Review of my new PRESSURE WATER PUMP , powerful MICRO DIAPHRAGM PUMP . 

diaphragm pump can dry run for a long time, no any problem. don't worry!

Yes you need a step down transformer 110 to 12 volt And then a bridge rectifier in order to operate it.

Mine is 3 Amps

Its already inside there

8.5mm

For the chrome screw, i myself is unaware about it,if you got some info on it, do share with me too. For the other issue, mine also does not stop, for that i guess u need to add a pressure switch.

@@SIMPLEHOMEMADEPROJECTS My apologies, the pump in your picture was different from the one I have here..

No, they are already included in the package.

No, it operates on 24 volts DC. Your home supply is of 220 volts AC.

@@SIMPLEHOMEMADEPROJECTS then how can I run this motor

@@dhruvakumarchapala5197 using a 24 volts dc power supply

10 to 12 feet easily

Yes

@@SIMPLEHOMEMADEPROJECTS 👍🏻

Yes

It has a filter inside it, so as u know milk contains little particles. So there will be a blockage. According to me, the answer is no, but you should consult someone other.

Around 2kg's i guess

Yes

Actually its a 24 volt pump and I operated it first on 12 volts and then on 24 volts.

145 psi

@@SIMPLEHOMEMADEPROJECTS Try ~116psi

It is not a submersible pump, means it can not work under water, hope you got the answer.

@@SIMPLEHOMEMADEPROJECTS ok thanks

Hi, if I undertood your question correctly, you are asking wether it will automatically turn off when we put off the equipment attached to it like a tap or a hose. The answer is No, this is just a pump. If you want to make it work like that you need to install an automatic pressure switch with it. You can buy these switches from the market. They are readily avaliable on different online platforms as well.

@@SIMPLEHOMEMADEPROJECTS tnx, saw another video, it has a pressure switch inside.

Iske inlet pr 1 filter hota hai, wo block hojye ga. Polluted water k lye centrifugal pump use kro, jitna zyada polluted hoga, pump k impeller blades utne kam.

Suggest me konsa centrifugal pump sasta, sundar, mazbut rahega?

@@user-ls_xoxo you can purchase the ones used in room air cooler

Can you write in English

يمكن أن يكون لأسباب عديدة. الأول هو وجود بعض جزيئات القمامة الصغيرة بداخله. السبب الثاني يمكن أن يكون محمل المحرك أو جزء مكسور داخل جسم المحرك. إذا كانت لديك بعض المهارات الفنية، أقترح عليك فتح المضخة باستخدام مفك البراغي والتحقق بنفسك من مكان المشكلة. وسوف تضيف إلى معرفتك كذلك. إذا كنت بحاجة إلى أي مساعدة إضافية فأنا هنا.

@@SIMPLEHOMEMADEPROJECTS شكرا على الرد لقد فتحت المضخة ولكن لايوجد كسر ، كل شيء جديد ، ولايوجد كسر ولا أوساخ ، لايوجد إنسداد ، المحرك يعمل ويدور ولكن لايسحب الماء ، لقد وضعت الماء في اتجاه الصحيح( السحب ) ؟؟؟

@@mohamedahmed-th2xr أستطيع أن أفهم اللغة الإنجليزية، واستخدمت مترجم جوجل لفهم ما تقوله. لا أستطيع أن أفهم تعليقك الثاني. لكنني فهمت إلى حد ما أنك فتحته وكان هناك شيء مكسور بداخله. الآن ما هي المشكلة، هل يمكنك التوضيح؟

You are right, but i dont have a gauge, sorry for that

@@SIMPLEHOMEMADEPROJECTS I've been considering one of these pumps. No video online seems to show these with a PSI gauge connected. For good reason I'm sure. I suppose it may have its uses, but high pressure is not one of them.