Тёмный

RESURFACE YOUR ENGINE BLOCK AT HOME FOR BROKE FOLKZ 

OLDSKOOL TRIED & TESTED
Подписаться 253 тыс.
Просмотров 123 тыс.
50% 1

This is the easy process of resurfacing an engine block at home . I forgot to mention when installing your head gasket use copper spray to help seal your head gasket, it works excellent. Keep Jesus Christ first and at the center of your life. In his holy precious name AMEN.

Авто/Мото

Опубликовано:

 

4 окт 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 774   
@firstnamelastnameisallowed7943
I've done paint and body for the last 13 years and I have done this very thing multiple times to engine blocks and heads and it works great! A tip I have used to help out is after you have sanded it and it's all shiny but not straight yet, I got one of those fat tip magic markers and any color works really other then silver, and you color in the entire top part that you are sanding on and wherever there is a low spot or scratch whatever the marker stays in it visibly showing up that you need to sand more there until it's gone. It's used in body work just with different materials, called a guide coat!! Works out very well and being able to see it helps out big-time if u have never done anything like this and you are nervous at all!! Just wanted to share this with everyone!! Sorry for the novel I wrote here :/
@babajay8217
@babajay8217 5 лет назад
Thanks for sharing
@oldskoolfunk71
@oldskoolfunk71 5 лет назад
What's up peeps? Sorry it's been a while since I posted a video, I missed posting for you all. I have been working on a lot and since I have been asking God to take me to the next level in ministry I have been through some heavy fire from the enemy. No worries though God has built me up and I'm even more BATTLE READY. Never forget God is a God of provision and will always provide. Stay faithful and strong in the Lord. If you serve and live for Jesus Christ your faith is going to be tested to see if it is valid. Don't ever stop fighting because in these last days before Christ's returns times are going to get harder and Christian persecution is on the rise, But show no fear ( fear not for I am with you ) Isaiah 41:10 Fear thou not; for I am with thee: be not dismayed; for I am thy God: I will strengthen thee; yea, I will help thee; yea, I will uphold thee with the right hand of my righteousness. Time to go to war! Keep on smashin in JESUS MIGHTY NAME! God Bless you all.
@bradleywise835
@bradleywise835 5 лет назад
I do the same thing,the only difference is i use rempered glass,wich tends to be perfectly flat,same plan though,i learned about it from a old timer who use to do military jeeps in the field,for a grip i use a bondo suction cup grabber,
@bradleywise835
@bradleywise835 5 лет назад
Great videos like usuall,god bless
@angelhernandez-zv3lf
@angelhernandez-zv3lf 5 лет назад
@oldskool funk glad to have you back my man. Keep making these videos.
@topdogega4664
@topdogega4664 5 лет назад
I have been waiting for some more old school how to videos. You have inspired me with your passion for Christ and tenacity to get the word of Gods message out. Incredible mechanic, thank you so much. It’s your season and I am ready to go to war with you in the name of Jesus Christ. SMASH IT Brother in Christ.
@mikeriverajr4447
@mikeriverajr4447 5 лет назад
Hello Old School Funk Please read! you are such an inspiration to many and have helped me greatly in the past. . . .,Im so gratefull you make these videos and have prayed for you previously and will do my best to remember to keep you in my prayers. . ., not that i need to sand an engine block but because I love your strong zeal for God and I pray that God continues to bless you. . . Psalm 83:18 (KJV)18 That men may know that thou, whose name alone is Jehovah, art the most high over all the earth. I just want to share with you something that is so important , and that is Gods Name, Gods name in hebrew is י ה ו ה / YHWH] and when it is translated in English it is Jehovah [Transliterated Yahweh] Gods name is used over 6900 times however has been removed in most bibles due to the tradition of the Israelites not wanting to violate the commandment in Exodus 20:7 which says "Thou shalt not take the name of the LORD thy God in vain; 2 interesting things to note here about this scripture. . . 1]most translations Render Jehovah's name as capital LORD to distinguish it as Gods name as opposed to [lowercase] lord which is used as a title for example when Sarah called Abraham my lord [gen 18:12], none the less : lord whether spelled "lord" or "LORD" is still a title like Mr, Dr, or SIR, senora etc So this really should read "Thou shalt not take the name of Jehovah thy God in vain;" 2] that scripture says to not use Gods name in vain:. . . if we look up the definition of vain it says :producing no result; useless./having no real value Well ironically by removing gods name over 6000 times from the bible in effect the modern world has made Gods name usesless/vain, This is especially true with you consider scriptures like : pr 18:10 The name of "the LORD" is a strong tower: the righteous runneth into it, and is safe. WHICH SHOULD BE RENDERED pr 18:10 The name of JEHOVAH is a strong tower: the righteous runneth into it, and is safe. OR Joel 2:32 And it shall come to pass, that whosoever shall call on the name of "the LORD" shall be delivered: With out using gods name in the above scripture it is the equivalent of saying "whomever calls on the name of the doctor will be delivered. the problem is: which doctor are you referring to, there our thousands of named doctors or in this case false gods out there but only one divine God [Jehovah, art the most high over all the earth.] Notice the difference Joel 2:32 And it shall come to pass, that whosoever shall call on the name of JEHOVAH shall be delivered: God always used his name to distinguish him from all the false gods and to distinguish him as the God of his people. For example Exodus 3:15 [ASV] And God said moreover unto Moses, Thus shalt thou say unto the children of Israel, Jehovah, the God of your fathers, the God of Abraham, the God of Isaac, and the God of Jacob, hath sent me unto you: this is my name forever, and this is my memorial unto all generations. Even Jesus opening words in his famous prayer was our father in hallowed be thy name and john 17:6 jesus said"" I have declared unto them thy name, and will declare it: that the love wherewith thou hast loved me may be in them, and I in them.""" I know you love your King James bible and there one of the very few bibles that still has Gods name in it in several places. . interesting enough although they kept the tradition of the Jews in not saying/writing Gods name they knew it was important enough to keep Gods name in these places in the king james bible: Exodus 6:3, Psalm 83:18, Isaiah 12:2, Isaiah 26:4 and three times in compound place names at Genesis 22:14, Exodus 17:15 and Judges 6:24. something else is that in 2015 group of translators restore Gods name to the King james . Its called the divine name King james. i dont currently own this bible, but as a gift I'd love to purchase one and send it to you if you have a Po box or something , May God bless you in your effots, stay strong my brother and have a blessed day!!!!!!!!!!!!!!!!!
@thilolg
@thilolg 5 лет назад
Finally a video after so long . We missed you bro. God bless you
@pedrosilvaslva2625
@pedrosilvaslva2625 5 лет назад
God bless you too.
@wtfman5313
@wtfman5313 5 лет назад
I was lucky enough to acquire a 10X10 half inch sheet of tempered glass that I epoxied to a 3/8 sheet of steel. Works unbelievably well and I got the idea from OLDSKOOL! My thumbnail picture is the finished product of my Son's 03 Civic that blew the timing belt and we resurfaced the block and head with this technique back in August 2016. Still runs great today!
@ClumsyCars
@ClumsyCars 5 лет назад
Ive used the same method on the same head with a 3/8 inch thick glass table. Also still going strong.
@hhelmejor5485
@hhelmejor5485 5 лет назад
love it wrench spinnet, is the sheet of steel for the handle? could u share a picture so we can benefit from your comment, thanks!
@JustinGoodwin84
@JustinGoodwin84 5 лет назад
"Put some Holy Ghost Fire to it" Amen brother! Great video! We missed you man!
@importlogic
@importlogic 6 дней назад
Car guy and a man of the kingdom? Count me in! Earned my subscription
@0001070181
@0001070181 5 лет назад
Tip: Mark your low spots with some type of paint prior to sanding. One you start sand, the paint will start being removed once the surface gets closer to being true. Then at that point start checking for warpage.
@conservativeteacher1987
@conservativeteacher1987 5 лет назад
Thank you for your videos brother! I used your old school techniques to clean up a set of warped heads and cylinders on my Harley. It worked very well and the bike is running as good as new. Saving money is great, but the pride you can take in doing the job yourself is even better. God bless!
@Godsoldier
@Godsoldier 8 месяцев назад
I did my Girls 2002 Tacoma 2.4L with a sand paper holder for sanding walls that has a Handle, you get the same full sheet and split it in half, the cylinder was not warp I sanded for 3 hours and look Amazing and flat, and timing belt thanks to you and you encouragement, 3 days running with no check engine light, so far so good and with the money i saved i changed all the sensor, especially the hard to get to. Thanks!! for you Awesome Videos
@pauldulworth2768
@pauldulworth2768 5 лет назад
Preach!!!! Simple, plain, AUTHENTIC, word of God preaching. You are touched by His hand. I feel His word and His love delivered by your words. God is working through you to reach all of us. Not all will hear but those of us who do will be better for your efforts in the Lord’s name. God be praised and so may you be blessed, my friend.
@doomthaking9
@doomthaking9 5 лет назад
I am so inspired by you sir, I just finished this video at work and even my boss and head mechanic(who are Chaldean by the way) couldn't do anything but look and smile at a man of great faith, teaching and inspiring us young mechanics and people of all walks of life to persevere and SMASH ON IT IN JESUS' NAME.Many blessings to you and yours, as well as to those who need it.
@scottwitkowski1298
@scottwitkowski1298 5 лет назад
You getting another jewel in your crown with every video you. Matthew 7:20 says you'll know them by their fruits. You keep putting Jesus first in every video. Im also loving car tips and flipped my first 2 cars this year. God Bless ya Brother
@douglasphillips24
@douglasphillips24 2 года назад
I used to DIY for myself for decades as a angry drug addict who would curse & smash things as I worked through problems such as auto mechanic or home repair which always left me very distressed & dependant on drugs to get through. I don't need that junk anymore but rely on Jesus Christ as my drug now because A Holy Ghost high gives me peace & Joy in the midst of life's challenges & trials but never leaves me lonely or disappointed. Trust in JESUS CHRIST. I always pray for guidance before working on anything now & He Always helps guide me through without getting angry but thankful & Humbled by God's Love.
@AztecRay
@AztecRay 5 лет назад
I'm an Atheist, but still love your vids and gospel speeches. Respect
@LouPicardo
@LouPicardo 5 лет назад
I was about to say the same thing
@95TurboSol
@95TurboSol 5 лет назад
Yep it's nice to hear everyones views on stuff even if you don't agree.
@nicparker3809
@nicparker3809 5 лет назад
Just pissed and poor eh pal
@boogieii6492
@boogieii6492 5 лет назад
aztecray1980 You an atheist..I’m a Capricorn 😂😇
@lildeena1
@lildeena1 4 года назад
Probably not an atheist. When something goes wrong in life and near death you may find yourself asking god for help. At that point you’ll find out.
@andysjamsandgearslams2556
@andysjamsandgearslams2556 5 лет назад
Amen !! Man ive been watching your videos for a while now and truly God is using you to send his message!!! Everything your taking about had fallen perfectly in line with my life. From measuring the straights of a cylinder head and ruler to the scriptures you quote. I'm all in brotha. Id like to help support. I'm in Jax fl, not sure where u are but keep it brother bc your helping change lives with your videos
@c4hydro284
@c4hydro284 5 лет назад
Thank you so much for the good word and the lesson. Did this on my 22re and soon on a d16. Watching this with my son and daughter. Teaching them good work and God's work. God bless
@debalexander7888
@debalexander7888 5 лет назад
I love your videos. I first started watching you when I bought a 2004 Buick Lesabre for my son. I was having so many challenges with that car. After watching your videos...i felt so confident that things could get done. I also admire that you are a MAN OF GOD n give the WORD!! Keep on uplifting and encouraging. Thanks
@rupert1124
@rupert1124 4 месяца назад
Imagine it's your first day in the workshop as a trainee and this man is your instructor. You just can't loose with this sort of knowledge and attitude. Thanks for a great video.
@peterleonard5947
@peterleonard5947 5 лет назад
I just fixed the heater/fan blower in my 92 subaru liberty. My gf was nagging me to buy a new car, coz summer is coming up and need that AC. Handled it, and 5 minutes later you posted this video. Word up
@DiegoAlvarez-lf8us
@DiegoAlvarez-lf8us 3 года назад
Listen guys, this dude knows his shit and I can respect a man of God and a man who can DIY a whole redecking but for those who don't know how to work on cars just take it to the local machine shop and support small business. Redecking a cylinder head is absolutely, one thousand percent no joke and requires SERIOUS experience. Not just redecking it but disassembling a cylinder head from a block is time consuming if you don't have the correct tools and/or time and storage. DIY when you can but if you truly are broke, why risk blowing yet another head because you wanted pinch pennies. Shoutout to my man right here for giving his time and knowledge but WOULD DEFINITELY NOT RECOMMEND DOING THIS if you have never worked on a car
@marcstecker746
@marcstecker746 3 года назад
Thank you brother for the demonstration on resurfacing an engine block. I love your attitude and I like the way you remind us all why we were given a chance at life and who we need to be thankful to. Wish I had you as a neighbor.
@mikethemobilemechanic2683
@mikethemobilemechanic2683 5 лет назад
Good to see you back Funk, a lots happen since you last posted a video. I started my new mobile mechanics business and a lot of my influence has been from you. My very first you tube video was influenced by you. Good to see you back, keep smashing.
@johnraisanen5131
@johnraisanen5131 2 года назад
I used your method for the first time on a 96 vw jetta 2.0 cylinder head and it worked great. Keep up the good work and the faith brother.
@uniqueballard7996
@uniqueballard7996 2 месяца назад
I’m here now bout to sand down my vr6 for my Jetta
@7giop13
@7giop13 5 лет назад
Welcome back! I loved watching your videos, started watching them when I wanted to first become a mechanic, all glory to God, Ive been a mechanic for 4 years, so far so good. You really inspired me with your videos. Good to have you back
@lovelycali3
@lovelycali3 5 лет назад
Yes a new video glad to see your doing well. God bless you and your family. keep the video's coming.
@True_Smoke
@True_Smoke 3 года назад
You spoke it, we are going through war but us with God will prevail through this pandemic
@christinmerc2336
@christinmerc2336 4 года назад
I stumbled upon your video brother when searching solutions for my car it's amazing man keep preaching Jesus
@FZERO20
@FZERO20 Год назад
I’m definitely doing this on my head gasket job. Did it once in the past but only resurfaced the head at the shop. A couple months later it failed. This time I’m doing both. Thanks for the video, this is an excellent idea
@40sikarios
@40sikarios 5 лет назад
I saw the first video on how to do that . I did it on my 93 Honda Civic saved me a ton of money the shop wanted 600bucks to do it thanks man really appreciate all the knowledge
@lostmoneygarage687
@lostmoneygarage687 5 лет назад
Very nice. I use a flat piece of steel from a squared, level welding table. It's about 20" wide by 12" deep by 2" thick. Gotta be 40 lbs. With 80 grit you can do about 10 passes. I usually will go 2 strokes one way, 2 another. I learned it from your head video actually and just apply the same concepts. Keep it up man. Good work.
@manuelbejarano6121
@manuelbejarano6121 5 лет назад
Welcome back Oldschool, great to hear the Word and get inspired with your work... Gracias!
@1NOnly228
@1NOnly228 5 лет назад
Good to see you back on. Definitely one of my favorite youtubers. You give great advice and life lessons. Keep up the good work
@andyd7219
@andyd7219 2 года назад
Great video brother, I found you because I was looking for ways to work on my block but your video speaks volumes to me because I'm starting another journey that you know only to well. when I get a chance ill be looking at your other videos. no complaining, no whining lets just get it done
@Hardeststyler
@Hardeststyler 5 лет назад
I have 2 H series blocks just sitting there.Watching your videos makes me want to do all that work my self.Thank you for your efforts.
@Timmyskills
@Timmyskills 4 года назад
This right here, Is what America is all about.
@stephenh.bunkybyrd2024
@stephenh.bunkybyrd2024 4 года назад
Thanks for you informative automotive videos; but more importantly, thank you for your witness for Jesus Christ.
@makepeace2850
@makepeace2850 5 лет назад
The first 2 minute of this video is powerful rebuke that satanic bullshit. The Almighty God is the only way. Great respect for you my friend.
@2LateIWon
@2LateIWon 5 лет назад
You are right!!! Love you preaching the word of God everything else is like icing on the cake my friend
@zmonstamaui
@zmonstamaui 5 лет назад
Dam you give me motivation to be a better man!! Life has been tough lately and has really tested my faith and questioned my sanity. I'm a mechanic by trade and your vids give me motivation to smash on my side jobs and projects. Mahalo bro from the 808
@resterpastel5913
@resterpastel5913 5 лет назад
808
@gfunk5994
@gfunk5994 5 лет назад
Keep making them videos!!! Nice to see someone providing alternatives for people who don’t have the money to just take their car to a shop to fix.
@MB-xq3ol
@MB-xq3ol 2 года назад
you are the man, you did it an outside parking lot, and I like your teachings also, somehow get it to the young men in the hood 16 to 30 year olds are running wild., my iron duke 35 years old just blew head gasket, tried the liquid fix and it didn't hold. thanks for the tips.
@tombob671
@tombob671 5 лет назад
Glad you are back, great video. "Adapt and overcome " I learned it in the Marines
@arwoodbt
@arwoodbt 5 лет назад
Keep the faith brother ... ur doing Gods work on a evil platform...Good to see people bold in the faith
@dankollars4501
@dankollars4501 Год назад
what works a lot better is get a piece of scrap granite, put it on a flat table, i use my table saw. glue the sandpaper on the granite, glue enough pieces of sandpaper down so its a big enough that the block will never fall off the sandpaper while sanding. flip the block upside down on the sand paper and move the block back and forth. let the weight of the block push down for you, no need to put force on the block or head. of course this wont work in the block is in the car. I really like your vids and the message you give to people, wish we had more like you. thx
@nelvinflores9341
@nelvinflores9341 5 лет назад
Thank you for all the teachings you have given me, they have taught me a lot, thanks my brother and God bless you.
@ThomasMurray7
@ThomasMurray7 3 года назад
You're a life saver. Bout to do the same to a Subaru boxer engine. The machine shop wanted to charge $1200 for both heads and both halves of the block. I'll let you know how it goes!
@matthewpeoples3766
@matthewpeoples3766 2 года назад
God bless you my brother for educating people that don't know. kids just see cool brand designs. love you brother.
@Zelaznogsiul-63
@Zelaznogsiul-63 5 лет назад
Love your approach, mechanical work with a message from the word of God.
@robertgonzalez8419
@robertgonzalez8419 5 лет назад
Ephesians 6:12 we do not wrestle against flesh and blood but against principalities against powers against the rulers of the darkness of this age against spiritual host of wickedness in the heavenly places. And the word wrestle in the Greek means to the death. people got to understand this warfare ,the devil wants to kill you. it’s like you said brother you got a handle your business and learned that the devils under your feet ,but that only applies to the sons and daughters of the most high God. God bless you and your family. I came across this video I was glad it’s good to see another brother fighting the good fight of faith, by the way where are you from
@thinkingmonk9676
@thinkingmonk9676 2 года назад
This man has helped me make thousands of dollars. God bless him.
@charger19691
@charger19691 5 лет назад
I missed you Old School. I'm so glad to see and hear from you again. I missed your teaching about cars and about the Lord. I hope you and your family are doing well. God bless.
@bigt9391
@bigt9391 5 лет назад
Man I miss you man good to see you back on RU-vid thanks for the the auto tips and the sermon always appreciated man it's great to have you back
@Curtiswrxboy
@Curtiswrxboy 5 лет назад
AMEN BROTHER KEEP IT COMING !!!! MAY GOD BLESS YOU SO YOU CAN KEEP SPREADING THE GOOD WORD!!
@miketiny6088
@miketiny6088 14 дней назад
Watching your video, you make auto repair simple, wish I was your next-door neighbor
@javaidmalik1
@javaidmalik1 5 лет назад
Hay man it's nice to see you back your one of my favorite mechanic thank you for sharing your thoughts
@dubbleA100
@dubbleA100 5 лет назад
God Bless you brother! I'm about to do my cylinder head resurface today. My block is fine, but I might do it anyway 🙏🏿
@impervious.27
@impervious.27 5 лет назад
Peace, brother... Good to see you still active on youtube... I'm grateful for what you provide... Many blessings... I dig how you broke it down at the end... |[ Truth ]|
@jackjonson2696
@jackjonson2696 5 лет назад
Hi just wanted to say its good to see you back an well. Thanks for all your help to everyone
@tomfetter4011
@tomfetter4011 5 лет назад
Good to see you back. Praying for you - a person who sticks their neck out as you do draws attention, eh? Draws fire. So I'm praying for you. Love the videos - my son and I have been working to rehab an old Ford Ranger, and your stuff has been a big help.
@joelane5698
@joelane5698 5 месяцев назад
I started watching you years ago I still have one of the videos when you resurfacing an engine head it might have been a Honda You're the reason I'm surfacing my own engine heads so I thank you wish I could send you a picture of them 🙏🏽
@mexzcanninja7412
@mexzcanninja7412 4 года назад
Love your opening message. Family will always be family. If its money, chatter or evilness, be the bigger one and just let it go.
@ManicMechanic007
@ManicMechanic007 5 лет назад
I am glad to see you back. Thanks for the demonstration and the inspiration.
@OnlineAutoRepairVideos
@OnlineAutoRepairVideos 5 лет назад
HEY LEN, yeah it is cool to see him back!!!!
@ManicMechanic007
@ManicMechanic007 5 лет назад
Oh Yeah it is!
@CSJiGSaW08
@CSJiGSaW08 2 года назад
oldskool funk, we need more instructional videos and mechanic stuff. You are great!!
@OddPilot_
@OddPilot_ 5 лет назад
People that didn’t catch the end..,..go watch the END! Racism is horrible!! Hate is HORRIBLE!! Stay blessed my friend
@pddejager1
@pddejager1 5 лет назад
Love your videos - picking up lots of tricks to use when it gets warmer to work on cars (you can't do much as a back yard mechanic in late november). I love your attitude. Just an awesome!
@malcolmyoung7866
@malcolmyoung7866 5 лет назад
Good to see you back, Brother....love your videos and EVERYONE needs a little 'Old Skool Funk'...
@nicparker3809
@nicparker3809 5 лет назад
Keep up the videos. I am really blown away with your skill and find joy in your videos.
@petelowenstein5362
@petelowenstein5362 4 года назад
You, my man, are a blessing to the lost souls in this world with your testimonies for Jesus Christ. I know the war that goes on between satan and the Holy Spirit within us. I fight it daily, just like you do. We are so blessed that Jesus has forgiven us for all the crud we've done in the past and we will not get what we deserve in the hereafter. I look forward to the day I can shake his hand, fall on my knees, and thank him personally for what he's done for me. Keep on truckin'.
@113036stat
@113036stat 5 лет назад
Thank you for instilling confidence in those whom over think things!! Love and peace oldskool!!
@Felixfixitfelix
@Felixfixitfelix 5 лет назад
True motivation for diy'ers,thanks man I appreciate your tips and tricks and to save money, great informational video.
@OKRODDER
@OKRODDER 5 лет назад
hey brother, I use greased rope when i resurface blocks like that it holds the metal filings really well. Thank you for sharing.
@Greg-tj8rg
@Greg-tj8rg 3 года назад
That's a great idea. I was thinking something like a plumbers putty might work well to
@tonymaciasjr8862
@tonymaciasjr8862 4 года назад
A bro this is the realest video I've seen so far on RU-vid keep doing what you're doing man ,much love to you and your fam bam
@waltschannel7465
@waltschannel7465 5 лет назад
Good job getting rid of the evil!! No whining, AMEN!! Excellent resurfacing advice as well. Lots of good topic to get the job done well, and cheap!
@qigongstudent
@qigongstudent 5 лет назад
Congrats man. Thousands learning with you, like me. Thank you.
@killuificould
@killuificould 5 лет назад
I love your videos! So happy that you are back in action!
@getmorecontent.
@getmorecontent. 5 лет назад
Me and my Fiance are happy to see you back OSK! God Bless you and your family in Jesus Christ Mighty name and Power! Baby is soo cute!
@thomasalexander1851
@thomasalexander1851 5 лет назад
Glad to have you back and know your well.
@Loustylz203
@Loustylz203 5 лет назад
I opened my bible to read the verses and it flopped right to the page without having to search. gave me chills
@mannyreyes1393
@mannyreyes1393 5 лет назад
Love you brother, keep smashin that devil in Jesus Christ.good to see you back bro,many rise up against me they say there’s no helping to God with our Lord and our shield for me the glory the lifter of my head
@neverstoplearning382
@neverstoplearning382 5 лет назад
thank you and welcome back. Amen.
@ricardocenteno375
@ricardocenteno375 6 месяцев назад
Love you’re videos bro learned auto mechanics since 1995 went to school
@johnyoutube808
@johnyoutube808 5 лет назад
Talofa from hawaii, god bless your family. You do honest work, keep it up.
@omillie32
@omillie32 5 лет назад
BIG LOVE
@Billhatestheinternet
@Billhatestheinternet 5 лет назад
Nothing wrong with your explanations. I drove my ex nuts with the explanation of how you ground valves with a vacuum hose. Dammit, I had a 300 L6 Ford ground down to where it would take each port over 8 hours to drain a load of diesel. Only then did I put the head back on the block.
@OnlineAutoRepairVideos
@OnlineAutoRepairVideos 5 лет назад
Welcome back Oldskool!!!! A lot of people look to you for moral support and guidance. Maybe consider a short video once every two weeks, not necessarily a repair, just spiritual support...
@mrfixit-sm6cf
@mrfixit-sm6cf 5 лет назад
astral love the channel man ty for all ur vids
@OnlineAutoRepairVideos
@OnlineAutoRepairVideos 5 лет назад
@@mrfixit-sm6cf Sorry about not replying, I am JUST seeing your comment now!! I did not get a notification, and just stopped by to check out the new comments, then I saw your replay. I REALLY appreciated that, THANKS!!!! 👍👍
@phareztrinimand
@phareztrinimand 4 года назад
Yeaa buddy
@williamparada4630
@williamparada4630 5 лет назад
A child of the lord, keep motivating man
@PBWillyWonka
@PBWillyWonka 5 лет назад
thank you so much!! im about to start my cheap engine build on a crown vic. that 4.6 2v might need to be resurfaced from heads and block. im about to tackle im my own in my own garage. you videos are great source to learn and do things with your own effort.
@edmundfitgerald9411
@edmundfitgerald9411 2 года назад
Great simple diy instructional video thank you for sharing.
@MaGeeVer420
@MaGeeVer420 2 года назад
Aye brotha thanks for all the groovy advice and tips. You one Cool Cat!
@juanteran1905
@juanteran1905 5 лет назад
Finally another video! Dont let the devil keep you from spreading the love and knowledge you the man oldskool funk!
@mkIIIsupras
@mkIIIsupras 5 лет назад
One thing I'd like to add. Some engines require you to have the front timing cover bolted to the engine while being machined so you don't end up with a lip which can cause premature gasket failures. Other than that, this is just old school tricks that still work to this day. Cheers Funk!
@Volusiaev
@Volusiaev 5 лет назад
Glad to see you back! Bless you my brother.
@mowcee1
@mowcee1 Год назад
This came in handy. Was debating about sanding my deck down myself, with the block still in the car. By using your technique of paper towels an blocking all the ports/passages, it should work. It was either this, or taking a chance on a slightly warped deck (.0025 between cyl 2&3) mated to a resurfaced head, an using some copper spray on my HG. Acceptable OE warpage limit is under .004
@thetdiguy3140
@thetdiguy3140 5 лет назад
Very nice video. It awesome to see Christian that's not afraid to talk about the spiritual side of our faith.
@robertrosete9510
@robertrosete9510 3 года назад
Watching this cy2020 im amvery inspired by your video and dicided to sand my block just now not yet finish but the result is awesome, its hard to find long sandpaper here in philiphines so i buy cheap one. Great video big help for us those cannot afford machine shop love your work simply the best
@VinzofTay30
@VinzofTay30 5 лет назад
Thanks for the upload been waiting on a video for a while now. 👍👍👍
@hawkakroma
@hawkakroma 4 года назад
Greating brother. My name is Jeremiah and as a mechanic myself, I thought I was oldschool, but you are A King of what you do & I respect that a lot bro. About you salvation and warfare issue, think I need a warrior with a deep seated fire like you to stand with. If you wouldn't mind, please lets hook up for some battle strategy. Peace be with you brother. I love you sir. Semper fi.
@davidpagett8882
@davidpagett8882 3 года назад
Man, I love your work!! Both mechanically and spiritual. You speak so much truth about both subjects! Racism is another vile facet of Satan’s arsenal. It’s time for us all to WAKE UP and see the truth, we are being played off against each other, and fools fall for it every time. Stay blessed, Dave.
@stevenmchenry9276
@stevenmchenry9276 5 лет назад
Old school it's been a while. Glad to see you. Feb 7, 2019 I'll be graduating Tulsa Welding school.
@kris8263
@kris8263 5 лет назад
Love you man. Nice to see you back. Keep on spreading the truth brother. Love your "And 1" shirt.
Далее