Head to squarespace.com/oddtinkering to save 10% off your first purchase of a website or domain using code ODDTINKERING In this video I'll restore a trech art lighter shaped like a book from World War I. The lighter was handmade by someone during the war. It was not designed to have the wick and cotton replaced because it was soldered shut. I desoldered the triangle pieces of copper to remove the "hinge" and then I desoldered teh bottom of teh fuel tank to remove the cotton and old wick.
I cleaned most of the oxidation off with vinegar. Then the parts were sanded with multiple grits of sandpaper up to 2000 grits and polished with a buffing wheel. New wick and cotton were inserted and I made a new hinge to replace the old one. All the pieces were soldered back on using a heat gun. When using a heat gun it's important to make sure other solders on the part don't meltand all the parts don't fall off.
The following links are affiliate links. By clicking them you are directed to a amazon (or other) product page. If you purchase that or any other product I will get a small fee but you will not pay any extra. This is an easy way to support this channel and allow me to keep making these videos. Thank you for watching and reading!
---------------------------------------------------------------------
Patreon: / oddtinkering
T-Shirts: teespring.com/stores/odd-tink...
Instagram: / odd.tinkering
Some of my tools:
Soldering station with heat gun: amzn.to/3AdEbGa
Polishing kit: amzn.to/3NuyeY8
Replacement wicks: amzn.to/3yqaAb5
Zippo fluid: amzn.to/3I2wvbx
Zippo flint: amzn.to/3AcpbYV
Black gloves: amzn.to/2YY8a09
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ / @oddtinkering
---------------------------------------------------------------------
28 июн 2022
