Gorgeous. I recently bought a double with its rails. A real beauty. A piece of peg post had to be welded on. I love these beds exactly like you do. These cannot be replaced and deserve to be treasured.
Thank you so much. We have been amidst the chaos of moving houses and trying to finish up flooring. I am hoping to finish up the second bed frame after that.
@@WeirdyBeardyWorkshop I may need to wait for mild weather to do the sanding. The basement's damp. I can get it stripped upstairs though. Have to set my new iphone up. Not good at tech but have to figure it out. Want a before after pic.
I'm a newbie to restoring old things. I'm working on restoring a brass-plated bed frame and fortunately it's not painted. I'm sure I'll run in to painted metal in the future. What grits work well with metal without scratching? Or is it just the 400 grit on up that you used in this video?
For this particular project I just used the 400 and 600 grits with wet sanding. And used a wire well first. Best of luck on your bed frame project! Hope it gets the same enjoyment as these bed frames have given me.
How do DISassemble? I have an old iron bed frame in my spare bedroom that was here from the last people that lived here and I can’t for the life of me get it to come apart. Any advice is appreciated
Is the bed the same style as the ones in the video? If so basically the angle iron pieces that connect to the head and foot board lift out of their slots in the head and foot boards. If they aren't easily removed by hand maybe try taking a rubber mallet and gently tapping the angle iron cross pieces by the slots upwards to jar them loose. If your bed frames our different than these I would have to see them to have any idea of how they could be disassembled.
It has been awhile but I think I did one coat of primer and 2 coats of paint. If I had to guess I would say 1-2 cans of primer and 2-3 cans of paint per bed.
These are the ones. We got ours at Menards I think but you should be a able to order them online also: www.target.com/p/scotch-reusable-sliders/-/A-79391783?ref=tgt_adv_XS000000&AFID=google_pla_df&fndsrc=tgtao&DFA=71700000023604565&CPNG=PLA_Home%2BImprovement%2BShopping_Brand_Competitor%7CHome%2BImprovement_Ecomm_Home&adgroup=SC_Home%2BImprovement&LID=700000001170770pgs&LNM=PRODUCT_GROUP&network=g&device=m&location=1019973&targetid=pla-893654310696&ds_rl=1246978&ds_rl=1247068&gbraid=0AAAAAD-5dfYczvuudxxBdEWwHeL7xmBbL&gbraid=0AAAAAD-5dfYczvuudxxBdEWwHeL7xmBbL&gclid=CjwKCAjwuvmHBhAxEiwAWAYj-Ch0rZk9qRXRvB5ttzeWfwrSR43QJqGFCrs-yPCKGTcSMl6nstTxvBoCMTcQAvD_BwE&gclsrc=aw.ds
@@farhadjan7427 There might be alternatives to my approach that require less nuts and bolts. Perhaps ropes or something might help you solve your problem?
We plan on keeping them for our daughter's beds. Check out the virtual tour of our new home here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8NCEb0KLwPQ.html
I never officially tested it, but I can say that I would be surprised if it did not, which is why I was careful to use paint stripper and when sanding to use water and wet sand.