Retrofitting Cruise Control in a Citroen Berlingo - Talk Through Guide

Подписаться 49 тыс.

Просмотров 16 тыс.

50% 1

A talk through guide of how to install cruise control on a Citroen Berlingo B9.
For a more concise and condensed version view this video:
• Citroen Berlingo B9 Re...
The process of retrofitting cruise control and speed limiter into a 2011 Citroen Berlingo B9.
This should work on the Peugeot Partner which is basically identical to the Berlingo. The B9 was sold between 2008 and 2018. There may be some slight variations in part numbers used between those years which is why i would recommend doing some research on owners clubs or finding wiring/parts diagrams to double check.
The general process will be very similar for most PSA cars, parts have been shared between different cars. The cruise control stalk came from a 407, the accelerator pedal came from another berlingo but could have come from a 207 or 3008 to name a few.
This is a relatively cheap and easy modification to do, the parts cost was under £40, even considering that diagbox had to be bought from eBay for £40 it is still not a bad price to pay to get such useful functionality.
I have also uploaded another version of this video with me talking rather than using the subtitles. Personally as an engineer i prefer the concise delivery of information that this format provides but for anyone wanting to listen to a hard to understand accent please enjoy:

Опубликовано:

7 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@KevinOsborne1987 2 года назад

I've done this upgrade on all my partners/berlingos since 2008 and it's worked on all of them (as long as you enable the right options on diagbox!!)

@graemeconnelly8849 22 дня назад

I bet the drivers of these have been happy as a result

@bsimpson6204 2 года назад

Just used your video to fit the pedal and control for cruise control, took me maybe 40mins to do, brilliant truly guide. My only comment was the cable onto the pedal had virtualy no slack, still managed it no problem but everyone be awear. Now to get it enabled...

@realcon5086 11 дней назад

did you get it enabled?

@SparkMomentum01 Год назад

A good way of making the better looking VTR as good as an XTR!

@peugeotCitroen2CV Год назад

I never noticed a huge difference to be honest, the XTR has more of an off road look about it? They are all still rather boxy looking vans.

@SparkMomentum01 Год назад

@@peugeotCitroen2CV I much prefer the vtr's colour coded bumpers etc. Must be the only car where the higher spec has less paint

@jobbiejew 3 года назад

Taking delivery of the parts tomorrow (pedal and stalk). Watched this video over and over again so hopefully tomorrow’s installation will go off without a hitch. Will report back.

@jobbiejew 3 года назад

Thanks again for the PM’s on messenger @peugeotCitroen2cv. Following your instructions and got cruise and speed limiter working spot on. My 2012 Berlingo Multispace 1.6 hdi 8v with EDC17 engine ECU and 9HP wouldn’t work on any other version of Diagbox other than 7.02. If you get ‘invalid key’ and you drive a 2012 downgrade Diagbox to 7.02. 7.01 - did not work 7.02 - WORKED 7.57 - did not work 7.58 - did not work 7.62 - did not work 7.66 - did not work No version between 7.66-7.83 worked 7.82 - did not work 7.83 - did not work. 7.02 was the only way to go in case you get stuck. Thanks again for the info and the video. Now tempted to try your other videos :) Next tasks for me are: - front top strut mounts - fuel leak from near fuel rail - dpf - blower fan motor That EML I had in the video I sent you was to do with the DPF blocking throwing up other random codes. If you kick it too hard it does that for me occasionally. I need my dpf erased 🤣 Need my blower fan motor replaced. Relay is fine. No blow on any settings. Still get a residue amount of heat or cold depending on the setting but still not blow. Know any easy ways of getting to the blower motor? I have a vague idea of it being under the steering wheel and above the pedals but by Christ is it tight.

@jobbiejew Год назад

That old car does 18 months ago. My new car got wrote off so I’ve picked up a Peugeot partner 2012. Is the process the exact same?

@KevinOsborne1987 2 года назад

Interestingly there is an additional part/clip that holds the stalk in place which I discovered when taking a stalk from a factory fitted cruise van.

@Peugeot308_2.0hdi Год назад

Thanks works great at the new version 9.1.1

@stephenrose5611 2 года назад

What an excellent video.

@peugeotCitroen2CV 2 года назад

Thanks for the comment

@teebee8905 5 месяцев назад

I took my 2013 Partner Teepee to a Peugeot main dealer last year, to get cruise retrofitted. They were confident they could do it, checked, installed & programmed everything, but then found on the roadtest that the chosen speed wasn't retained - it flashed back to 10mph or something. After 2 days investigation they admitted defeat, and refunded me what I'd paid for the work. They did mention that there was a fault code related to the resistance of the accelerator pedal (rheostat) which they thought could be relevant - quoted £400 for replacement! As the cc switch is still fitted (Thanks Peugeot!), it would be great to get it working. I did buy a second -hand accelerator pedal on Ebay, but never got round to fitting it. Is swapping the pedal out worth a try - or is the problem more likely to be with the programming?

@Aliabbas07 Год назад

An excellent guided video! Hoping to tackle this next weekend. I wonder if you may be able to help. What's the software/tool you used at the beginning to diagnose whether your brake and clutch pedals had the appropriate switches?

@adilnoor2300 21 день назад

Which diagnostic tool you used to check live stream? Will this be same for 2015 Peugeot partner tepee, Thanks

@howlingbeats2544 3 месяца назад

Hey, mate! I've got a 2006 Citroen C2 VTR 1.4l petrol manual and was wondering if you'd know the correct part number for the compatible pedal. Thanks in advance!

@peugeotCitroen2CV 3 месяца назад

Hi there, I wouldnt be just 100% sure of the part number for the C2 but have a look on Catcar.info if you take a look through the part diagrams on there you should be able to see whatever option correlates to your spec of car and the pedal you are looking for. Its one of those sorts of searches where your best making a cup of tea first and enjoying your time at the computer.

@goldielocks2621 2 года назад

As we say, dead on man! Now I want to ask you a question, I have a 2014 Citroen Dispatch and I would like to change the twin seat to a single do you know if I can and if so which donor vehicles will be suitable.

@peugeotCitroen2CV 2 года назад

Haha they say that here also. Where abouts are you from? The dispatch, not entirely sure, was the E7 taxi version equipped with twin front seats. I think there is a dispatch/boxer (is that the peugeot equivilant?) facebook group ask on there they should be able to give you ideas of what seats to use.

@goldielocks2621 2 года назад

@@peugeotCitroen2CV The Occupied six Counties!☘ Goraith maith agat

@goldielocks2621 Год назад

Hello again, I have been trying to get my cruise control working on the Citroen Dispatch 2014 the limiter works and when the diagnostics are connected cruise works intermittently. The guy who done the testing has checked everything on the computer but it still wont work, do you know what else I should try.

@andrewwalker9479 2 месяца назад

Hi quick question. I got my Citroen xzsara picasso 2007 second hand. It already had the CC control stick installed when I got it but the CC has never worked. After watching your vid I've now seen that the accelerator pedal isn't LVVD, and I have no diagnostic equipment to check if the clutch and break switches are correct. Do you think there's a change seeing as it should already be enabled on the car, if I just switch the parts for the correct parts as listed in the video, that it might start working? Or will I still need the lexia equipment to enable it? The mist frustrating thing is, I'd assume a light would come on the dash but the equipment not work because I've got the wrong parts, but that doesn't seem to work. Could again that be due to it not recognising the wrong parts therefore just not working all together? Any help much appreciated. Cheers

@peugeotCitroen2CV 2 месяца назад

Hi there I am not sure if the xsara picasso supports the speed limiter functionality, so i doubt there is a need to look for the LVVD pedal, but some may have had cruise control. You would still need lexia to enable any of the functions. If you had lexia you could at the very least see if the command is being sent to activate cruise control. Ask on the citroen owners club or a specific xsara picasso one there may be someone who has lexia, its not too expensive to buy from ebay but im not 100% sure about versions anymore as i now use a device which works with all cars so havent really had much cause in the past few years to use my old xp laptop and lexia dongle.

@SzwarcuKX5 3 года назад

I want to do the same to full-mux 406 (Cruise Control only). I activated it in BSI but it still doesn't work. Do I need to reprogram ECU as well?

@peugeotCitroen2CV 3 года назад

Hi, it is not something i ever did to my old 406s as both had cruise control However i do remember the owners club had a great guide on it www.406oc.co.uk/viewtopic.php?t=20756 You will need PP2000 to reprogram the car yes.

@SzwarcuKX5 3 года назад

@@peugeotCitroen2CV Thank you!

@SzwarcuKX5 3 года назад

@Jerrod Dunsing lulw nice bots mate.

@matthewilett6174 2 года назад

Hello thank you for the post. I have done the cruise control part(limiter not required) of the install on my 2008 xtr berlingo, and my mechanic has enabled cruise on the bsi and the ecu, following appropriate steps. I am getting a message on the centre console saying 'cruise control impossible' when trying to activate the cruise control. Is this something you have come across or know how to resolve? Many Thanks Matt

@peugeotCitroen2CV 2 года назад

Hi there I came across a mates berlingo that would not let me change the setting on the ECU, it turned out the version of diagbox i was using was too new and i had to install the older version. Are you seeing the cruise control symbols in the LCD screen within the instrument cluster?

@matthewilett6174 2 года назад

Hi thank you for your reply. I managed to get the cruise control working, as you said it was the version of diagbox that was the issue. I do now have another issue though. I purchased the accelerator pedal for the speed limiter, however the new one has 6 electrical pins, whereas the original only has five, with the plug also accommodating five pins. My cable doesn't have the one with the orange clip. Is there a different pedal available with 5 pins or maybe a 5 pin to 6 pin adapter? Many Thanks Matt

@peugeotCitroen2CV 2 года назад

@@matthewilett6174 Hi there matt There may be different accelerator pedals for different years, do you see the build code sticker on your berlingo? Google Citroen RPO number to see examples of what i am asking, let me know what your RPO number is and i will see what i can find in terms of part numbers. The 5 and 6 pin pedals will not be cross compatible you will need a different pedal to work with your ecu.

@matthewilett6174 2 года назад

Hi Thank you so much for your help by the way I really appreciate it. The RPO number is 11613FV

@garethmcparland7585 10 месяцев назад

Hi does the abs pump need to be changed when retrofitting cruise control to a 2010 Citroen Berlingo multispace xtr.thanks

@shikehowson1 Год назад

A bit off topic but why was the hedgehog out in daylight? 😮

@peugeotCitroen2CV Год назад

I am really not too sure, i watch Allen Millyards videos and he has a night time camera to spot them coming out at night. Its not the first time ive seen a hedgehog at day time.

@eneafantinel422 Год назад

Hello, may I ask why is the accelerator pedal replaced? Definitely explains it but I can't understand, thanks.

@peugeotCitroen2CV Год назад

It is replaced to allow the speed limiter function to work The standard accelerator does not have the indent to bypass the speed limiter, it is replaced with one that has the indent to allow the speed limiter to function

@realcon5086 11 дней назад

So for only cruise control you don't need the accelerator pedal?

@davecrossling8289 3 года назад

Hi, great video. Looking to do this myself as I couldnt get hold of a cruise control version of the XTR. Any links to the cable to connect laptop to OBD2 connector please ? tried ebay and amazon but all I seem to be getting is audi VW ones and not sure they will work.

@peugeotCitroen2CV 3 года назад

Hi, thanks for the comment. It is strange that the XTRs did not all get cruise control, especially when it probably only cost pennies for PSA to add. The cable is called Diagbox, search for it, all the usual websites have plenty of choice.

@davecrossling8289 3 года назад

@@peugeotCitroen2CV Hi, does the ignition need to be on when activating the cruise control in the ECU ? Watched the vid a few times now and you seem to turn it off without metioning turning it on . Hope it makes sence.

@peugeotCitroen2CV 3 года назад

@@davecrossling8289 Hi Dave Yes the ignition generally stays on although you may be prompted at certain times to turn it off and wait a set amount of seconds. It will guide you through that process.

@realcon5086 11 дней назад

what is the software you use?

@peugeotCitroen2CV 8 дней назад

Hi, it was a copy of Diagbox available from ebay.

@realcon5086 6 дней назад

@@peugeotCitroen2CV thx !, windows 7 or 10 what windows do u have?

@peugeotCitroen2CV 6 дней назад

@@realcon5086 Mine is on an old XP laptop Tbh i dont actually know the exact version its on, i bought it from ebay about 5 years ago initially i updated to the newest version on the CD but ended up having to going back a few versions I dont use it as much anymore as i have a tablet that does all cars. Only the odd PSA car now, a few weeks ago it was an early xantia abs fault

@realcon5086 5 дней назад

@@peugeotCitroen2CV thx mate for reply, i installed thw software but doesnt work, it says i need xp or windows 7, gonna try today the virtual windows xp.

@bemarimees Год назад

Can u use Glw pedal?

@michalk5506 3 года назад

Hi, what year of production of the car?

@peugeotCitroen2CV 3 года назад

This one is a 2011, although the B9 was produced from 2008 to 2018

@michalk5506 3 года назад

thank you very much, I have a 2012 van and unfortunately I can not change the cruise control settings in the ecu the engines in Bsi managed without a problem

@peugeotCitroen2CV 3 года назад

@@michalk5506 I had a similar issue. I had someone call round to get their 2012 van cruise control added, but i was unable to do it that day. The issue i believe is that my laptop was running one of the later diagbox updates, apparently it's better to work on an earlier version of diagbox as it will let you into the ECU settings. Is your van running a bosch or siemens/continental ECU? I have installed an earlier version on a seperate laptop but the chap who owns the van has not yet been back to try that out.

@michalk5506 3 года назад

@@peugeotCitroen2CV I do not know what ECU I have, it is my father's car and I will have access only next weekend. My diag is v7.83, I got info that I should have max v7.53, I will try to get it. Thank you very much for the answer

@MrGuvEuroman 3 года назад

What does the speed limiter do?

@peugeotCitroen2CV 3 года назад

It is demonstrated working towards the end of the video. However to put it in writing the speed limiter will prevent the vehicle from going over the set speed. Set it to 30mph driving through a town and it will not accelerate above it. There is a detent in the accelerator pedal so if you push hard on it the vehicle will override the speed limiter which may be required. A downside to this particular system compared to some more modern ones is that it will not use the brakes to maintain the speed, my dad has a 2015 Mercedes C class which will brake the vehicle which is particularly useful if driving downhill. It will also engage the brakes if you turn on the speed limiter, if you engage the speed limiter in this berlingo the speed display will flash until you bring the vehicle down to that speed.

@MrGuvEuroman 3 года назад

@@peugeotCitroen2CV ahh so pedal change is only for speed flash?

@peugeotCitroen2CV 3 года назад

@@MrGuvEuroman Yes if its not changed you can still have just cruise control Although i find myself using the speed limiter much more than the cruise control, but there are plenty out there who do not regard it as necessary

@peugeotCitroen2CV 3 года назад

@@MrGuvEuroman Correct

@MrGuvEuroman 3 года назад

@@peugeotCitroen2CV Thank you this has been a great help, I found the perfect belingo with no cruise I was going to forget it but seeing how easy it is I going to buy it. 😀

@1Dipped Год назад

What is the machine you use to code the car ?

@peugeotCitroen2CV Год назад

Hi there, Diagbox for PSA vehichles, or i use a launch device which works with different cars

@1Dipped Год назад

@@peugeotCitroen2CV you dont have a link to it do you ?

@peugeotCitroen2CV Год назад

@@1Dipped Hi there, not for the launch device i bought it off Facebook marketplace second hand. The Diagbox was off ebay many years ago, lots of them still available now. You may need to join the forums to see what is the best version to get as ive not used the diagbox machine in some time.

@1Dipped Год назад

@@peugeotCitroen2CV hi mate sorry to bother you again so if i just want the cruise control do i still have to change the pedal or do i need to just instal the stalk and get somebody to programme it thanks

@peugeotCitroen2CV Год назад

@@1Dipped for cruise only you don’t need the pedal but still need the setting changed with diagnostic equipment

@Zenoy 3 года назад

What diagnostic program do you use?

@peugeotCitroen2CV 3 года назад

Diagbox, have a look on ebay for it, there is plenty of choices for it.

@Zenoy 3 года назад

We found the setting in bsi and changed it to cruise and speed limit. But in the engine ecu tab i cant find any speed limiter och cruise control to activate 🤔

@peugeotCitroen2CV 3 года назад

@@Zenoy What version of Diagbox are you using?

@Zenoy 3 года назад

@@peugeotCitroen2CV 7.57

@peugeotCitroen2CV 3 года назад

@@Zenoy I think there has been issues with some of the more up to date versions not permitting certain functions. Did you put on the extra updates that the CD had?

@bendover-69247 3 года назад

how does the cruise controller " button" work? are the wires already there for it? didn se u put any wires on it.

@peugeotCitroen2CV 3 года назад

The wires are already there integrated into the com2000 unit, com2000 referring to the combined wiper and indicator stalk unit. It has the terminals already in there to support the cruise control stalk.

@bendover-69247 3 года назад

Thanks. But I just bought the Peugeot planet and are looking for that “cruise control “ you got at 2:40 in the video. But the junkyards are not very easy to get parts from, they need the number on it. Do u know the parts number I need? I have a 2010 Peugeot partner 1.6hdi

@bendover-69247 3 года назад

sry did find it now , 6242 Z8 :)

@peugeotCitroen2CV 3 года назад

@@bendover-69247 6242Z8 oops sorry just seeing you found the part number