No video :(

Revo RPM True Track Install-Upgraded Suspension Arms-No Toe Links

Подписаться 1,1 тыс.

Просмотров 28 тыс.

50% 1

Get it HERE: amzn.to/2ww7D6Z
The Traxxas ERevo brushless is pretty awesome, and upgraded suspension arms really help the truck. However, even with the RPM upgraded suspension arms there is still a weak link-the toe links. When you crash/spin/cartwheel the toe link rod ends get pulled out and you have to swap them out. Not a huge deal, but it'll slow down your fun when you're bashing or at the track. The RPM True Track suspenion arms are a complete rear upgrade for any of the Traxxas Revo trucks.
The package includes new arms, knuckle/bearing carriers and all other parts needed for install. Make sure to set aside about 45 minutes to get these installed.
Once installed, you'll have RPM arms (available in multiple colors too) and best of all NO MORE TOE LINKS OR ROD ENDS that can fail and end your day early.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@macmccartney5760 4 месяца назад

Just got a 2.0 glad i clicked on this video

@iceplanetchris2052 4 года назад

you make amazing videos. keep up the great work

@Hirthirthirt 3 года назад

what springs and shocks are these, Sir......looks amazing

@nagnanai 2 года назад

Hi! Did you experience any problems with the rear driveshafts popping out after installing these ?

@megaben 3 года назад

These are only for the rear right?

@refreshmob 7 лет назад

I read the I shouldn't use the long rocker with the true track suspension

@continuecrushingrc3653 7 лет назад

hmm, I'm not sure? But I did just pull up the RPM site, and it did say that.

@_Otaku-kt8be 2 года назад

What's the difference between the extended and non extended rear arms?

@caneronsmith8964 4 года назад

can you use these with the rest of the stock parts instead of buying other things ?

@BigWillieFPV 5 лет назад

What deg camber did you set I found the ball didn’t screw in far enough for the recommended 1 deg

@RCPropaganda 6 лет назад

this on a 2.0 revo?

@continuecrushingrc3653 6 лет назад

Like the new-new one lol? This Revo was a 2016 or 2017 model. I think the new one might have different arms...

@kennyperson6844 5 лет назад

It fits but the axle carrier bearing are to small for the new axles 😤

@ecoboostrules9795 4 года назад

Can you use these with the stock axle shafts, or do you need to get the CV shafts??

@lukeprattsolderbrother 5 лет назад

Where do u get the metal thing that screws into the top a arm?

@juanjosemondragon9838 3 года назад

Hi I love the video and the explanation. This kit works for Erevo 2.0 ? Thanks

@Sqwidwood 2 года назад

i’m not sure because the new revo is wider or it’s probably just the new tires that makes it look a lot wider idk

@nrgskillmedia 5 лет назад

it's almost a year, how the kit did? did the pivot balls popped out or did it give any other issue?

@olds97lss 5 лет назад

I've been running RPM arms/carriers on the front and truetrack on the rear of all 3 of my revos (2 nitro, one ERBEv1) for many years. The pillow balls pop out if you use P2 or P1 rockers and have the rod ends in the tallest hole on the arm. If you use the middle or lowest, they only pop out on really bad landings. If it's 70F+ outside, I usually just push them back in, otherwise you have to remove the wheel/cap nut/pivot ball and reinstall it. I never tried LT rockers, but odds are, they would cause them to pop out a lot as well due to the extended articulation they allow.