Тёмный

Revival of a $1000 KX250 from Start to Finish 

Kincade Pavich
Подписаться 114 тыс.
Просмотров 308 тыс.
50% 1

I partnered with DupliColor for this project! Check out DupliColor products here: www.duplicolor.com/
Here are the specific DupliColor products I used for this project:
Prep Spray: qr.page/g/LFzwoxzHWv
Self-Etching Primer: qr.page/g/2ey4S9qmFDs
High-Performance Wheel Coating and Matte Clear Coat: qr.page/g/4vFVtjh9tMp
Acrylic Enamel and ClearCoat: qr.page/g/38edI4LQZsq
#ad #sponsored #duplicolorpartner
I bought a KX250 for $1000 a few months ago. This is the complete process I went through to bring it back to life from start to finish!
Instagram: / kincadepavich
TikTok: / kincadepavich
Support the channel by bookmarking this affiliate link to make your purchases on Rocky Mountain: www.rockymountainatvmc.com/?r...
This bike is kitted with brand new plastics from MX Plastics. Use the code “MXP10” for 10% off your next order: www.decalmx.com/productListin...
Along with custom graphics and a custom seat cover from DeCal Works: decalworks.com
Pryme MX products are essential for any bike build. I earn a small commission when you purchase Pryme products through this link: prymemx.com/?ref=kincade
This bike shines thanks to new hardware from Fast Metric: fastmetricfasteners.com
This bike is kitted with Pro X parts throughout: www.pro-x.com/
This bike is sure to grip thanks to some brand new tires from Shinko: shinkotireusa.com
Stuck Nutz is a new thread locker company dedicated to keeping trails and riding areas accessible. I support what they stand for and you should too! Save 10% on your order using the code "KP10": stuck-nutz.com/
First beat is "Daydream" by Chandler Bouldin
The remainder of the music is from Epidemic Sound:
Going for the Best by Daniel Fridell
So Long Comet by Coma Svensson
The Last Kiss by Ritchie Everett
Emily by Ritchie Everett
Just a Little Bit by Chris Shards
Summer Flirt by Autohacker
Starfields by Hallman
The Morgue by Cushy

Авто/Мото

Опубликовано:

 

27 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 295   
@grantduininck6238
@grantduininck6238 11 месяцев назад
6% + 1 individual enjoyed that shot. Commenting on Jani's behalf
@lassekirketerp2837
@lassekirketerp2837 4 месяца назад
+1
@nicholasdamico8009
@nicholasdamico8009 Месяц назад
+2
@Mike_B_724
@Mike_B_724 11 месяцев назад
All my fears about buying a used bike, all rolled into one video 😄 Great job on the rebuild.
@KincadePavich
@KincadePavich 11 месяцев назад
Hahah thank you!
@holymacarenafin2319
@holymacarenafin2319 4 месяца назад
Haha i buy used bikes with intention to open then up straight away. While checking If it run good but mostly i check shocks and lingages. Those are good i take it. Never trusting someones hours on piston storys.
@bve7397
@bve7397 9 месяцев назад
He has the garage, the body and the brains! Love you dude, hoping to be doing projects as such on my own someday, sadly deals arent as good around here.
@SkillCollectors
@SkillCollectors 11 месяцев назад
Man that glass/sandpaper re-surfacing trick is money.
@dylansmith6364
@dylansmith6364 2 месяца назад
Smooth counter tops work good too!
@jacobEstammel
@jacobEstammel 20 дней назад
finally !!!!!!!!!!!!!! a sand blaster
@motomatt3763
@motomatt3763 11 месяцев назад
That CR is definitely an old crusty deamon of the dirt.... Looking forward to what you make out of it. KX is dope!
@KincadePavich
@KincadePavich 11 месяцев назад
Thank you!
@codycegla6065
@codycegla6065 11 месяцев назад
I'm auto tech and I appreciate the great workmanship that you do and the videos that you put out. Have ever thought doing what to look for video when buying a used bike?
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks a lot! Truthfully I haven't really, I feel like there's good content available for that, but I may take it into consideration!
@Cartduckmann
@Cartduckmann 11 месяцев назад
You should! It’s great to hear different opinions!
@MultiDragola
@MultiDragola 7 месяцев назад
​@@KincadePavichyeah I'd rather you focus more on in depth rebuild stuff like transmission/engine work along with electrical.
@notthat1130
@notthat1130 4 месяца назад
@@KincadePavich I highly request this video, im currently looking for a trail bike and a project bike . I’ve been watching your videos along with some others, trying to educate myself on how to work on bikes. Myself and Im sure many more would highly appreciate a video talking about what to look for when shopping for used bikes . I’ve seemed to find a lot for a good price that say they run good but how do I know I’m not gonna run into issues like these such as previous mechanics making non beneficial add ons/repairs. Great videos keep it up!!
@damxn7345
@damxn7345 11 месяцев назад
21:26 some people may not agree with me on this but when im working with stuck hardware on the vice i smack the vice handle with the mallet or sledge gets those seized bolts every time
@sombatone
@sombatone 10 месяцев назад
This was absolutely awesome and best work done... the bike looks so amazing
@jacap1sr
@jacap1sr 3 месяца назад
Let's just replace everything while we're at it. I applaud you.
@tristanc150
@tristanc150 11 месяцев назад
I love your restoring videos!
@KincadePavich
@KincadePavich 11 месяцев назад
Thank you!
@dethamselv5482
@dethamselv5482 11 месяцев назад
Great to see some ones project is going nicely along. My fram and engine just fell down after i painted so i’ll be starting alllll over again
@matthewmansfield2384
@matthewmansfield2384 10 месяцев назад
We've had a few '02 KX's. That year is really the best of all from '97-'06 - best motor character for sure. A "must do" however, is to put '03 triple clamps on it. Makes it a whole new bike that can actually turn with the front. A friend who was a race mechanic gave us all the goods on making KX's haul, so we implemented a few of his suggestions with great results...
@user-ke3ud2ew1h
@user-ke3ud2ew1h 11 месяцев назад
Rad!!! Happy to see you use the old style plastics for this kx. I would definitely race this bike!!
@whatisaray
@whatisaray 11 месяцев назад
Best part of the video is removing the kickstart lever 😂 good work I wish I would have documented my build like this.
@KincadePavich
@KincadePavich 11 месяцев назад
Took so long hahaha! Thank you!
@PsGamer-fz8uw
@PsGamer-fz8uw 8 месяцев назад
Absolutely stunning
@batonchik25
@batonchik25 7 месяцев назад
Such a great pleasure watching your videos! you've made an Awesome Job man
@corbinolsen12
@corbinolsen12 11 месяцев назад
Watched each individual video on this build and gotta say the full build video was just as awesome. Liked the commentary through out on this one. Looking forward to the next project! Honda 😮
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks so much for following along!
@shannonjurgens3667
@shannonjurgens3667 9 месяцев назад
Yup! The project that is too big to fail! You did the right thing. You upped the resale value.
@memorris2
@memorris2 10 месяцев назад
Bro, i had a 96 xr600r that was street legal when i bought it in 2015, and 90% of the spokes wouldnt tighten or loosen. I was broke at the time so i just rode it anyway. The rear wheel ended up exploding, cracking the wheel and luckily i was only going about 10mph in a turn. Lowsided and even with jeans on my entire shin was skinless! Always check old wheels and spokes!!!!
@memorris2
@memorris2 10 месяцев назад
It actually might have been a 93 xr600r now that im thinking about it haha
@tomatoknuckles
@tomatoknuckles 11 месяцев назад
Even tho I watched every episode, i enjoyed watching this again. You're a good dude and you have a great eye for making bikes look great. God help you with that CR tho that's proper roached, haha. Look forward to the build.
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks so much I appreciate your support and comments!
@KingFriday274
@KingFriday274 6 месяцев назад
Wow. Inspired to go wrench now. Great work
@Grunzaa
@Grunzaa 9 месяцев назад
Love the bench grinder on the outdoor glass table 🤣🤣
@Dirt_Breaker
@Dirt_Breaker 4 месяца назад
Pro tip, when resurfacing a cylinder try to go in an infinity symbol type pattern to avoid shaving too much off from one side, as you’ll find your fingers might weigh down one side more than the other. Also, make sure to regularly clean your sand paper, the shavings can build up and glaze the surface, reducing the bite on the gasket. Love the rebuild, not to much or to little!
@07murdoc28
@07murdoc28 11 месяцев назад
That is one 10/10 bike for sure!
@rossilake218
@rossilake218 7 месяцев назад
Hi, Use 1/4" to 3/8" green tempered shelf glass. Make sure is is on a perfectly flat surface. I use an old counter top. You need copper jaws on your vice. I'll make a pair for you. I have that (20) vice/s..Great job on the rebuilds. I'm 62, Hobby machinist. I'm looking for a Cr250r late model. I had 3 and sold all of them, back in the day. Urrgh! Serb or croat? Redbud is our track.
@Newmanrides
@Newmanrides 22 дня назад
Love this build ❤
@Alfoy57
@Alfoy57 4 месяца назад
I really enjoy watching your videos.
@KadeTurner
@KadeTurner 11 месяцев назад
Really good video mate, lot of work gone into it. Makes me miss my 250. Wish I never sold it.
@alessandro519
@alessandro519 11 месяцев назад
Awesome job!
@brettlaage9687
@brettlaage9687 11 месяцев назад
Man that thing looks amazing! I can’t wait for the CR. I’m building a 2002 CR125 right now.
@KincadePavich
@KincadePavich 11 месяцев назад
Awesome, and thank you!!
@jz64
@jz64 Месяц назад
Great job the bike looks beautiful
@kenweis7913
@kenweis7913 10 месяцев назад
That takes serious commitment
@richardstewart5095
@richardstewart5095 9 месяцев назад
Awesome stuff!
@ChadJorgenson
@ChadJorgenson 6 месяцев назад
Some nice tips and tricks I'm going to use on my '00 KX250 ... though I actually love the raw aluminum color of the wheels, I hate the black on my new bike. 😀Love that case sticker, I'll be grabbing one of those for sure.
@martyross1573
@martyross1573 11 месяцев назад
Can't wait for the CR. The black looks mean :)
@Sissypool
@Sissypool 9 месяцев назад
I'm a 4-stroke guy (mainly because of the sound and power) but, I love Dirtbikes, none the less. I loved this video. It's a skill I wish I could do and love watching any who does.
@graememilne4202
@graememilne4202 11 месяцев назад
That kx looks like a new bike,well done on that job. Cant wait to see the CR gettin done,looks like a lot of work needed there but your the man.
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks a ton! Stoked to tackle the CR!
@graememilne4202
@graememilne4202 11 месяцев назад
@@KincadePavich Cool,got 1987 CR250 im just about to get stuck into as well. You got a good thing going on here,please keep it up,you only have to read a few comments to see how much folks are enjoying them. :)
@Adjust-Fire-jy3dy
@Adjust-Fire-jy3dy 3 месяца назад
I have to say this is about what to expect every time you buy a used 2 stroke. I have done it many times. The fact that I love doing it doesn't justify it in my wife's eyes though. Lol.
@user-rw1cg8yi7l
@user-rw1cg8yi7l 11 месяцев назад
I love your restoration bike😊
@spiritofogun5583
@spiritofogun5583 9 месяцев назад
Excellent work bro
@sakisSAVAGER
@sakisSAVAGER 11 месяцев назад
I love your work brother!!! Keep it up
@KincadePavich
@KincadePavich 11 месяцев назад
Thank you!
@vincentwobb9919
@vincentwobb9919 5 месяцев назад
If you ever have to cut a sleeve or even a bearing off, cut it with a die grinder but don’t go all the way through, then take a cold chisel to your cut and it’ll usually split along that cut and won’t damage the shaft, I use this all the time at work.
@WOLFEY0812
@WOLFEY0812 10 месяцев назад
Great job bro 👍
@DirectoutdoorsTV
@DirectoutdoorsTV 7 месяцев назад
Buddys jacked
@martyross1573
@martyross1573 11 месяцев назад
Good videos. Keep them coming
@ODRoach
@ODRoach 11 месяцев назад
always RAD my dude! Keep it up
@KincadePavich
@KincadePavich 11 месяцев назад
Appreciate it!
@SimonQuennevilleSim
@SimonQuennevilleSim 10 месяцев назад
killed it
@tomrotella6273
@tomrotella6273 11 месяцев назад
Really enjoy watching your videos. Great insight for when I finally get a bike lol 😂.
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks a ton!
@tunahtuckkingrichard8052
@tunahtuckkingrichard8052 9 месяцев назад
Great job.
@ryanharriss7950
@ryanharriss7950 6 месяцев назад
That tyre remover is pretty good.
@Tmoney423
@Tmoney423 11 месяцев назад
Sick!🤘
@sexatica
@sexatica 9 месяцев назад
great music in the video. Very satisfying
@KincadePavich
@KincadePavich 9 месяцев назад
Glad you liked it!
@brianhuman2218
@brianhuman2218 11 месяцев назад
Loved this series man! 🔥
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks for following along!
@brianhuman2218
@brianhuman2218 11 месяцев назад
@@KincadePavich can't wait for the next one
@UTP_ENT
@UTP_ENT 2 дня назад
What’s your fitness routine ? “Disassembling old dirt bikes”
@Menniti_129
@Menniti_129 11 месяцев назад
im excited for the honda i know your gonna build a sweet bike!
@KincadePavich
@KincadePavich 11 месяцев назад
Thank you!
@nuthintoprove
@nuthintoprove 10 месяцев назад
Every time I buy a used bike I plan on at least what you did? Nothing here surprised me!
@CNNECTCTRAL81
@CNNECTCTRAL81 9 месяцев назад
My dad owned the same KX when I was a little kid, you got me inspired to something similiar :D
@shaqfryz6481
@shaqfryz6481 11 месяцев назад
Gotta see this thing rip buddy !
@KincadePavich
@KincadePavich 11 месяцев назад
Vid just went live!
@upsideways
@upsideways 6 месяцев назад
New subscriber here. Loved this clean-up. Looks amazing
@tebow3068
@tebow3068 7 месяцев назад
I just bought a 94' kx250, i have a similar isuue with the top end because the walls have been worn down so ill have to get a whole new big bore kit otherwise it'll keep burning up my oil
@Rhutt258
@Rhutt258 9 месяцев назад
Insane
@jcrr1972
@jcrr1972 9 месяцев назад
I wish I have the time, tools and knowledge to this, great job!!!, wonder what the original owner is thinking now.
@chasebenzing7824
@chasebenzing7824 11 месяцев назад
Man, love the bike, just rebuilt my ktm250, nice job!!
@KincadePavich
@KincadePavich 11 месяцев назад
Awesome! And thank you!
@2stroketyson79
@2stroketyson79 10 месяцев назад
you can use a PVC pipe for the steering stem bearing too
@joelboutier1736
@joelboutier1736 5 месяцев назад
beautiful bike. sometimes the cheapest bikes are the most expensive
@friguy4444
@friguy4444 7 месяцев назад
Wow dude!! You've got a Hockey net??!! MAN!!
@KincadePavich
@KincadePavich 7 месяцев назад
I play adult league hockey here!
@sickunit2096
@sickunit2096 2 месяца назад
Ive used that very same shop vac extension to drive MTB fork bearing races 😂
@jimmyjohnson2827
@jimmyjohnson2827 10 месяцев назад
That music on the engine teardown lol
@Ridefastorgetpassed
@Ridefastorgetpassed 6 месяцев назад
Next time prepack those stem bearings with a bearing packer then tap em on. I also wipe a little grease in the cup/race.
@gtgodbear6320
@gtgodbear6320 3 месяца назад
I've been hoping I could find a cheap 85cc to restore. Honda, Yamaha or Kawasaki. They have always been my favorite size.
@IAmPiernik
@IAmPiernik Месяц назад
Girls, 7:20 You're welcome! Love it 😂😂🥵
@lawrencefranck9417
@lawrencefranck9417 11 месяцев назад
Try penetrating oil. Liquid wrench makes good stuff that will dissolve rust almost instantly. I use aerokroil if I can get it.
@josephsworld1886
@josephsworld1886 9 месяцев назад
Love the number you chose. (406) That’s my race number. 😂😂
@joshellis6801
@joshellis6801 11 месяцев назад
Your videos are so good
@KincadePavich
@KincadePavich 11 месяцев назад
Thank you!
@MegaQLDER
@MegaQLDER 6 месяцев назад
U had me at kx 2 stroke. But the shot of the rig?, haha😂
@XxGhostR3c0nsxX
@XxGhostR3c0nsxX 10 месяцев назад
That Baby is Sweet!!!
@jameschapa5111
@jameschapa5111 3 месяца назад
nice work However noticed when you put grease on stem bearings You should watch a video on packing hub type bearings You will be surprised on how much grease they use.
@40mmmikemike
@40mmmikemike 9 месяцев назад
Theres always some valuable information in these videos for people who like to work on things. I was thinking it might have been better finding a brand new coil instead of that old one for that price.
@Ernbern124
@Ernbern124 11 месяцев назад
damn next project is clapped out.... Please keep that shred decal or re do it. Looks badass.
@KincadePavich
@KincadePavich 11 месяцев назад
Hmmm... Will consider... :)
@kenweis7913
@kenweis7913 10 месяцев назад
I love shinko tires for the price and performance
@michaeltyris3249
@michaeltyris3249 3 месяца назад
I think you need to invest in an ultrasonic cleaner for your carbon stuff or anything else engine wise tbh, easy and gets into every single nook and granny!
@Camaron9769
@Camaron9769 11 месяцев назад
man this makes me miss my 2013 yz250.... shoulda never sold it
@KincadePavich
@KincadePavich 11 месяцев назад
There's always another one
@grudzien9784
@grudzien9784 9 месяцев назад
I don’t know about you, but the clips I think are the hardest to install lol. The 65 sx I did it took me forever to get the in correctly. Not to mention I lost those little clips at least 10 times and had to look for em. So frustrating
@augieh6146
@augieh6146 9 месяцев назад
Those Kawasaki Japan stickers mean something bro. If you know you know. That was probably a serious racers bike back in it’s hay day if it’s sporting that sticker on the shock
@KincadePavich
@KincadePavich 9 месяцев назад
Interesting!
@diegoignacio10
@diegoignacio10 11 месяцев назад
Nice! 🤙
@fatbongripz4207
@fatbongripz4207 9 месяцев назад
looks like that axle nut hasn't been greased in a very long time. i do it every time i change the tire, i thought that was common knowledge. i have the 4 stroke version ('05 250f) i abused it heavily when i was a teenager. would love to buy new parts for it but parts are getting hard to find
@Big__Ry
@Big__Ry 6 месяцев назад
Great video 😂😂
@Niobium23
@Niobium23 10 месяцев назад
Awesome! Hahahaha, spoke removal is sexy, I’ve always said that.
@microsoftteams2663
@microsoftteams2663 6 месяцев назад
I have NEVER seen rusty bearings like that>>>>>>>>>>>>> Whhhoooooo!
@marafade13
@marafade13 5 месяцев назад
Music choice for the assembly ❤
@nathancorlett9895
@nathancorlett9895 9 месяцев назад
Great vid m8 what was the total money spent on bike thanks
@Altie8
@Altie8 Месяц назад
i learn s0 much
@no-namecrown5510
@no-namecrown5510 10 месяцев назад
I have a 96 KX 250 and I'm looking to replace the OEM triple clamps with aftermarket billet. I'm in Australia and can't find a supplier. Any USA suggestions? You guy's have the best products.
@ginos5081
@ginos5081 5 месяцев назад
how did you biy the piston without knowing the cylinder diameter? simply took the same size as the one that the bike came with?
@lorenzohuerta8701
@lorenzohuerta8701 11 месяцев назад
Man as someone who would literally kill to own a dirtbike i love watching ur restoration videos learning the ins and the outs of them one dayy ill be fixing up my own 🤞🏼
@lorenzohuerta8701
@lorenzohuerta8701 11 месяцев назад
@@Message-M6 wait is this real
@KincadePavich
@KincadePavich 11 месяцев назад
Thanks a ton, I believe you will! And I see you response - no, I will never notify anyone of a bike giveaway via RU-vid comments. You gotta be careful of scammers!
@lorenzohuerta8701
@lorenzohuerta8701 11 месяцев назад
@@KincadePavich yea i kinda figured got really excited but figured it was too good to be true 😂😔
@rockman49er
@rockman49er 7 месяцев назад
This is an awesome bike a couple years newer than mine 😀 is that monterrey California 😮
@KincadePavich
@KincadePavich 7 месяцев назад
No sir this is Montana haha
@cbh148
@cbh148 11 месяцев назад
Today I learned I liked smooth jazz. Who'd've thunk.
@scottashton6533
@scottashton6533 4 месяца назад
What kind of grips are those and do you like them
@A.shetler72
@A.shetler72 11 месяцев назад
Dream bike rigjt there
Далее
This Revived $1000 KX250 RIPS!
6:35
Просмотров 15 тыс.
Что за обновление в Tanks Blitz?
1:19:16
ЖДУЛИ | 2 СЕЗОН | 4 ВЫПУСК
1:01:52
Просмотров 440 тыс.
KICHKINTOYDAN KATTA JAVOB 😂👍
00:54
Просмотров 355 тыс.
I Have Unfinished Business With This 100 Hour KTM 350
19:48
2011 Kawasaki KX250F Part 1 Ep72
1:08:33
Просмотров 8 тыс.
Must Know Dirt Bike Hacks and Tips!
38:47
Просмотров 350 тыс.
Jaw-Dropping Dirt Bike Restoration | 1995 KX250
30:02
Can I Fix This $1000 RM125 That Won't Shift?
19:20
Просмотров 288 тыс.