Thanks for the review - this is Mark (the designer at Indigo Lime). Re the pedal clamps - those were designed to fit around the foam but as some users had damaged foam like your rig I have now re-designed the clamps to fit directly onto the metal tube.
Are the redesigned clamps also available for the CSL Elite pedals? I checked the website a few days ago and the clamps for the Clubsport and new CSL pedals seemed to be the new ones (as least the product picture looked like it), but on the page for the CSL Elite pedal clamps it only showed the old ones.
Hi - sorry I didn’t see this earlier - the product was updated - the photos were not (my mistake) they will be corrected soon - and we will include the latest v2 elite pedals
The problem here is that the mounting plate for the wheel has been moved, thus putting the reinforcement bars at the wrong angle resulting in them not being used to they’re full potential. I’m using them on the play seat with Dd pro and they work really well. Obviously some people will need to move the mounting plate depending on they’re unit, but if anyone is thinking of using the Dd pro you don’t need to move the plate. It’s just a simple bit of drilling a few holes for mounting and thinking outside the box.
Wondering if you have this part correct on your Challenge as it should not swing more then normal, check the guide: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LE_wpgsIOvg.html
I am using the DD Pro on my Playseat Challenge with the Indigolime Pro reinforcement and it works good together. The Fanatec V3 pedal clamps are 👍 and also the one on the left side of the handle, especially that one helps with the DD Pro weight/FFB. I did not use the one on the underside if the base plate yet, as I have put the plate the closest to me. For now, loving the reinforcement and loving my DD Pro
Thanks for explaining everything in depth, especially the wheel plate pivot! I didn't understand it's use, but I'm getting it anyways because it's in the bundle
Good thing I watched this video before buying the bundle. As I have been looking to upgrade to load cell in my csl DD pro and also the 8nm boost kit, I dont think the wheel base mount plate or the pedal holder could take those forces so some upgrade is necessary. But the pedal movement issue I have fixed by just taping the pedals into position. I did that with my G29 pedals and now with Fatanec csl pedals and hockey tape has done wonders. I do still have the foam in place and with that the pedals does not move even a millimeter. Hockey tape is durable and grips well, but does not leave ugly stains when removed, so I can really recommend that.
I have the pedal clamps on my tlcm's. They're solid and it doesn't slide up and down at all. I must have the new version. Not sure how long they'll last though. Like you said they're quite thin and I have it at about 80kg of force. So far so good though.
