Road to the Rockies Ep5 - Someone call 911!

Volvo TP 21 and Volvo TPV | Radiopersonterrängbil 915 “Suggan” | Arsenalen Swedish Tankmuseum

Федункив против брака Харламова 😳 #ComedyClub #КамедиКлаб #Батрутдинов #ГарикХарламов #тнт #свадьба

World‘s Strongest Man VS Apple

Comedy Club: Телефонные мошенники | Тимур Батрутдинов, Демис Карибидис @ComedyClubRussia

Indoor plant care hacks for plant lovers 🌿 #shorts #planting #garden #diy #indoor

Road to the Rockies Ep4 - Big Volvo Energy

Scale Builder's Guild

Подписаться 99 тыс.

Просмотров 15 тыс.

50% 1

Видео Поделиться Скачать Добавить в

We're doing it again! Josh from ‪@HarleyDesignsInc‬ and myself are competing in the Rocky Mountain Regionals hosted by ‪@TEAMGARAGEHACK‬ this coming June, 2023! Watch as I start to make my own carbon fiber body panels for the C1 Dakar Porsche!
Learn about 3D printing pens: • A Different Way to Ass...
My C1 is still a mystery chassis/electronics. But it's a Carbon Fiber Porsche, so that's cool.
C2 is the new Axial SCX10Pro: bit.ly/3myHTVK
Reefs Smart 1100 Servo: bit.ly/3dNbiar
Reefs 800 is Winch: bit.ly/34IMf4c
Sugga File (will need much effort to make printable): www.cgtrader.c...
My C3 as it stands: Groundfox Element based chassis: www.artfuldodg...
Element RC kit: bit.ly/3aHKoPI
Vanquish VXT2 tires: bit.ly/3DuQBKr
Holmes Hobbies: bit.ly/3HrjlFf
Proline Cliffhanger: bit.ly/3YaA5Hp
More info on the event: : events.eventzi...
Our merch is super cool: teespring.com/...
#sorrca
#scalerccrawler
#ilearnedsomethingtoday
#scalebuildersguild
Winter 2022 Stickers are SOLD OUT!
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuilde...
► Merch available here:
teespring.com/...
I shoot all my videos on the Sony a7c and a6500 in 4K, with Sigma 16mm, Tamron 28-70 and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
MB01ZVU6VVLO0ZL

Опубликовано:

11 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 218

@rcmakingtracks18 Год назад

That Volvo's looks are jaw dropping. Man that's one cool looking truck. Great video, great job Matt. John

@scalebuildersguild Год назад

Thanks John!

@EZCheezyBeef Год назад

You may make things a little easier by wetting the fiber first?. Just a suggestion . It's the way we do it at the boatyard. Also kind of surprised that you guys have not tried petroleum jelly as a release agent. More lessons from the boatyard.

@AUBREYTHOMAS1979 Год назад

What are you wetting it with?

@EZCheezyBeef Год назад

@@AUBREYTHOMAS1979 The epoxy/polyester resin.

@scalebuildersguild Год назад

Thanks for the tips, Mr. Boat Man!

@bluegroovemodelsports9650 Год назад

@Scale Builder's Guild I somewhat agree with him. For more detail. Lay newspapers taped down beside your work area. Then pour some Resin on paper. Squeegee it out with a bondo spreader . Lay your cloth down poor little more resin. Squeegee the resin until you get a nice even coat . Then pull it up and set it in mold work it around with your brush. Also brush light coat of resin in mold first .

@mikebird8290 Год назад

Hi Matt thanks for posting Another GREAT video. Take care Sir hope the week is treating you well and u have a great weekend 🇬🇧🇨🇦🕊️✌🏼🤩❤️ RC

@scalebuildersguild Год назад

Thanks for watching and have a great weekend too!

@ashleyconnelley1856 Год назад

Damn that thing looks sick AF.

@outcastrc8052 Год назад

Most excellent Matt! My gulliver is chuffed by all the wonderful things that are coming off your bench!!! What a great inspiration to all of us to step out into the deep and expand our skill sets in the build side of this hobby!!! Marvelous! Looking forward to how you will adorn your carbon fiber body with a livery to match the brilliance of the weave design.

@scalebuildersguild Год назад

Stay tuned and thanks for watching!

@nuge74 Год назад

Progress is coming along great, excellent! There’s a neat feeling of self-satisfaction knowing that a one off build from the ground up is literally the only one in the world, good stuff!

@scalebuildersguild Год назад

So true! Thanks for watching!

@blammers Год назад

Love the dig at Josh's sponsorship

@Rokstardad82 Год назад

The chair has to be included somehow in the next sticker sheet lol. That class 1 is going to be insane !

@thomasbialzik3060 Год назад

An entire 'chair'-themed build, perhaps

@sdkokIkg Год назад

I'd love some chair stickers for my k5

@PeterCPRail8748 Год назад

Both builds are going to look sick!!!!

@scalebuildersguild Год назад

Thanks!

@LRCR Год назад

Very Nice Carbon Fiber Work on the Porsche, The Printed Body is Coming along very well, I have 0 experience with 3d print although years ago I was a lead person in a CAD department... I'm thinking about it?.. Look's like maybe a RTR chassis might be needed to save time, but which one.. Vanquish Phoenix NP? Just a thought 🤩 😊 ✌🤠👍 Having Fun Laughing Playing and RCing 🙏 Stay Safe and Play Healthy Matthew

@scalebuildersguild Год назад

I think the Vanquish is a great RTR to start with. With your past experience, you have a headstart at trying 3D printing. Go for it and good luck!

@NaturallyRC Год назад

Call me weird, but this is imo one of your best RU-vids ever. You managed to pass on a ton of really useful, and unique information I have yet to see elsewhere. Fast-paced, informative, and fun too. A real home run. Thanks for sharing.

@scalebuildersguild Год назад

Wow! Thanks so much!

@michaelmcclung957 Год назад

The carbon fiber...absolutely stunning! Great work josh!

@scalebuildersguild Год назад

Ummmm... it's Matt.

@brandaneakright6082 Год назад

They’re both looking really good, keep up the great work.

@scalebuildersguild Год назад

Thanks, will do!

@michaelkeefer1471 Год назад

I'd like to hear some more about that chair, please. It looks built for sitting on. Have a great day.

@thejeepinrealtor5742 Год назад

That looks absolutely fabulous. 😍

@scalebuildersguild Год назад

Thanks so much! 😊

@thejeepinrealtor5742 Год назад

@@scalebuildersguild thank you! Appreciate all the content you provide. :)

@johnoneal1999 Год назад

While I do like the look of Josh's parts, I really love yours. That attention to detail to make the weaves go in the same direction is awesome!! Also, the way you're doing your body panels, you are more able to keep the same thickness for each panel relatively the same for the whole body because you know how many layers you've put in it.

@scalebuildersguild Год назад

Thank you!

@paulmcnamara2908 Год назад

So need to see that Carbon Porker body come together! Both will look awesome! 😁👌

@swizale Год назад

That carbon weave came out sweet.

@scalebuildersguild Год назад

Thank you! Cheers!

@IowaBudgetRCBashers Год назад

The Volvo sugga was made from 38-58 and was designed as a taxi, but was used during ww2 as a military vehicle and was also used as a family vehicle for families that lived in the snowy mountains.

@scalebuildersguild Год назад

Thanks for the info!

@tomhiers9025 Год назад

Can't wait to see it run

@jonlaird5082 Год назад

Can't wait to see what both builds will look like once finished. Both look awesome already

@scalebuildersguild Год назад

Thanks! Stay tuned!

@rcbloke1766 Год назад

There looking awesome Matt keep up the great work.

@scalebuildersguild Год назад

Thanks!

@CustomRcCanada Год назад

Wow that print pen trick is nice. It reminds me of automobile bumper repair. If you get S shaped elements on a small induction gun/pen, you could melt those two part together before filling up. Also I think that while the pla is still hot you could easily use a small tool to smooth it out right away for less sanding

@TVsGringoStarr Год назад

That Volvo looks amazing. I can't wait to see how it turns out.

@scalebuildersguild Год назад

Stay tuned!

@kwkride Год назад

Good progress so far. I’m really liking the Volvo build. It has me thinking that a Chrysler Airflow would make a good crawler body.

@travisyork3915 Год назад

Somebody needs to print some chop tops for the power wagon.😊

@edwardbroyles9738 Год назад

I don't have the funds for 3D printing, yet, but there is a relatively cheap process that can serve the purpose of filling body lines or cracks. I actually saw this on the "EVERARD JUNCTION" channel. If you have done any sanding - save the dust and mix it with gel super glue. It works like bondo for full size vehicles. It cures hard as a rock and can be sanded. If you are careful there's no pin holes and the color will match the panel you are reparing. I've used this and been able to forgo finish painting. Just sanded down to 3000 grit and done. At least for bodies that had a weathered appearance

@scalebuildersguild Год назад

Pretty neat. I use the styrene dust to make my own styrene filler!

@ratzosrealm2786 Год назад

The Sugga looks great. First time I saw one was at the Motorama show in Toronto about 5 years ago.

@jeff2633 Год назад

Both are interesting and impressive projects (as usual). Really liking the originality the bodies add.

@scalebuildersguild Год назад

Thank you!

@tlheingrunst Год назад

The "Armadillo" is coming along nicely! Class 1 will be a show stopper!

@christophermears7738 Год назад

Man that Volvo body is killing it . Even in the gray filament plastic color the truck looks menacing

@scalebuildersguild Год назад

Thanks!

@billyquist9237 Год назад

Another awesome job Matt! 👏

@robbinthehood94 Год назад

Best chair sponser in the gizame!

@Basshertz13 Год назад

Great episode can’t wait to see more really enjoying all the awesome work.

@kts8806 Год назад

Love me a RUMPY rear end!! LOL

@onereed333 Год назад

Lmao. Your intro almost killed me, laughing. Keep it up. ..... UNION STEEL!

@scalebuildersguild Год назад

Thanks!

@skinanbonesOG Год назад

first 3d printed body was used at Berkely Scale Adventure park many years ago. I still have it sitting over my desk. I was very surprised at how little damage it took on that 8 hour run.

@J33P4D00R Год назад

I started small with a 3d printed 1963 Jeep J20 Gladiator for my scx24 gladiator. Old school new body. Still working it out but I'm trying to keep a full depth bed and a partial depth interior. I still need motor and steering parts before I want to solidify how I am mounting the body. One of many projects floating around. Just glad I'm on no real time line!

@scalebuildersguild Год назад

Very cool!

@cookeemon67 Год назад

sugga is looking great! excited to see it in person here in colorado! i have 3d printed a body, a 80's dodge ram pick up. still a work in progress but one day it'll see the trail. thanks again for another great video Matt!

@scalebuildersguild Год назад

Thanks for watching and see you in Colorado!

@ChrisKnowlesTube Год назад

I use 3D printing for truck interiors and have a little tip you may like for seating. Once you’ve 3D printed your seat and you have a figure that you’d like to sit in it you can mark around the figure on the seat. Then heat up the area where the figure is going sit with be of those blue flame burner lighters. Use enough heat to soften the whole are where the figure will sit. Try to even heat the whole area, you’ll see the PLA go glossy. To much and it will begin to strand, you don’t want that. Once it’s all soft sit your figure on the heated seat and push down and hold it in place in its driving position. It will take 1-2 mins for it to cool. Lift the figure out. You’ll then have the seat contoured to the figure, this works really will with those bench seats you find in trucks. It looks way more scale as the figure has sunken into the seat. Then just paint it to your liking. I hope that helps someone :)

@scalebuildersguild Год назад

Fun tip! Thanks!

@1darnright19 Год назад

I’ve ordered one James’ 3D printed products from Shapeways a while back. It was the Sand Rail kit one would use with a donor Tamiya Wild One kit.

@RIdeWerksInc Год назад

The carbon lay out on the class 1 is stunning but I have to say .. dang you Matt... that class 2 body and tire and wheel combo is so freaking cool looking and can't wait to see it done... guess I have to buy a Prusa now and build one. Buck Dandy for president

@scalebuildersguild Год назад

Thanks!

@BlindGuyRc Год назад

Union steel. That's high quality steel. These are coming out so good. The 911 is going to be awesome. What's the interior going to be.... yes I know... I have to wait. I love that volvo, and love the way its sits on the scx10 pro. I guess I'll have to buy a 3d printing pen now to lol.... hahaha. Great video man.

@scalebuildersguild Год назад

Thanks for watching! I love that you answered your own question!

@davebutler4959 Год назад

Nice work, I am interested to see how the Volvo body turns out it looks great!

@jimkrug2586 Год назад

I'm blown away by how much work you guys are doing to make these carbon fibre Porsche bodies! I'm also blown away by that sweet chair made of union steel. Way nicer than that piece of crap chair Josh is trying to peddle!! 😂

@grimreaper3769 Год назад

thats a good looking volvo you got there matt. i just finished a rat rod I 3d printed for a body and built off, and posted build pic's on SBG forum. I have used a thin layer of epoxy resin to coat inside of the body and then you can sand it down to take high spots out to paint but i also drilled and epoxied brass rods in between body sections .

@scalebuildersguild Год назад

So cool! Thanks for sharing to the forum!

@kayagon Год назад

I really like the Volvo body.

@overdosed51 Год назад

Definitely interested to see how your carbon fiber inlay supports you 3d printed body. May be the move for lexan basher body's in the future.🤞

@liamRC5487 Год назад

Hi great video. I do that with my lean shells. But use self adhesive felt

@sofakingscalerc4656 Год назад

I printed an Impala body, it took awhile to print because its so long. I worry more about the sun warping stuff than fragility of the print. I'm curious if you've ever printed with HIPS? It's high impact polystyrene, maybe MEK will work with it. I also wanna see you attempt making a 7 inch man with that 3d pen lol.

@Poizdrc Год назад

I suggest really really roughing up the plastic b4 applying the carbon cloth. The resin doesnt adhere very well to smooth plastic. I did this to some flat fenders on a NB JK and even with super scuffing over time tried to lift. You may remember the rig from the 2013 east coast scale challenge. You were my judge on one of the C2 courses. You pointed out my steering angle on a particular part of the course where others struggled. Good times that.😅

@scalebuildersguild Год назад

Good thing printed bodies are inherently rough! I’ll still give it a good scuff though! I remember that truck! Good times back then!

@JTsCustom Год назад

3d printer is great for testing out different chassis for the scx24 before buying one already out and test fitting to see if it's going to work with your setup

@ashleyconnelley1856 Год назад

Oh man I like I like

@edsadventures3575 Год назад

You definitely have a lot of patience for that…. I would normally have patience to try technical things like what you have done, but I never have the time… Love the vids and like the new bodies!

@scalebuildersguild Год назад

It definitely takes a lot of time. Thanks for watching!

@thomasbialzik3060 Год назад

SCALEGASM!

@scalebuildersguild Год назад

Thanks!

@HoundStuff Год назад

That Volvo! 👍

@3gearrc Год назад

Killer work! I am currently working on a 1/18 3d printed body design, i should hopefully be able to get around to printing it this weekend!

@scalebuildersguild Год назад

Thanks and good luck with the print!

@kennethrobinson9008 Год назад

Man! You and Josh are next level! I give up. ;)

@scalebuildersguild Год назад

Don't give up!

@UrsusArctos8 Год назад

Nice! Will the Rocky Mountain regional even happen? We've had so much moister this Spring that the conditions will be wet if not snowy. UGH

@scalebuildersguild Год назад

As far as I know! My flight is booked, so I really hope it happens!

@adventuregenks Год назад

Nice rig bro ❤

@scalebuildersguild Год назад

Thanks!

@sheldonpace2051 Год назад

That looks awesome I’m a big fan of 3d printed RC body’s all my sons and mine scx24s are custom body’s from scale cj5 to super crawler jeeps just now started to print body’s for our 10th scale’s love watching your videos keep up the good work!

@scalebuildersguild Год назад

Thanks for watching!

@freddieflanders Год назад

At least with that volvo you can get 4 seat interior and interior cage points ! I designed and printed an rc Land Rover body which ive used at varies rc events in the uk and its held up pretty well, only the wheel arches have obtained chips from the rocks.

@scalebuildersguild Год назад

Very cool! Thanks for sharing!

@alanq64 Год назад

It's got cobbafibah here and cobbafibah here and dis is cobbafibah here. Cobbafibah everywhere.

@tomhiers9025 Год назад

I need one of those for my slash four-wheel-drive man that would be so cool

@HobbyEntropy Год назад

Typical SBG video: can't hear Matt during the resin pouring, and ASMR during sanding! 😂 Both vehicles coming along nicely, and I will be severely tempted to try these techniques in the future!

@scalebuildersguild Год назад

Glad you enjoyed!

@AllenAHat Год назад

Best intro yet. 😀

@scalebuildersguild Год назад

Thanks!

@AllenAHat Год назад

@@scalebuildersguild you are quite welcome. Looking forward to tonight's live stream and seeing how the builds end up. Do you know of anyone that has done a Scania L10 from the mid 40's?

@scalebuildersguild Год назад

@@AllenAHat hmmm, that one doesn’t sound familiar, at least to me. Give it a go!

@corksauve4949 Год назад

I've 3D printed several bodies. I design and model my own bodies (from pictures and actual measurements). I also print wheels bumpers racks and roll cages. And they come out pretty cool. I use a formlabs form 2 so all my bodies are resin printed. But the formlabs printers have a wide range of engineering resins to choose from. So, I have some pretty tough stuff. I'd love to send you some pictures. for your viewing pleasure or amusement. LOL

@scalebuildersguild Год назад

Post them on the SBG forum!

@tomhiers9025 Год назад

Holy hasenpfeffer man that thing is very cool

@scalebuildersguild Год назад

Thanks!

@DarthCrumbie Год назад

I know im late to the party on this video... But an even better way to fill AND glue/weld the 3D printed parts together and fill in the gaps is to use a variable temp soldering iron and filament. Dont use CA glue. Just line up your parts, hold them in place with tape, and tack them together with a knife blade style soldering tip. Then go back and fill in both sides of the joint with filament. You're essentially welding the 2 pieces together to become one.. no more worrying about the body being fragile. No need to reinforce with carbon fibre. The joint actually become stronger than the rest of the printed body.

@scalebuildersguild Год назад

Thanks for the tip. I’ve done plastic welding in the past, but never to join a body. The CF was intentional all along to add another layer of protection. Thanks for watching!

@tuckerduke6239 Год назад

I printed a scx6 sized 1972 k20 body, with full interior, engine bay, and underside including the exhaust and leaf springs.

@scalebuildersguild Год назад

Very cool!

@tuckerduke6239 Год назад

@@scalebuildersguild its got a 28 inch wheelbase or thereabouts

@fatfreddiescat9952 Год назад

Oh I have that same chair, loverly looks pain on the butt though

@boldrbangr9834 Год назад

Love the Volvo!

@scalebuildersguild Год назад

Thanks!

@fredhenschel3000 Год назад

I really dig the Volvo !!! I was a Volvo parts mgr for a lot of years and really liked the brand and the history 👍🏻

@scalebuildersguild Год назад

Very cool! Thanks for watching!

@gibsonlife573 Год назад

This is amazing dude you're doing a damn good job like where do you get that stuff to do that light bars the sheets of carbon fiber the glue stuff like that I know you have to have a printer to build your motives but this would be like awesome for a lot of people to do

@scalebuildersguild Год назад

A place called Easy Composites Carrie’s everything you might need to get started in carbon fibre! Thanks for watching!

@FearNothing321 Год назад

In regards to priming of a 3D printed body could you use something like a Mr. Hobby surface leveling primer instead of the resin trick?

@scalebuildersguild Год назад

No amount of high fill primer will clean up the print lines and keep the body lines. I've tried it a number of times and am always disappointed by the detail it omits. I much prefer resin smoothing.

@nicholasstephey8475 Год назад

Love the Volvo

@toddbertram6556 Год назад

It would be interesting for you to do a body with no carbon fiber and just used clear epoxy or colored epoxy whatever floats your boat. And a poxy body would hold up just fine to whatever you threw at it in a crawling event

@paulbeckwith5981 Год назад

Really enjoying this series of videos, will the Porsche body ever be available to 3d print please?

@scalebuildersguild Год назад

Nope, sorry. You can buy the CGTrader file and modify like we did though!

@trex450heli Год назад

I’ve build several 3D printed cars (3dsets) and a few rc ships. I have a Disney Nautilus on the printer now. Most of the time I use ABS+ Since it it way beter in warmer climates and my attic.

@scalebuildersguild Год назад

Very cool!

@maxkayser4609 Год назад

That SCX10 looks awesome with that Volvo Body. Is there maybe a Possibility to get my Hands on the finished (as You have it in the Video) STL-File for 3D Printing?

@scalebuildersguild Год назад

Not without paying for it and contacting Josh I’m afraid.

@maxkayser4609 Год назад

I would pay for it of course. I'll contact Him. Thank You

@richysrc2158 Год назад

Would you be willing to share the stl for that body ? I absolutely love it

@scalebuildersguild Год назад

I shared the file in the previous video, but it’s not an STL, you’ll need to make modifications in order to print it.

@tonyspencer4379 Год назад

CARBON FIBER IT 😂

@scalebuildersguild Год назад

Thank you!

@forrestcrabbe Год назад

The volvo looks tuff, i like it a lot. The 3d pen hack is a great idea. Are you using epoxy resin to stick the porsche together? 🤘y'all have a badass day🤘🥞🤘

@scalebuildersguild Год назад

When we start, we’ll be using a product called “panel bond”. It’s used in the automotive sector. Thanks for watching 🤘

@forrestcrabbe Год назад

@Scale Builder's Guild yeah man 🤘🥞🤘

@vidjo22 Год назад

Did Harley send you some of his chip brushes!? Sharing is Caring

@just-in-time6069 Год назад

I would love to see you build some hot rod body and chassis u put them on trucks u need to try a car or old 30s t- bucket truck or car keep up great work and have a great day.

@scalebuildersguild Год назад

Thanks for watching! Have a great day too!

@Papa_Shorty Год назад

Out of all the techniques you shared I couldn’t get my mind off of the 3d pen. Do you think it can be used to replicate a weld seam? If possible, what scale? I hope the question is clear.

@scalebuildersguild Год назад

Absolutely! 9th or 10th scale easily!

@neildaniels5443 Год назад

Looking good Matt ,so much better than lazy Josh's attempt 😂😂 you really are building that Porsche from ya heart .

@scalebuildersguild Год назад

Thank you!

@akoshorvath-risko5838 Год назад

Great video! I have a question though. If I would like to paint a hardbody, when do I sand it? Before the primer goes on, and after the primer? And, what "roughness" sandpaper should I use? Thanks in advance!

@scalebuildersguild Год назад

A light scuff with 1000 grit before primer is all you need, if at all.

@akoshorvath-risko5838 Год назад

@@scalebuildersguild Thanks! I'm thinking of starting with painting!

@khimbittle7705 Год назад

Nice video, maybe u could add a link for the filament pen

@scalebuildersguild Год назад

There are dozens on Amazon and all very similar. Mine is from Geetech.

@adamtebben9512 Год назад

Kick a$$ chair you got there Matt! Do you have a discount code so that I can get a good deal on one??? Lmao

@robbinthehood94 Год назад

Maybe line the inside of the class one with lexan? 🙃

@longtalltexanrc3358 Год назад

Both are coming along great. How much does the Porsche fender and hood body panels weigh at the moment? Just trying to put my mind around the weight.

@scalebuildersguild Год назад

54 grams!

@longtalltexanrc3358 Год назад

@@scalebuildersguild pretty dang light!

@scalebuildersguild Год назад

@@longtalltexanrc3358 yep, and that’s one of the main attractions to using this material!

@quintonwilliams4730 Год назад

The lowered F-150 hurts my eyes. 3D printing my first body now I think the issue is you really need a good model I bought my model as I didn't have time before the competition season started to get it modeled and printed still going to run out of time as my competition this weekend and I'm not quite ready.

@scalebuildersguild Год назад

Good luck at the comp this weekend!

@gibsonlife573 Год назад

Wow

@orcrawler7387 Год назад

Foam machine gun turret for the roof?😂

@christophermears7738 Год назад

What type of paper using to wrap that molding before you put in the bench or the vice rather

@scalebuildersguild Год назад

That's parchment paper, and it's the best! Nothing sticks to it.

@HallsRodShop Год назад

I really want to print a 1958 to 1960 ford Thunderbird body so I can build a 1/10 scale version of the car I am building!

@scalebuildersguild Год назад

Go for it!

@bluegroovemodelsports9650 Год назад

I am more of a racer than a scale builder . And I use my 3D printer for pit tool organization.

@ashleyconnelley1856 Год назад

I’m really wanting to try this process myself. It just looks so awesome

@ashleyconnelley1856 Год назад

I’m really really excited to see the end results for you an josh as well

Далее

Road to the Rockies Ep5 - Someone call 911!

13:16

Road to the Rockies Ep5 - Someone call 911!

Просмотров 10 тыс.

Volvo TP 21 and Volvo TPV | Radiopersonterrängbil 915 “Suggan” | Arsenalen Swedish Tankmuseum

22:09

Volvo TP 21 and Volvo TPV | Radiopersonterrängbil 915 “Suggan” | Arsenalen Swedish Tankmuseum

Просмотров 142 тыс.

Федункив против брака Харламова 😳 #ComedyClub #КамедиКлаб #Батрутдинов #ГарикХарламов #тнт #свадьба

00:59

Федункив против брака Харламова 😳 #ComedyClub #КамедиКлаб #Батрутдинов #ГарикХарламов #тнт #свадьба

Просмотров 274 тыс.

World‘s Strongest Man VS Apple

01:00

World‘s Strongest Man VS Apple

Просмотров 33 млн

Comedy Club: Телефонные мошенники | Тимур Батрутдинов, Демис Карибидис @ComedyClubRussia

12:39

Comedy Club: Телефонные мошенники | Тимур Батрутдинов, Демис Карибидис @ComedyClubRussia

Просмотров 467 тыс.

Indoor plant care hacks for plant lovers 🌿 #shorts #planting #garden #diy #indoor

00:34

Indoor plant care hacks for plant lovers 🌿 #shorts #planting #garden #diy #indoor

Просмотров 3 млн

The Whaling Harpoon Cannon (The BLUBBER BUSTER!!!)

17:03

The Whaling Harpoon Cannon (The BLUBBER BUSTER!!!)

Просмотров 838 тыс.

Building a Tiny Office Pod Under My Stairs

51:47

Building a Tiny Office Pod Under My Stairs

Просмотров 3,2 млн

NEW!! Negative G RC C2 Overview - New Class 2 Chassis Kit!

5:04

NEW!! Negative G RC C2 Overview - New Class 2 Chassis Kit!

Просмотров 2,7 тыс.

Why European Trucks Have Up To 770 HP And US Don’t

9:22

Why European Trucks Have Up To 770 HP And US Don’t

Просмотров 2 млн

Adam Savage Reacts to Hacksmith's Newest Lightsaber!

14:35

Adam Savage Reacts to Hacksmith's Newest Lightsaber!

Просмотров 1,5 млн

WhistlinDiesel Cybertruck Durability Test #1

21:55

WhistlinDiesel Cybertruck Durability Test #1

Просмотров 24 млн

Plastic Makers Have A Big Secret: They’re Experimenting On You

15:35

Plastic Makers Have A Big Secret: They’re Experimenting On You

Просмотров 208 тыс.

Did I build an AT-AT that I can ride on?

22:08

Did I build an AT-AT that I can ride on?

Просмотров 480 тыс.

Camping with 25+ Item Survival Tin Worth £200: Solo Overnight

36:35

Camping with 25+ Item Survival Tin Worth £200: Solo Overnight

Просмотров 59 тыс.

Road to the Rockies Ep6 - I cried.

14:17

Road to the Rockies Ep6 - I cried.

Просмотров 12 тыс.

Федункив против брака Харламова 😳 #ComedyClub #КамедиКлаб #Батрутдинов #ГарикХарламов #тнт #свадьба

00:59

Федункив против брака Харламова 😳 #ComedyClub #КамедиКлаб #Батрутдинов #ГарикХарламов #тнт #свадьба

Просмотров 274 тыс.