RESTORATION Old brake booster | How to Seal Replacement of Brake Servo | Unique Idea 

I still can't believe he didn't just push the 2 halves together and turn about 20 degrees to release it all. Knocking the locating indents out then levering it apart? Dumb.

😅

Too much dirt in the brakes can be detrimental to the car owner's heath.

А потом блять бегают и подсос воздуха найти не могут😂

@@user-ee5ql4yc9f ага😁

Спецы ×ули сказать

@@user-zk5pp3xo4p не то слово, тяп ляп и в бой.

Nice job 👍🙏🇵🇭

ну тут хотя бы новые запчасти используют, а не помытые в грязной воде/солярке старые.

​@@alekseykasarabвсё равно ерунда. Сам похожим занимался, со своими машинами. Когда плохо было с деньгами. У ГТС зеркало цилиндра уже наверняка приехало. От коррозии, от того что там поршеньки уже поработали. Резинки по качеству тот ещё вопрос. Если их в соседнем сарайчике делают- как они будут тормозуху держать - тот ещё вопрос. Короче ресурс этого ГТС лотерея. По вакуумнику- а его регулировать не надо?

@@georgyvahrushev3908 само собой. Просто не часто у этих пакистанцев новые запчасти увидишь. Обычно промытое старое.

это всратые реставраторы от доктора дью@@georgyvahrushev3908

It's probably been "restored" several times already

Печально. Вероятность успеха 50 на 50

rubber grease? uhm silicon grease???

That's racist...nah just f-in with you...😛

فيه بعض الشحوم خصيصا لا تتاكل مع الجلود

I really don't think they did too bad of a job considering the conditions that they were working in if all they were trying to do was get their brake booster working again I think they did a good enough job if it was holding pressure and not blowing bubbles, but yeah I do think it would be a dishonest hack job if they're trying to pass it as rebuilt or even new, I just brought home a 75 mgb yesterday and drove too after sitting over a year, ran horrible but I made it,pulled the carb going to clean here shortly, but I spayed soapy water all over the booster and I'm getting big bubbles all around the two halves, I'm going to try and separate the halves and clean it up add some right stuff and press and crimp them back and see how it works

Forgot to mention yeah I had no brake booster assist at all it was a big surprise at first

@@ralphmouse2574 They usually turn and come apart no need to mess with crimping. Don't have your face near it the spring is quite spicy.

good job you say ... and ask if they changed the membrane??? M0R0N!!!

he was whipped with a rag. this is the main tool for repairs

Из говна и палок, только без палок.

Thank you too

так он им и сальники намазал чтобы им было проще обратно вылезти)))

The rag keep him clean

Thanks 😁

Welcome to Pakistan the home of feck it I'll fix it with a big hammer.

I was looking for that comment, it was one of the first things I didn't see happen, all it all though what a fecking hack there wasn't much they got right.

@@dubsydubs5234 Insurance we dont have insurance you family that just got killed when the Master brake cly blew out from the shoddy work oh well you are on your own.

Thanks Brother

Some places in the world lack parts, they're "forced" to repair this items. At this repair shop even lacks tools, he used his tongue to measure vacuum hahaha

Sorry, because you're not the only one who has a car 😂😂

I would prefer this hand repaired brake booster then the fake/replica oem ones that hundreds of thousands of people all over the world are driving on.

@@Lucas-ix8bg excatly, you are smart broo 👌👍👍

You are right

Эта жопа называется отсутствие денег.