RGB Rocklight Install - How Do They Compare to My DIY LED Setup? 

Auxbeam RGB Lights: amzn.to/2ucGt5o Extension wires: amzn.to/2JgSDyP

Sweet upgrade. The red makes the jeep look badassssss

Great video! Color options are always fun to have

I did a similar light. I found it easier to use self tapping screws than the bolts in the kit.

go team rugged. also bought these and love them they hold up to all the water and mud I put them through!

I can’t wait see them out on the trails.

Love the red 🔥

You do a great job with your videos....Instead of self tapping screws you should consider rivnuts….they work awesome and come in a variety of sizes....When you install JCR rock sliders you have to use some fairly large ones, but they have small ones for this application too.

Nice video, thanks for the review

Looks good!

Another great video

Enjoy your channel! Thank you

Steinjagar tube doors! I worked for them for a while 😅 drove their semi truck to jeep shows

It turned out well but you could have mounted the control module in the center of the Jeep this gives you 11ft from center of the vehicle which you could have done the rear bumper lights as you wanted just need to splice and shrink the wire to run power to the front . Keep up the good work nice video

Thanks for comparison and instructions! How do you get that Jeep So Clean ??!?

Recently bought my first ever JK and love it. FYI I've watched like 3 of your vids today alone. Lol Your awesome bro ФИΞLФVΞ

I believe they do sell extension cables if you want to mount them further away

Enjoying your videos, Just purchased my 3rd wrangler 87 YJ, 04 Rubicon, now a 2017 Rubicon. Bought it with lift, winch and 35” tires. Looking for a few more things for it. How are the rock lights working out? Any burn out or get caught on rocks? Thanks for serving your country Navy veteran 79-85 Thanks

Sweet setup man. I just got a set of these and they work amazing. May I ask where you mounted you’re control box exactly?

So I just did this on my jeep. I mounted the controller under the center console inside the Jeep and had all the wires come out through the e-brake cable so this way I would have enough wire coming from every light to go wherever I want on the Jeep and just extended the wires from my controller to my battery

Awesome job thank you. 2 questions. 2014 JKU. If adding extension wires, would you add 3? One for back bumper and one for each rear wheel well. Second question, you mounted the controller inside engine bay against fire wall? Thank you!

So cool

Love rock lights. Was thinking of getting some RGB ones installed for style. I started with 4 KC Cyclones, now I have 18 installed.. when I hit the trail its like day time lol! Good video bro!

I had some mic tuning lights on my jeep, they lasted like 2 months, I had my green led go out and one of my pods actually broke off

Just wondering how the lights are holding up. Was looking at a 8 pod set for my jku.

Awesome. I don’t have this kit...I am running the Lux Lights on my JKU and even though they are very bright I have found that 6 lights per side (front, rear, wheel wells, and one under each door) work well. Maybe 2 of the 6 light kits would solve your not enough cable and more side light issues. One control box on the left and one control box on the right. What’s also nice about the Lux Lights...no drilling, they’re magnetic. Makes it easier to move the light for those night repairs. Enjoy your videos!!! Keep ‘em coming.

Awesome.

It might sound lame but it think it would be pretty cool inside the cab as well.

Cool, I like the way those RGBs throw the light, colors might be cool for camping.

Man those are frickin awesome, im definitely going to get a set of those. How are they holding up after time on the trails?

Could you tell me what kind of fuse you used?

Any ideas where to order this now? Amazon says it is unavailable. Any recommendations on a different set if this one is not sold currently?

Great vid! Can you tell me the lift and size tires you went with?

Another great video! I have the KC-Hilite rgb rock lights. I haven't installed them yet. They look very similar and work the same way. Do you know if you can turn them on and off with a switch panel instead of using a phone?

does wiring directly to battery kill your battery? Or only when they are turned on thru the app? So if you turn off on the app, they do not kill battery?

Go Team Rugged!

1). all lights combined what's the amps? I believe the s switches have a max 30 amp per switch on the base unit (I'm not sure but I think the 4x4spod is 30 amp max per switch, with 100 amp max per unit). I would want to hook this up to that and use one switch for all of them. 2). Is there a trigger option? I would want them to come on when I unlock the doors and when I want to turn them on to see something.

I got a similar setup and added a rocker switch. When i turn it off and on its back to where it was before I switched it off.

Hey Ben. Where did you mount your rear light?

What size fuse did you use?

Dang it this says it is currently unavailable! I have Oracle Rock lights on my 18 JL Wrangler. I do not like them because the red bluetooth light on each one makes the lights off colored!

Hey Ben, how have these held up for you? Bought a set of these about a week ago, and they worked perfect for the first 2 days and then stopped connecting to the bluetooth. I really liked them, and just assumed it might have been a problem with my particular set, so probably going to return and order a new set, but want to see if it's worth it. Thanks in advance!

Might be able to mount the controller under the dash and get the original kit cable length to reach back bumper???

Just watched your video. I saw some bad reviews about the app. Was wondering have you had any issues with that.

GO TEAM RUGGED!!

What if you splice and extend the wire to reach the rear?

Could I theoretically set them to the color I want and hard wire it to a switch instead of doing it through the phone?

Nice job, thanks for sharing 😊✌🏆

They make extension for the rgb rock lights I had to get em so my 8 pce lights would fit on my 2002 Jeep grand Cherokee

Thanks for the video. Just got mine and look forward to the install.

So you did one on each wheel well, under each rocker, and under the front. Where is the 8th one?

I want this...Go Team Rugged

Go team Rugged!!

Where did you get the inline fuse?

Are they still working for you? Lots of bad reviews they stop working after a very short time.

Do u have a video for ur diy led setup

How many amps is your fuse?

Go team rugged!

When I click on link says error when redirected. Tring to order but no luck. Do u have a differnt link?

I'm just now seeing this video. Are these still available anywhere? Your link shows it's no longer available on Amazon.

Go Team Rugged!!!

Hey Man, I am assuming you put the control box in the right-hand side of your engine compartment? near your Battery?

So if they stay powered on if you disconnect the bluetooth, I guess you could run them through an sPod type panel and utilize a switch? Then be done with the phone unless you wanted to change colors?

Go team rugged!!

I can't wait for one year durability test review

What amp fuse did you use for the online fuse holder?

Website or materials do not clearly state, is the Computer module waterproof? I would like to put module under truck but unsure thx

That's wonderful. I love it.

Go team Rugged

I have a question thats off topic. Do you know how to fix an oil pressure Sensor?

For the inline fuse, would a 15a be ok so I dont have any issues?

Bruh..... those are sick. Wonder how insane spread I would get with 8lights on my 2dr ?

You don’t “need” a fuse, just better to have one right?

cool

Has anyone used a y-cable and added few more light???

Hey how is the app that you have to use to control the lights? Because I’m a little skeptical about not having a remote.

GO TEAM RUGGED!

Go team rugged😋

GO TEAM RUGGED

What’s the app called?? Or there website ??

Man.. Those are going to ROCK the mall parking lots! I know you ACTUALLY wheel your Jeep but you're not starting to swing towards the tuner crowd are you?

How many beers does a project like this require?

Go TEAM RUGGED!!!!!!!!!!!!!

Should've show where you mounted the control box. I appreciate your videos.

I want to see the video on the diy lights man

Add more wire for distance

Go Team Rugged

I'd keep both. So bright

are they water proof?

how in gods green earth did you get yours that bright, mine that aren’t bright at all

Go team rugged

Self Tappers So Much Easier Thats What I Did !!!

Go team rugged OIIIIIIIO

Go team rugged.

go team rugged

🇺🇸 Thanks brother and I do not have to pay with this video and I can do it charged me 400 to install 🇪🇸 Gracias hermano ya no tengo que pagar con este video y lo puedo hacer me cobraban 400 por instalaro que pagar con este video y lo puedo hacer me cobraban 400 por instalaro

So you don't know how to extend your wiring ? Bummer.

Enter me in the giveaway

Go Team Rugged!

Go team rugged!