[Review] RadioMaster MT12 - Surface Transmitter with EdgeTX 

They can't "directly" connect to the protocols of other version. However there are modules that you can install on the transmitter. Look at 8:26 . If you get the ELRS version and want to use other receivers from Flysky, Radiolink, etc. You can install a multiprotocol module on the top. Vise versa, if you get the 4-in-1 and want to use ELRS receiver, you can install a ELRS module on it. Basically choose the version according to what you use the most. If you have a lot of old receivers and cars with all-in-one (eg. WLtoys, Mini-Z) just go with the 4-in-1. Then add a module if you need extra protocol(s) later.

Will take a look into it and see if I can get one.

Thanks. I'll find a chance to test the Radiolink with telemetry in serial mode. As far as I notice, it's the same latency as a native Radiolink transmitter but I'll need to test it just to be sure. Still, this one offers way more customization than RC8X.

if you want to go elrs, you can always add a module... the one from jumper brand is cheap.

Unfortunately, the 4-in-1 does not contain ASF. As I mentioned at 9:06 you will need the old ASF module and hook it up then choose the PWM mode to operate the ASF receiver.

DSM2 surface is still not available on 4-in-1, only DSMR at the moment. So I think ELRS would be better because it'll give you more performance and range.

@@BeaversHobby thanks for the reply.. more power to your channel.

@@leomarloedicang419 My pleasure.

Anything that can't be programmed via S.BUS is OK. Power HD also makes really good gyros. The Power HD G1 has very good noise and vibration filtering that I don't see the wheel shake on RWD drift so it should be good for keeping the car in straight line too.

Thank you so much for your input

Yes, it works with WLtoys K9x9 and 284xxx. The 4-in-1 multiprotocol will work directly, the ELRS will need a multiprotocol module. I'll make a video or 2 because there's one for the old K9x9 and one for the new 284x series.

Thank you. Just watched the video.

No, please don't! Rocket 18A (sensorless version) is one of the worst you can get. There's DasMikro V3 and PN Racing that are around the same price and way better than Rocket 18A.

@@BeaversHobby Great, thank you. Should I be careful of the heat ?

@@frkial8649 Don't worry about the heat on the ESC. Some motors heat up a bit but it's nothing dangerous.

For pistol grip transmitter RadioMaster MT12 is the only choice. If you are OK with stick radio then RadioMaster TX16S, in my opinion, is the best because of the big touch screen.

@@BeaversHobby Radiolink RC6GS has port for elrs module or RC8X also better port for elrs module the radiomaster built in elrs module is a joke 600-700m and you need to buy a better module for longer range so the price is radiomaster is high not worth it overall

@@PoloHungary When you run it on PPM it's the same port on both RC6GS and 8X so there's no difference in the connection. If you need more advanced adjustment the 8X is obviously better. You run elrs for range, I assume?

@@PoloHungary To be honest I'm not so sure RC6GS would work with ELRS module because it only output PPM from the trainer jack. If the module can work off PPM alone then it'll work. If it needs full crossfire system then I'm afraid it won't work.

as all opentx/edgetx radios, it just plays wav files from the microSD card