Тёмный

Revell 1/32 Messerschmitt Bf 109G6 late-video build 

ScaleModelAircraft
Подписаться 161 тыс.
Просмотров 575 тыс.
50% 1

About the aircraft:
The Bf109 is one of the Luftwaffe's most famous World War II fighter aircraft. More than 33,000 Bf109's were built in many different versions. Both its climbing capability and acceleration in the dive were two of the Bf109s strong points. In production since the summer of 1942, the Bf109G series displayed some noticeable changes compared with the previous Bf109F version. The G-5/G-6 had a MK 151/20 mm cannon firing through the engine. Two MG 131 machine guns were installed above the engine. The belt-feed to the uprated armament necessitated aerodynamic modifications to the engine cowling's which gave the aircraft its characteristic bumps .
The G-6 was used extensively on all fronts from March 1943 until the end of the war. Later production lots of the Bf109 G-6 were given fixed rear cab windows in a one-piece design which vastly improved visibility to the rear. During a further modification the tail was fitted with a rudder that was higher and had a larger area than previous models. With a total of 13000 units, the G-6 was the most widely produced of all Bf109's.
----------------------------NOTE Mar 17,2014 !!! @ Marcos : propellers are placed in the correct position but unfortunately after photo shooting! Sorry about that! ------------------------------------------- with Bf 109G-6 Prop and Spinner set BR32122 Barracuda Studios! (btw Highly Recommended!).
Model:
length 284 mm
wingspan310 mm
number of parts182
- New Mouldings
- Early or later versions can be built
- Detailed Surfaces with recessed Panel Joints
- Detailed Cockpit with Instrument Panel
- Many interior cockpit details
- Separate tail wheel
- Movable propeller
- Detailed Under-carriage bay with side walls
- Detailed Under-carriage
- The option of 2 different Wheel Rims and Tyres
- The option of 2 different Upper Cowling's
- Separate Ailerons and Flaps
- Separate Slats
- Divided Cockpit Canopy with Rear Armour
- A choice of Early or Late Rudders
- The choice to build the Early or Late version Cockpit
- Additional Fuel Tank
Decals for the following versions:
- Hauptmann Franz Dörr, Bf 109 G-6, W.Nr. 411960, Stab III./JG 5, Gossen, May 1945
- Hauptmann Karl Rammelt, Bf 109 G-6, W.Nr. 160717, Stab II./JG 51, Rumania, April 1944.
for more details about the tools, paints please visit www.revell.de/en/home.html
Airbrush: Sparmax SP-35, for more details please visit:
www.sparmaxair.com/
Music copyright by RU-vid Audio Library.
Thanks for watching!
All the best!

Хобби

Опубликовано:

 

14 мар 2014

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 188   
@chs82ndab
@chs82ndab 9 лет назад
What a great tutorial. Am building this G model as I write and this has been such a great help, even for a 59 year old who has been building WWII aircraft since I was 8. Regards
@wakemanedwards3450
@wakemanedwards3450 8 лет назад
+chs82ndab I know what you mean my friend, I am 57 and medically retired and now disabled. I now have lots of time for this wonderful hobby I have loved since I was 10. I am also learning about new products and how to use them, s well as techniques I never knew that are fantastic. I just bought my first airbrush a few months ago and trust me, great results and yes, you can teach an old dog new tricks : ) This channel and a couple of others like it are fantastic, I have learned so much. All the best
@PrivateDoge
@PrivateDoge 8 лет назад
+Wakeman Edwards and i am a 12 Year old that is a complete beginner but already loves it!
@markwilliams974
@markwilliams974 6 лет назад
I got back into it two years ago at age 59. I had been building them off and on since I was 8 as well. Now I'm using an airbrush, acrylic paints, adding weathering, chipping, grease and oil stains, ...the whole bit. There is something challenging about getting the right look. Each kit has its flaws (mine ...not the manufacturer) but they are getting better and better each time.
@wilcoxjames2
@wilcoxjames2 9 лет назад
I have watched this video 3 times, and then ordered the kit. Outstanding paint work! I hope I can do a humble replication.
@AlexModeling
@AlexModeling 10 лет назад
That is The best video build i have ever seen until today... ni e video editing and of course great modeller work.. a stunning piece of art!
@Cabilis66
@Cabilis66 10 лет назад
Fantastic build mate ! Your airbrushing skills are top notch ! Thanks for posting this video :-)
@ModelloursWorkshop
@ModelloursWorkshop 10 лет назад
Very nice video.Looks like a great kit. The result is stunning too :)
@nudzi
@nudzi 10 лет назад
Hi, I just wanted to drop by to say how much I enjoyed watching your build. Very, very nice and entertaining. Nice choice of music, very relaxing :)
@bradsbunker
@bradsbunker 7 лет назад
A really nice build, and nice painting techniques. Great looking 109.
@instirahul
@instirahul 9 лет назад
Freaking brilliant man! Great job!
@Desertduleler_88
@Desertduleler_88 9 лет назад
They make it look simple....Great job.
@TheSeeka
@TheSeeka 8 лет назад
Excellent build guide. Very good and very informative. Big Props!
@Ryker45
@Ryker45 10 лет назад
I have really enjoyed this video, thanks for posting. Thats the first time i have seen anyone spray with enamels and what an excellent job. Thats a fantastic model and video mate.
@wakemanedwards3450
@wakemanedwards3450 9 лет назад
Tools in the hands of an amateur typically produce amateur results. Tools in the hands of a seasoned MASTER such as yourself, produce professional results. It is a pleasure to watch you work. Thanks for sharing your skills.
@JackFlemingFan1
@JackFlemingFan1 9 лет назад
Excellent video & job building your Revell 1/32 Messerschmitt Bf 109G6!!
@Adamslee72
@Adamslee72 10 лет назад
best tutorial i have seen so far and what great subject to choose as well thanks for sharing subbed!! happy modelling :D
@Massimo1975Max
@Massimo1975Max 9 лет назад
Well done Sir. Thanks for all the time and effort you put in to show the rest of the world. amazing work. Well done.
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
Max Vicoli Thank You! You are welcome! All the best! Dusan.
@bobdyer422
@bobdyer422 7 лет назад
Dusan, A blast from the past! Cool! I was working on my 1/32nd Trumpeter 109 G6{early} and this popped up. Great job and you've only gotten better. Congrats!
@ScaleModelAircraft
@ScaleModelAircraft 7 лет назад
Thanks Bob!! Take care and all the best! Dusan.
@theflamingzero3006
@theflamingzero3006 9 лет назад
The Camouflage is beautiful!
@InternationalBritishModeler
@InternationalBritishModeler 10 лет назад
Fabulous video and great end result! Subbed : )
@bathwars
@bathwars 8 лет назад
nice build, I'm thinking of starting one of these soon and your video was very helpful! :)
@kariodim
@kariodim 9 лет назад
Excellent video. Amazing skills.
@juanrios9522
@juanrios9522 7 лет назад
Nice kit, nice build, nice video..thanks for sharing
@mark109s
@mark109s 7 лет назад
Great job, lots of tips! Thanks
@ApriliaRSV4F
@ApriliaRSV4F 6 лет назад
Just came across this. Nice build.
@ScaleModelAircraft
@ScaleModelAircraft 8 лет назад
@B_M_F_710, You are welcome! I recommend gravity feed airbrush, that is my first choice, I also use the siphon feed AB with no problem at all. if You dont have the compressor right now and You are using air can (for example Revell Airbrush Power), gravity feed airbrush is way to go, becouse You can work with ultra low pressure, so the can will last much much longer. And that same Airbrush You will use when You buy compressor. Compressor with air-tank is best option, but You can find a good oil free piston compressor very cheap for start (Gamma/standard). For the brand part, I dont have favorite AB, I am using Sparmax SP-35 in this video build, It is a very good and very cheap airbrush. I also have Iwata, Revell, Richpen, I like them all. So I dont have favorite brand, it is a matter of choice... All the best! Dusan.
@1339LARS
@1339LARS 8 лет назад
+ScaleModelAircraft I use a IWATA compressor you can´t even hear it !!
@mohammedkassab6948
@mohammedkassab6948 8 лет назад
I like your builds man keep up the good work
@MrBioniclefan1
@MrBioniclefan1 10 лет назад
Great video build there
@JeffreyStrader
@JeffreyStrader 7 лет назад
Dusan I wish you put out "Building Technique Videos"............You are truly talented.
@wesmander
@wesmander 9 лет назад
I've just finished this kit , nice model , the only bad thing about it was the random numbering that revel seem to plan their kits with , you spend more time going through
@mikek2130
@mikek2130 9 лет назад
Seriously the best work i have ever seen! Thanks for sharing
@kakosstudio
@kakosstudio 7 лет назад
Well done!
@MAN394631
@MAN394631 6 лет назад
Again you made a perfect model, so awesome, i like your way how to build a model so much, really my taste. Greets from Germany
@georgebrown6540
@georgebrown6540 7 лет назад
Not only is this a great tutorial, it shows how a work of art is created, museum standard stuff in my opinion. As for dislikes, I think if you dislike, its your perogative, but surely a reason should be given. Anyway thanks for sharing.
@ScaleModelAircraft
@ScaleModelAircraft 7 лет назад
George thank You for kind words! All the best! Dusan.
@jakecutter5125
@jakecutter5125 9 лет назад
Hi Ian an excellent build so different to see an Me109 in a different country`s markings. yours Steve.....
@caramel1301
@caramel1301 9 лет назад
whoa I can never make one that good
@MrMikepaniora
@MrMikepaniora 9 лет назад
cool man....nice job
@ianalbi
@ianalbi 9 лет назад
Awesome!!
@highflying82
@highflying82 9 лет назад
Who on earth disliked this nice little tutorial thumbs up
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
jeff nicholls Thanks Jeff! All the best! Dusan.
@highflying82
@highflying82 9 лет назад
No probs dusan keep em comin
@antonrudenham3259
@antonrudenham3259 9 лет назад
jeff nicholls Jealous types,which include me but without the dislike of course.
@miyabe_k195
@miyabe_k195 9 лет назад
what toll is that?? that spary thingo
@paradisdescieux
@paradisdescieux 10 лет назад
very nice work and o good video.
@AlexModeling
@AlexModeling 9 лет назад
Amazing work!!
@jaja1818
@jaja1818 8 лет назад
glad to see revell is stepping up their quality..but trumpeter is already dominating this scale in with their pricing bracket..would have wanted to try this kit though..maybe someday when i have extra cash
@williammann6198
@williammann6198 9 лет назад
Awesome!
@GLUESBROTHERS
@GLUESBROTHERS 9 лет назад
Good video!
@josephlacicero2235
@josephlacicero2235 9 лет назад
very nice. Thanks!
@kaspahrc2200
@kaspahrc2200 8 лет назад
beautiful
@cesarignjas
@cesarignjas 8 лет назад
talking about compressors, i had one without tank and i was realy pissed off trying to do fine detail and it was "pulsing" so i did one tank myself, I went to a pet´s store and bought some aquarium hose and metal conections and valve, so I perforated 2 holes in a 2L soda cap, putted the hoses there, one in coming from the compressor and other out to the airbrush, it take some seconds for the compressor pressurize the bottle but then I can spray with no problems at all, I use the maximum output of 20 psi, don't go further or the improvised system may leek but it was the easyest and cheaper solution y could come along, cheers!
@Guillaumeaviation
@Guillaumeaviation 10 лет назад
very good model !!!
@gino1212g
@gino1212g 10 лет назад
felicidades muy bien explicado
@steveborkowski2125
@steveborkowski2125 8 лет назад
Awesome camo !!!!...
@forcedadventure
@forcedadventure 9 лет назад
THANKS FOR THE GREAT VIDEO !!!
@paperitgel98
@paperitgel98 9 лет назад
great model :D more of these video please, ill subscibe
@wesmander
@wesmander 6 лет назад
I made this , nice kit , only annoying thing about all revell kits is having to look through all the sprues during assembly stages to find the parts you want unlike tamiya, trumpeter etc
@marcelwildeboer
@marcelwildeboer 4 года назад
Like to see more big scale builds.......greet job..
@FABIUSMAXIMUZ
@FABIUSMAXIMUZ 9 лет назад
Estupendo!!!!
@darudesandstorm5372
@darudesandstorm5372 8 лет назад
nice work ☺
@ScaleModelAircraft
@ScaleModelAircraft 8 лет назад
Thanks! All the best! Dusan.
@tomeknazgul2346
@tomeknazgul2346 7 лет назад
Jesteś niesamowity wspaniały film , a może tak zrobisz film z A-10. czekam na następny film.
@lemo_manda6076
@lemo_manda6076 8 лет назад
This video & are so nice .... and bought :D
@Joe8648
@Joe8648 10 лет назад
it is a pretty nice I have built it the only problem I have is with this much fine detail there is no DB engine that comes with the kit.
@wmhsdoor
@wmhsdoor 8 лет назад
Great job and great video, thank you. What airbrush supplies and method do you recommend? Method as in air compressor or air can.. Siphon or gravity feed.. Brands etc, I am new to the hobby.
@tf_infiniti4785
@tf_infiniti4785 9 лет назад
Beautiful masterpiece! I need to know do stores sell ready made planes? How much is it?
@stalker797813
@stalker797813 7 лет назад
бесподобно!!!!!👍👍👍
@osya13able
@osya13able 9 лет назад
Thanks very nice video.What kind airbrush you use?
@ppvpz
@ppvpz 6 лет назад
Hi!! Awesome job!! I have some doubts about airbrushing onto a small table, as you do. How much pressure are you using in the airbrush?? What is the proportion used to dilute the ink?? 50/50?? Thanks a lot!!
@AlexandreKlafke20
@AlexandreKlafke20 9 лет назад
Hi !!! Very nice work ! What is the primer (black) you use in boby frame? acrilic or enamel primer?
@DavidOteroNavarro
@DavidOteroNavarro 8 лет назад
Really nice build! Just a minor detail... Is it me or the propeller blades should be the other way around? Aside from this, great details and I really like the subtile, non over-the-top weathering.
@alexsp7086
@alexsp7086 7 лет назад
did you use the decals for the cockpit or paint that free hand :)
@RetriNoob
@RetriNoob 9 лет назад
I was teared
@alexsteel5959
@alexsteel5959 8 лет назад
Love the back ground music. What band or bands?
@paips4
@paips4 9 лет назад
I agree with Michael Witmann, American Revell kits leave a lot to be desired.
@markcameron360
@markcameron360 9 лет назад
Great demonstration and skilled artist; I think however the propellor blades were glued on back to front - small detail but slightly important on the real aircraft!
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
+Mark Cameron Yes, but please look at the info section ;-) All the best! Dusan.
@Vuhai100
@Vuhai100 7 лет назад
I really like the Messerschmitt Bf 109
@illes.gergely002
@illes.gergely002 10 лет назад
Is this an official Revell video? The finished model really seems to be the same as it is shown on the box. I guess that's why he use only Revell products.
@EvertHarley1
@EvertHarley1 7 лет назад
What music did you use for this clip? nice plane
@blanc087
@blanc087 8 лет назад
are you using enamel paints to airbrush?
@militarymodelling7933
@militarymodelling7933 9 лет назад
Just curious, how did you make the white swirls on the propeller hub? I tried to do it on my own G6 (albeit it being 1/72) and it went horribly wrong!
@1339LARS
@1339LARS 8 лет назад
+MilitaryModelling Just use the decal provided !
@hanscombe72
@hanscombe72 10 лет назад
I would love to see you do the Revell 1/32 Spitfire Mk II.
@AlexModeling
@AlexModeling 9 лет назад
I cant even imagine why 2 guys dont like this video! Probably they r jelous!!
@ApriliaRSV4F
@ApriliaRSV4F 6 лет назад
I know this is an old video now, but I would guess it is because of the voice. I find it annoying, but nothing I would give it a dislike for.
@GBooth
@GBooth 10 лет назад
Great video! I see you using a lot of Revell enamels on the model. Did you use the Revell enamels for the RLM 74/75/76 camouflage, or another brand? A list of materials/brands at the end of the video might be helpful. Beautiful work, though. Thank you!
@ScaleModelAircraft
@ScaleModelAircraft 10 лет назад
I can add a list of colors used in video build?, all colors are from Revell range (Enamel colors and few revell acryl farbe). Thanks for the comments! All the best!
@welshzecorgi7903
@welshzecorgi7903 7 лет назад
What air pressure do you usually use when you airbrush? I've been using about 20 psi, but I don't really know much about airbrushing. Thanks.
@ScaleModelAircraft
@ScaleModelAircraft 7 лет назад
1-2, 1-6 bars Thanks! All the best! Dusan.
@bob12123
@bob12123 8 лет назад
dam i really need to buy an airbrush.good job bythe way.
@slammer7520
@slammer7520 9 лет назад
With what do you thin Revell for airbrushing ?
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
With Revell color mix, also You can use white spirit but I prefer to use original thinner/color mix for Revell paints (enamel). All the best! Dusan.
@lonewolf-qz1vx
@lonewolf-qz1vx 9 лет назад
Hey, guys! I'm kind a rookie here and I have couple questions for you. At first which company should I pick to buy models? Is it AirFix, Italeri, Revell? And what do recommend me to start with (which scale and other?
@abelkersten4319
@abelkersten4319 9 лет назад
I should start with italeri. They make easy kits
@raytheron
@raytheron 7 лет назад
I just came across this. What a lovely build, as always. You're a master, Dusan! Just to satisfy my curiosity: where does the narrating voice come from? I take it it is not your own voice?
@ScaleModelAircraft
@ScaleModelAircraft 7 лет назад
I forgot, I think the program is a E-speak or something like that. I sould check it out for You. All the best! Dusan. btw. Thank You Ray! :-)
@raytheron
@raytheron 7 лет назад
Thanks for that. No need to check, I am satisfied with your answer :-) You are welcome, my friend. Always a pleasure to watch a master craftsman at work!
@huntersuo5130
@huntersuo5130 10 лет назад
How much does that air brush cost
@Blackriver48
@Blackriver48 9 лет назад
hello, how do you attach the small cockpit parts to the wooden stick, i have some issues becaus i am doing my very first model and have everything i need but not the experience ... greetings from germany
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
MoritzM. Hello, I am using blue tack (You can use Patafix-UHU available in Germany). Also regular masking tape can be used for holding the small parts. All the best! Dusan.
@chuckschillingvideos
@chuckschillingvideos 9 лет назад
ScaleModelAircraft Another technique I like to use is to take a stick of sprue, set the tip to melting with a flame, then blow it out and apply the melting blue to the part I want to hold awaay from my hand for painting or whatever. It holds it securely enough, but easily snaps off when want it to. And every modeler has a lot of waste sprue about!
@markwilliams974
@markwilliams974 6 лет назад
I use a dab of modeling clay on the end of a stick, sprue, or Q-tip. Doesn't stain and holds the part well enough to paint it.
@taylorperkins89
@taylorperkins89 10 лет назад
How did you do the spiral design on the spinner? Was it a decal?
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
Yes, Decal, All the best!
@gino1212g
@gino1212g 10 лет назад
Que marca es tu aerografo
@DavidJones-wr3sb
@DavidJones-wr3sb 6 лет назад
got this model for Christmas 3 year's ago. .2013 ....only just started to build it lol ...Christmas 2017 😆
@willcampbell2909
@willcampbell2909 9 лет назад
that is releasing the full potential of revel Germany
@Vuhai100
@Vuhai100 7 лет назад
It's one of my favorite German fighter
@azdave2721
@azdave2721 7 лет назад
Hi, Great build. Why no primer? I always thought it was needed. Best regards..
@ScaleModelAircraft
@ScaleModelAircraft 7 лет назад
With swastikas video will be forbidden in some countries. :-/ All the best! Dusan
@sowa18
@sowa18 7 лет назад
Why have you blurred swastika on the tail? Have you do the same with red star on soviet planes?
@alaric3415
@alaric3415 9 лет назад
Great tutorial, build and detail! The tutorial was very helpful. Why dont you try using a paint brush instead of a air brush sometime?
@wakemanedwards3450
@wakemanedwards3450 8 лет назад
+there siko in town Gaming WHY ? Are you suggesting that an airbrush is cheating? I bet you cannot use a paintbrush and no airbrush and get the kind of results shown here. Why would you suggest this, are you trying to challenge this man's skills??? I'm truly curious why you would request this.
@novailspoesie6097
@novailspoesie6097 8 лет назад
what is the Name of the Music on the end ?
@greenarrowk5930
@greenarrowk5930 8 лет назад
Hi kind sir, great build, as I see, you are using the Revell Enamels for airbrushing, tell me, how do you thin them?
@ScaleModelAircraft
@ScaleModelAircraft 8 лет назад
Thanks! For Revell paints I am using Revell color mix, original thinner. The color mix is 50-50 enamel paint and thinner. All the best! Dusan.
@PrivateDoge
@PrivateDoge 8 лет назад
+ScaleModelAircraft im sorry but is the enamal paint the normal revell paint?
@MrTelecasterIV
@MrTelecasterIV 8 лет назад
Is it possible to paint a model plane properly with a brush? I paint for almost 10 years 28mm mini's (Warhammer etc.) but now i wanna do some WW2 models, the only thing is i don't have a airbrush (because i live in a appartment). Thanks in advance.
@omural
@omural 9 лет назад
It wouldn't be great if you had have shown how to make the white spiral on the propeller cone?
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
Henrique Notam Next time! All the best! Dusan.
@deadviking7156
@deadviking7156 9 лет назад
What spray gun do you use ? One question: How do you get the white stripes that accurate on the spinner ? Did you just taped it with masking tape ?
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
Decal for spinner stripe, but yes you can use strips of masking tape... easy and spray white/black. AB Sparmax SP-35. All the best! Dusan.
@deadviking7156
@deadviking7156 9 лет назад
ScaleModelAircraft What do you think about the Revell spray-guns ? I want to buy a spray gun too. But i also need a compressor.
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
Dead Viking Very very nice, but if You can afford please buy a version with gravity feed! All the best! Dusan.
@GAW912
@GAW912 7 лет назад
Excellent video in a host of others. Where does that voice come from? It's bloody brilliant. Reminds of those cold war era infomercials like the bit sampled in Frankie Goes to Hollywood's Two Tribes. Su-bloody-perb. 👍
@ScaleModelAircraft
@ScaleModelAircraft 7 лет назад
Thanks! All the best! Dusan.
@gollumxonpc5162
@gollumxonpc5162 9 лет назад
What is the stenil called that you painted the wheels with? I need one of those but cant find one
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
Hasegawa Trytool TP-1 Template Set No 1, very handy for scribing and painting. All the best! Dusan.
@gollumxonpc5162
@gollumxonpc5162 9 лет назад
ScaleModelAircraft Thanks a lot, always answering so fast. In what ratio do you use paint to thinner for your airbrush? Also what sanding paper do you use? 600? 480? I tend to scratch the model so i have to paint it multiple times
@ScaleModelAircraft
@ScaleModelAircraft 9 лет назад
gollumxOnPc For 1/48th scale use 800-1000 grade sand p. as a start, for 1/32 scale You can use 600 grit as a start... 1000, 1500.... All the best! Dusan.
@DosGaming101
@DosGaming101 9 лет назад
Revell Germany make very good kits. American Revell, not so much...
@masterphil156
@masterphil156 6 лет назад
40:03 where can i buy this Klear??greets from germany! your Chanel is cool
Далее
FULL VIDEO BUILD REVELL Focke Wulf Fw190 F-8
30:01
Просмотров 602 тыс.
Your bathroom needs this
00:58
Просмотров 17 млн
AlexModelling "Revell 1/32 BF-109 G6 Complete build"
53:40
FULL VIDEO BUILD TAMIYA MESSERSCHMITT Bf109G-6
20:56
Просмотров 472 тыс.
Revell B-1B Lancer 1/48 scale | Full Build Video
1:59:35
Просмотров 116 тыс.
How a P-51 Mustang Works
18:37
Просмотров 8 млн
The Stigler-Brown Incident Animation
8:50
Просмотров 6 млн
🍁 Ты остался незамеченным
0:26