Restoring an old Volkswagen Engine! | Part 2 

Im guessing you are talking about the fuel injection version

@@mrchilli8901 nope, any version after the md270 engine, the ea827, the iron block is very resistent and tuner friendly.

Mithic "Alta performance" engine, in had a VW 1.8 pointer with the AP and made more than 500,000km i gave it yo my dad and nowadays its still working

O motor q estraga projetos, só Tem Essa bosta Pra fazer projeto

​@@GuilhermGs7 Qualquer um pode fazer o projeto que quiser em qualquer motor isso não significa que vai ficar bom ou que vai aquentar o motor AP e mais preparado por sua simplicidade resistência se fosse uma bosta não seria um dos motores mais preparados do Brasil vai em qualquer arrancada que você vai ver essa ''BOSTA'' de 1000cv 800, 700, 600, nos turbos e nos aspirados podendo chegar nos 300cv com nitro metano com álcool chega nos 200cv

They do bro

Thanks man, that means alot! You’ve got this😊

@@Fredholm2 seems like painting an exhaust manifold was a big fault

Спроси у руских,такие моторы у нас даже школьник капиталит)))!

It’s alot of fun, and very satisfying when it works and starts in the end!😊

Thanks man, really appreciate it! Motivates me to make more videos!

Need to lay off the drugs, Skippy!!

@@BobSmith-mc7uq 1000hp in ap engines in brazil is "normal" usin 65~87psi of turbo, and all internals forged, fueltech etc. the limit is 1200hp, the block crack´s in half, ap is the LS from brazil, any performance parts is avaiable, include billet block´s for more than 87psi of turbo uses.

Is this engine code with EV is the same?

Thanks mate!😊 the carb is holding up great, have had some issues with the fuelpump, so considering an electriuc pump🤔

Thanks man! Good luck with your engine! 😊

Thanks mate!

Thanks a lot, appreciate it! 😁

Thanks for the comment! 😊 So nice to hear from you, and all the people who has a relation with these engines!

Thanks, appreciate it!😁

Thank you, that means a lot! I really enjoy doing the basic, and find it a god start or good practice for any later mods that may come! Thanks for noticing, I will get my hands on the right bolts :)

Thanks mate!😁

Thanks mate!

Thanks!😁

Thanks!😊 I used Loctite 5980, and it is holding up so far! Have also used one from würth but idon’t remember the bane! Good luck with your rebuild mate!

yes, "AP" engine. ea827.

Thank you so much!😁 I used the Haynes manual for the golf mk2 but there many options om manuals/ finding the torque specs:) Good luck with your rebuild!

Thanks, that is great to hear!😊 The «Haynes Manual» I used are for all the petrol mk2 engines! So check it out!

Bentley manual is also good I got both lol

I used Mobil 'mobilith sch 220'. That was the closes thing to assembly lube they hade at my local autoshop/partshop. You can use engine oil if it's not going to stand still for a long time before starting it. There are many other good assembly lubes, like redline. :)

Nice, if I ever work on a DX engine I will keep that in mind😊

Thanks man! 😊 I bought all the seals, gaskets and and parts like water/oil pump on Autodoc. The bearings and such at a local shop in Norway (folkevogn.no) Good luck on you restoration! 😊

@@Fredholm2 thanks alot.

I bought most of it from a local vw shop here in Norway (folkevogn.no) that specializes in old vw, and the rest from autodoc!

you can find anything you need for this engine in BR, turbo kits, internals, seals... look for VW AP

No i did not replace them, havn't had any issues with not changing them! But next time i do an engine rebuild i will! :)

@@Fredholm2 ok thanks I own mk2 also ..2021 I did rings .. bearings but the engine was still in the car..nice project when you have enough tools

@@siphoernest2278 Nice job! Still running good? :) Did you have to grind/gap the rings or did they fit out of the box?

@@Fredholm2 no didn't but so far it's still ok.. problems i had were distributor cap.. drain plug hole ..and carburettor.but long distances I've never had problems..I enjoye long distances so I make sure it's always ready

I used motip engine block paint, its holding up great!

Bardziej mnie zastanawia skąd u niego tyle sierści na ubraniu 🤔

Hello:) I use the haynes manual for the golf mk2

Hello! I used the ''haynes manuals'' for all the tourqe settings! :)

I’m no expert on this topic, but I run 5w-40 😊

It's the ''haynes manual'' for the VW Golf MK2 😁

I downloaded it from Google..

Hey! I might upgrade to an electrip fuel pump, thanks for the tip! If it leaks I will swap for rubber😊

Nice! Sounds like a good upgrade👍

Thanks!

Yes, 1.6 EZ engine from a golf MK2 :)

Hello! I bought most of the parts from a local vw shop in Norway, the rest i bought from autodoc :)

Grazie mille ha me serve una testata Golf 2 1.6cc

@32.14 you put an O ring onto the base of your distributor. When I removed mine it had a very thin paper gasket. I have a 1.5l zb in a 1974 passat, is this correct? Thanks.

Hey! Yes i know that some of them comes with a papergasket, so i think you are all good😊

Thanks mate! Really appreciate it!😁

«Mobil Mobilith sch 220» It was the closest thing to assembly lube they had at my local shop:)

Installed the engine and the starter in an later episode 😊

Learn as i go, but worked fine this time! Will use oil the next time! Thanks😊

You should get oil preassure with the starter motor after a while. Not a lot but some oil should get into the oil filter. You could also get a cheap oil preassure gauge, just to be sure :) Good luck with your engine!