Тёмный

Rewind a Primary Ignition Coil **AUDIO FIXED** 

Dustin Rogers
Подписаться 14 тыс.
Просмотров 17 тыс.
50% 1

This video was originally published June 30, 2015. I sped up the video while editing, but my software at the time didn't allow for audio pitch correction. I've received a lot of comments complaining about the audio so I finally got around to fixing it. Unfortunately, I can't replace the original video, I had to upload a copy of it. This is the same exact video, only the audio pitch has been corrected. If you want to watch the original video - it can be found here: • Video
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
I show how I rewind a damaged primary ignition coil on a vintage mini bike to regain spark. These parts are getting harder to find, but I was able to make this repair with materials that I had on hand. The supplies to rewind your own source coil can be had for under $10 from most electronic suppliers (Radio Shack, Mouser, Newark, etc).
The wire I used was 23 AWG magnet wire 🔗 amzn.to/2myZT2d
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
If this helped you out and you'd like to show your appreciation, donations are accepted :
💲 www.paypal.com...

Опубликовано:

 

29 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 21   
@ogreunderbridge5204
@ogreunderbridge5204 6 месяцев назад
I have kind of a similar problem. I have an old "no new parts to be had" single cyl system, My breaker point is history so I figure my only shot left without buying lathe work will be CDI or HEI module and trigger point, but that is taken I can get a charge from somewhere to power it. I need to rewind my coils to deliver a healthy charge of 12 volts, the more Amps the better. Do you know the coil resistance value to generate 12-14,7 volts ? Do you know how much input voltage overshoot typical moped/motorcycle voltage regulators usually can take before they fry ?
@shawnomack3927
@shawnomack3927 2 года назад
Thanks for this video. These old Kawasaki coils are super hard to find, great to know that re-winding them isn't impossible to do.
@marco-h7x3o
@marco-h7x3o 13 часов назад
looks like a hitachi magneto, same as yamaha
@VashStarwind
@VashStarwind Год назад
Just wanna know if i understand the process correctly. So the red wire is soldered to one end of the copper wire, then you wrap the copper wire around the coil, and then the black wire is soldered to the other end of the copper wire after its all wrapped? Also was the super glue that you kept putting on the wire every now and then?
@DustinRogersinMO
@DustinRogersinMO Год назад
That’s correct. It’s just a continuous coil of wire that will create some current when it passes by a magnet via induction. The super glue was just to keep the windings in place in the event that I accidentally released tension while winding it.
@VashStarwind
@VashStarwind Год назад
@@DustinRogersinMO Ok cool tyvm
@jeremys7066
@jeremys7066 3 месяца назад
Is the coil still working? How did you figure out which direction to wrap the wire or does it matter?
@DustinRogersinMO
@DustinRogersinMO 3 месяца назад
Still working great. Wrap direction shouldn’t matter, but as you’re stripping the old windings off, pay attention to the direction they were wrapped and where the winding started/stopped.
@caseycarrier323
@caseycarrier323 2 года назад
Would you be interested in wrapping 2 of these for my Yamaha outboard i have pictures the parts are hard to find
@fredymredy
@fredymredy 5 месяцев назад
How do i know how many turns i need and how i will know how much current it can output? I want to rewind a coil for my tomos A3 1981year.
@DustinRogersinMO
@DustinRogersinMO 5 месяцев назад
I just did the approximate same number of turns as the original and tried matching the same resistance value as the original spec. There may be some calculation that will get you a ballpark idea of number of turns necessary but that’s a bit out of my wheelhouse. Some of it will depend on the iron core size/thickness and the gauge of wire that is used.
@fredymredy
@fredymredy 5 месяцев назад
@@DustinRogersinMO i've seen on google that you can calculate numbers of turns on transformer by a formula with dimensions of the core + the voltage you want to get/put in but i dont think its the same for a generator.. the coil that i need to rewind is for powering the headlight/stoplight and horn on my tomos moped.
@mrmichael555
@mrmichael555 Год назад
This is a very helpful video, thank you! I have a 1974 Yamaha ty250 with a lighting coil which appears to be bad. I’ll be doing a little more troubleshooting, but I’ll most likely be rewinding it.
@victoryfirst2878
@victoryfirst2878 Год назад
Thank you for the education of winding coils Dustin. I like using the plastic tube for the holder part. Very good idea Sir. Good day and peace too. vf
@shitheadtitwank
@shitheadtitwank 2 года назад
Awesome, just got a 1978 Yamaha YZ 125 that needs new/replacement magneto coils. Of course they’re made from unobtanium so this vid is my next step forward 👍
@rocket99dan
@rocket99dan 2 года назад
Do you have any info on the automotive coil that you got the replacement wire from?
@DustinRogersinMO
@DustinRogersinMO 2 года назад
No idea what it came out of, but you can order magnet wire in whatever gauge you need
@donaldolin7219
@donaldolin7219 Год назад
Nice Fukien job!
@kienoankien192
@kienoankien192 2 года назад
How many millimeters of copper wire are you using?
@DustinRogersinMO
@DustinRogersinMO 2 года назад
No idea. I did as close to the same number of wraps as the original.
Далее
Motorcycle Coil Testing: The Basics
22:13
Просмотров 314 тыс.
Трудности СГОРЕВШЕЙ BMW M4!
49:41
Просмотров 1,6 млн
pumpkins #shorts
00:39
Просмотров 14 млн
1994 kx250 died - diy stator coil rewind specs and tips
11:30
HOW TO REWIND A BRIGGS IGNITION COIL (part 2)
15:21
Просмотров 7 тыс.
Measuring ignition coil primary resistance
10:48
Просмотров 111 тыс.
Lawn mower Ignition Coil - This is what FAILS in them!
32:47
Ignition coil explained
13:06
Просмотров 9 тыс.
Motorcycle Electrical Problems : Easy Fix To Save Money
13:37
Moped Ignition System Upgrade! (IT CHANGES EVERYTHING)
15:09