crank. Getting at the distributor was always a real pain. TO remove rusted in pistons pour Vinegar in the cylinders and wait a few days. Then just a few smacks and out they come. Your method is Brutal.

@Acarson87 4 года назад

Getting at the distributor was a pain? Was easy as heck for me on my dart

@jessewilliamson82 4 года назад

225 was the least of the 3 as you said.

@ImTheJoker4u 4 года назад

My old man had a 1980 D-150 with this engine. IIRC, he put like 250k on the clock (which at the time was so unheard-of the local paper interviewed him about it) before he sold it.

@gerardosalazar161 3 года назад

Basically the same technology from over 120 years ago; while I was watching this extremely educational video I could not but compare the complexity of one of these engines compared to an electric car. As today nobody would buy an old propeller airliner with the huge radial engines very soon fewer and fewer people will buy new technology until one day internal combustion will be relegated to museums. By the way, I have a beautiful Rolls Silver Shadow from 1968 that was a gift from my dad upon graduation. Big engine that I love and that I plan to keep forever. I guess soon it will need to have a serious overhaul and I will be there to take as many photos as I can. Great job guys, I loved the video.

@tdibell 4 года назад

I had a 1975 Plymouth Duster. It had a 225 slant 6 in it with a “3 on the tree” transmission. On a cross-country trip we actually got 41 mpg!!!! Great engine, great car!!!

@partsisparts9568 Год назад

Call mythbusters!

@jagsfanrick 4 года назад

Love the upgrades you did on that legend of an engine.

@Canuckrz 4 года назад

"Theres no need for high dollar fasteners to retain the cylinder head" Meanwhile uses ARP hardware for the oil pan and timing cover bolts...

@Ahnenerbe1944 4 года назад

Canuckrz thought that same thing. Head gaskets/ studs aren’t something you want to cheap out on

@Canuckrz 4 года назад

@@Ahnenerbe1944 To be fair, if they're not torque to yield bolts and its a fairly low stress engine its fine to reuse them assuming they haven't been corroded from sitting. I just thought that line was a bit rich considering all the things they made sure to name drop using expensive ARP hardware for.

@skylinefever 4 года назад

I don't know why they used ARP parts in some places but not others. Since this build isn't extreme, and the head gasket isn't failure prone, it might not benefit from ARP fasteners. Engines with inadequate fasteners from the factory, such as the Ford 6.0 PSD are an example where you absolutely want to ARP studs. Also, sometimes when you add forced induction to an NA engine, or you dramatically increase boost in a factory forced induction engine, ARP studs are worth it.

@chrisj197438 4 года назад

Canuckrz It’s advertising for ARP

@stever.7008 4 года назад

"A clean deck surface on the block and heads promotes a good valve seal between them and the head gasket." What does the head gasket have to do with the valves? lol, it would appear that "Power Nation" could use a knowledgeable editor/staff.

@apismellifera1000 2 года назад

I love seeing six cylinder engines getting hopped up. I love it when they are given EFI and best yet a TURBO!!!

@Krunch7zero 2 года назад

I had the slant 6 in a 81 Dodge Mirada way back in 87, awesome car and engine!

@tonytrotta9322 4 года назад

Nice Video! I have a 1980 Dodge D-150 truck with the orig, 225 slant six with stick shift with about 90,000 orig. miles - my dad bought new for about $6500. Starts right up and runs great.

@michaelferik8060 4 года назад

Just imagine. No computer modules to reset or sensors monitoring anything and everything. Easy access to plugs, wires, engine accessories, oil filter. A mere mortal can perform nearly all their own maintenance on the engine. Dare I say I miss those "good old days'?

@garrettkessler1895 4 года назад

Amen brother!!!

@skylinefever 4 года назад

If cars didn't have to pass smog tests, there might not have been such a pressing need to replace the slant 6.

@richardcline1337 4 года назад

It would have been great to let Mexifornia have the newer trash engines with their computer headaches and let the rest of the country keep running the sleepy sixes.

@youcanbesmartaskhow3857 4 года назад

Its tempting but dont be a Luddite. Remember 12 mpg and carbon monoxide headaches? Tuneups of spark plugs, wires, cap and rotor button [check points and dwell] with valve adjustments (and new cover gasket) every couple years? Yeah, The old days sound great. Even new shitboxes go 120k without any of this. And usually with no oil/coolant leaks .Stand in line for gas much??

@drjimjam1112 3 года назад

Sometimes when you send the block or crank out to the machine shop they come back and say sorry it’s no good. Thank you for not lying about it and pretending it came back just fine. Actually there’s quite a bit more that can be done to this engine and they run surprisingly well.

@joeyoung4309 Год назад

After working on my own cars, all 92 and newer and mostly imports, its fun to watch these videos of "old school" engines because everything seems just so simple and easy to work on. I need to get a classic car of some kind to mess with one day.

@rayjones95 Год назад

Build a short bed with a slightly modified slant 6. Small tranny, small driveshaft, small rear end makes for a quick little truck

@davidnicolas8019 4 года назад

"we replaced it" welp that's one way to resurrect it lmao. "It's like brand new!"

@banno6938 4 года назад

I've disassembled many " high value " core engines that were severely rusted up & never used an air hammer to force the pistons out . & I had most of them spinning over within an hour once down to the short block . But then , I'm not an idiot !

@jonutley5357 2 года назад

guess they never heard of rust penetrant :D

@jeffstone7912 Год назад

The Beauty of an in-line six engine is its longevity and reliability. My first vehicle was a 1969 dodge D 100 stepside. It was easy to work on. Parts were cheap.

@ericmcginnis9413 3 года назад

These slant 6'S can sometimes work somewhat backwards when trying to hop them up! What I mean is that these engines were designed to produce power at a certain rpm range and trying to change that can sometimes spit in your face! One of the few engines that don't always respond to hopped up parts! Uncle Tony did a great vidio explaining what I'm trying to convey! He has a vast knowledge when it comes to mopar's! If rebuilding one I would refer to his knowledge & know how! Also if I remember correctly, the exhaust on these worked somewhat like a two stroke in the sense that it sent a pulse that the engine needed! My knowledge is minimal but I do know that sometimes the factory knew what they were doing!

@leedaniels6611 4 года назад

Thank you PowerNation for doing this build! I had a '74 dart with a slant 6 from 1988 to 1991 to get me thru school. Ran great and always started, except for when the air temps got below zero. Then I would cross my fingers and hope it would start! Ran it until the frame broke in half on the freeway entrance. I junked it then. :( Again, thanks for this video!

@johnmaki3046 Год назад

Expect for "great unibody construction", these cars would HAVE KICKED ASS forever!

@johnmaki3046 Год назад

These were GREAT "kick-ass" American cars! They had style , (GOOD) handling, POWER, and FUN! IF the body/frame construction had been up to (OLD TIME) Chrysler standards, these would have been LEGANDARY.!

@johnhenke6475 4 года назад

The slant six was one of the best engines Mopar ever made.

@johnsaccoccio7373 4 года назад

But why than that plastic distributor shaft gear.?

@rarejer 4 года назад

Your work blows me away. Supercool!

@Batman-wv5ng 3 года назад

I had this engine in my car (Valiant) one of the best engine ever made so reliable and smooth .

@Gabriel2.0 4 года назад

nothing left from the old engine... how is this resurrecting?

@juannacha 4 года назад

I was just thinking the same thing

@marceloho1984 4 года назад

Well... This is how we rebuild engines.

@I_Crit_My_Pants 4 года назад

@@user-mj7gm6gj9v If nothing original is left over then it's not even the same engine anymore, you can't call that "ressurecting"... That's called REPLACING. Sit.

@I_Crit_My_Pants 4 года назад

@@marceloho1984 Also not "rebuilding" if nothing original remains, called REPLACING.

@wlan246 4 года назад

This is my grandfather's axe. It's had its handle replaced three times, and its head replaced twice...

@jeremy7991 3 года назад

SO MUCH FOR YOUR TRUST BEARING WHEN YOU HAMMER IT IN

@nathanwilson3185 3 года назад

These videos are always incredible quality and so thought out

@car-man 4 года назад

I'm enjoying watching your good video. I support you in Korea.

@delilahrosesmith4871 4 года назад

I had one in my 65 Barracuda good motor..mine had 2 ...2 barrel cabs mounted on the intake

@williespoonemore3392 2 года назад

Old school , a gotta love them old straight 6s . I had 3 or 4 a the bullet proof little sucker . Had a A-100 with high walk in topper oh it was the sweetest !

@BlasphemousBill2023 5 месяцев назад

In high school I had a 1960 Dodge Dart with the 225 Slant 6. That car was 25 years old when I got it although it had a very kind life. I never had a bit of trouble with the engine (brakes sucked). I did change the water pump out it was wobbly but still wasn’t leaking:) A nice steady power plant very easy on gas and enough speed to get on a highway:) Great engine!

@edwardpate6128 4 года назад

They were an awesome and bullet proof engine!

@arturohernandezjr5164 4 года назад

I was under the impression the engine was going to get refurbished, not completely replaced with all new parts.

@arturohernandezjr5164 3 года назад

@Dave Micolichek yes, but you also at least try and reuse most of the old parts. Not just completely get rid of everything internal and external and only use the engine block, in that case just Buy a brand NEW Engine. NOT everyone has the money to just straight up replace everything in an engine... we are not all made of MONEY...

@kevinthorrington2131 2 года назад

My best friend in high school had an old dodge truck with a 225. We rebuilt it in our junior year and that engine ran so smooth we couldn’t feel it run. Those 225’s didn’t have a lot of HP but they were a nice running engine.

@albany222 4 года назад

'64 Dart GT bought an aluminum intake off one of the mechanics that I worked with, put the 4 barrel on it and for a slant 6 it was awesome. Now I just drive the '13 Dart Limited, 1.4 turbo, leather interior, heated seats and steering wheel. My how time changes things.

@Northern_Farmer 4 года назад

We have 2 slant 6s in our swathers. They are the 225 industrial Engines...Great Engines !!!

@UncleBubbles94 4 года назад

Did not expect to see your name pop up on this video's comment section. You and south sask run great channels

@Northern_Farmer 4 года назад

@@UncleBubbles94 I like to watch these kinds of videos

@Northern_Farmer 4 года назад

@@UncleBubbles94 and thanks

@bonestockgarage122 4 года назад

Have one in my D100, good pulling engine and reliable.

@multimood Год назад

I had the 225 in my 74 Scamp, 75 Duster and 80 Le Baron. Greatest engine ever created!

@johnmaki3046 Год назад

The "Super Six" was THE "Kick-Ass" small motor! I have driven MANY cars (stock) in my days, but have NEVER RESPECTED "stock" 6 cylinder power SO MUCH! This was THE (cheap) KICK-ASS "6 cylinder"! A GROUND RIPPER!

@danielbustamante9682 4 года назад

"Leaning tower of power " I love it.

@BIGSNAKE16 4 года назад

Man, you can't beat a slant six. I had a 225 in a 1964 Dodge flatbed PU that I hauled firewood in. I drove it for over a year with a rod knocking. It gave out one day when I had to stop on a hill and it just couldn't get going with the heavy load and top the hill once the traffic cleared. It threw the rod and I just let it roll back into the shop driveway.

@taterlysaladman9377 4 года назад

You can't beat a 6 cylinder Chevy. You can't beat a 4 cyl. Honda. When you put a tiny engine into a car, it seems to last forever. Oh, so why do we put big engines in them? Because given the choice, most folks want the power!

@taterlysaladman9377 4 года назад

@Joe Home that's racist.

@jamesmckay9966 2 года назад

When i worked for the U S Forest Service we had many Pick ups with The slant 6 engine. We NEVER had a problem wirh any of them.

@lawnmowerdude 4 года назад

I always get bummed out when the engine they start the rebuild with isn’t the one they finish with.

@chuckschillingvideos 4 года назад

Well, that happens in the real world. Junkyard engines are always a gamble.

@Dunki113 4 года назад

@@chuckschillingvideos it depends on where they're from sometimes and how old they are, for example, if I'm looking for a Toyota 1uz-fe V8 engine (I don't care if people hate it since it's a Toyota) for a project car i can get one out of a car that looks mint but it could be in worse condition than one from a wrecked car (unless the car was wrecked head on there's always a chance it could be salvaged) because sometimes cars end up in the junkyard because the previous owner want a quick buck or for some reason the car just wouldn't run and they gave up on it, you will never know until you take it apart and rebuild it and look it over as you rebuild it while replacing parts here and there along the way just to be safe (like rings, sleeves, gaskets, etc.) And see if the block is still worth investing in once you get everything out

@MrJeffcoley1 4 года назад

It’s like one of those “first starred in years“ videos where they just take the entire car and rebuild it from the frame up with a brand new engine.

@MrJeffcoley1 4 года назад

chuckschilling yes, but what they did was buy a junkyard engine, tear it down, then throw the entire thing away and buy a bunch of new parts. They could’ve completely left off the first part of the video. The only thing that would have made it worse is if they just decided to build a V-8 instead

@shawnhammack8479 4 года назад

I had a 79 Chrysler lebaron that had one of these in it. That thing ran forever.

@JeepredruM 4 года назад

had an 81 same deal, wrecked the car 4 times, engine kept going sold it with 230k it went to mexico, probably still running

@tstahler5420 3 года назад

I got my 1st DL in a '67 Dart with a 273 slant 6, that thing was incredibly quick.

@JJ-sv9kh 2 года назад

225 slant six, absolutely a beautiful engine.

@austinblevins6804 4 года назад

I'd call it the leaning tower of fuel efficiency

@ellenorbjornsdottir1166 4 года назад

Leaning tower of easy driving

@glennchartrand5411 3 года назад

For those of you wondering "why did they lean it to one side?" It was designed to be a replacement for the old flat head six cylinder industrial engine. The only way they could get the much taller OHV engine to fit in the same engine compartments was to lay it over on its side. (They didnt want their industrial and commercial equipment customers to have to do major redesigns to fit in a modern engine) The off set water pump is so the fan would be in the same location. The only design change industrial equipment manufacturers had to do was deal with the exhaust flange being on the other side of the engine....other than that, they pretty much dropped into whatever the flat head six had been in. So the rumors of "they were going to make a V-12" ,"They wanted lower hood lines on their cars" and "Laying on its side compensated for torque wearing out the cylinders unevenly" is just urban legends. The indistrial engine had good overall performance so they started putting them into cars.

@glennchartrand5411 3 года назад

@Dave Micolichek No , the engine first appeared in the mid 50's as an industrial engine to replace the IM-6 flat head in Yale Forklifts ,they didnt even put it in automobiles originally. That this engine was in Yale forklifts a good five years before the first car had one , kind of blows your claim about hood lines right out of the water.

@glennchartrand5411 3 года назад

@Dave Micolichek You're trying to bullshit a forklift mechanic about when slant sixes first showed up in Yale forklifts. I'm not going to argue with you about it.

@JohnSmith-of8um 4 года назад

had one in my 65 dodge power wagon. rebuilt motor and 3 speed trans.for 1300. used to take it to our camp. 120 miles. would hold it to the floor all the way there and back. motor never failed. wish i could of seen this video.few more horse was needed

@MrPropanePete 4 года назад

These were great engines, you couldn't hurt them. We used to have them here in Australia in our Chrysler Valiant series of cars in the 60's and 70's. Matched up to a Torqueflite 3 speed auto they would run faultlessly for years and years with just oil and filter changes and a set of plugs and points about every 90 years... I had two Valiants with these motors, should have kept them. Would love to have one now as my daily drive.

@tesicnr 4 года назад

How to resurrect an engine: 1) Clean the engine 2) Give up and use another engine 3) .... 4) Profit?

@blademaster2701 3 года назад

um you know you can’t reuse a badly damage block

@brandonpurple8938 2 года назад

@@blademaster2701 it still could of been bored out looking it over

@maxymoo2764 4 года назад

Should be called "Buying a perfectly fine 225 Dodge Slant Six"

@springplus300 4 года назад

Buying a junked 225 Dodge Slant Six - then buying a perfectly fine one in parts...

@conservativethought1460 4 года назад

Never seen one go bad ….that's why they found this one at the junkyard. The guy had it for sale for 40 years !

@georgiaguardian4696 4 года назад

I don’t understand everything you explain as you build it, but the explanation makes this video really great!

@TobyStahler-yp9ll 10 месяцев назад

In 1982, got my DL in a '67 Dart with a 273 slant 6. That thing was bizarrely fast.

@jimensign2514 4 года назад

The 225 was a solid, dependable engine. I had one in a Valiant.

@tdw5933 Год назад

Never Die!

@banjohappy Год назад

Another trait, uncomplicated.

@deadriseful 4 года назад

This is super cool! You all should do a Ford 300 straight 6.

@fortj3 4 года назад

They did. A little over 200 HP and 300 Ft Lbs of torque. it sounds pretty mean.

@psyolent. 4 года назад

what a beautiful build. thanks for sharing :)

@davidstumer3360 Год назад

These engines are amazing. I guarantee when the world ends. They will still be a slant 6 running. Always cool when you pull the pistons ridge on the cylinder is on one side. 😊

@bjr2379 4 года назад

I would have filled the cylinders with oil and let them sit overnight before beating on the rods with anything.

@1spaghetti32 4 года назад

Rob B They could’ve used some WD-40 or something. That hurt to watch. Maybe they knew the the block was trashed before disassembly. Looks like they paid $150 for a cylinder head with all the parts they replaced.

@davekauffman8727 4 года назад

ATF would have made it a lot easier, and I'd have pushed the pistons through onto the crankcase to avoid the nasties in the cylinders. My guess is that they already knew they were going to junk the engine.

@davekauffman8727 4 года назад

@@1spaghetti32 Right on bud, there was a lot of money wasted on an engine that, while legendary for longevity, will only be good for a completely restored vehicle like the Dart they plan to put it in. I think he said $900 for that head.

@rossbrumby1957 4 года назад

I would've tapped the pistons down an inch first then used a "christmas tree hone" to de-rust above. They'll tap out much easier without risking rod damage.

@lawnmowerdude 4 года назад

Dave Kauffman why wouldn’t they film them selves disassembling the other engine to begin with?

@izekealtopanga8513 4 года назад

I'd love to see you guys hop up a 318, its my favorite motor that doesnt get a whole lot of love

@lindioncicerao1247 3 года назад

Had one in my 1964 dodge dart with push button transmission. Great times in that ol thing.

@paulg444 4 года назад

i had a slant 6 from the late 70s. Dodge had decided to make the distributor gear out of nylon. They saved 5 cents on production and I ended up with nylon pieces floating around in my cam gear. Thanks Dodge!

@Evilsizer82 4 года назад

they should have used a AussieSpeed intake on this rebuild, since they have equal runner lengths vs the offy.

@otm646 4 года назад

The Australians know how to build these better than the Americans, in the States the only thing muscle car guys know are V8's.

@332ARA 4 года назад

Aussiespeed ain't a sponser

@Evilsizer82 4 года назад

@@Welcometofacsistube not sure why that would be? That just means unequal fuel distribution to the cylinders. There is a old thread that covered this in great detail on slantsix.org