Robo-Airsoft: Robo Gear Review - Ronin Tactics Senshi Belt

Подписаться 31 тыс.

Просмотров 113 тыс.

50% 1

In this edition of Robo-Reviews, I finally take an in depth look at the Ronin Tactics Senshi belt. For those of you have heard my comments on this belt over IG or FB - I truly believe it's one of the best solutions to the "Battle Belt" problem in the tactical world.
If you've always wanted a battle belt that felt like a SINGLE belt - the Ronin Tactics belts are designed for you. I'll go over their pros, cons, and differences in detail to help your decision to grab one.
Huge thank you to Tu and the Ronin team for always being so open and great source of inspiration and information.
Please take the time to visit Ronin Tactics:
www.ronintactics.com
Hope you enjoyed! Please let me know what you think in the comments below!
Want to see something I own reviewed? Tell me!
Coming soon: Gear reviews: RWA custom Mission Spec EOC, LALO athletic shoes, and Inforce WML/APL.
As always, if you dig these videos - help me make more: like, share, and subscribe!
Support your local airsoft scene!
Play airsoft safely and responsibly. Always carry your weapons in a gun bag and never brandish them in public. Remember - LE officers don't have the time, and will not risk, checking if you're holding an airsoft weapon.
ALWAYS wear ANZI/Mil-Spec approved ballistic eye wear.
Check out my awesome sponsors:
Red Wolf Airsoft:
www.redwolfairsoft.com
Use ROBO10 for 10% on your orders.
Enola Gaye Smoke Grenades:
www.enolagaye.com
Check me out on Instagram & Twitter:
/ robomurray
/ robomurray
Check out my clothing line:
www.robo-apparel.com
/ roboapparel
My Airsoft Team:
/ theairsoftoperators
Perroz Designs:
www.perrozdesigns.com
Music used: Dystopia by Per Kiilstofte machinimasound.com/music/dyst...
Licensed under Creative Commons Attribution 4.0 International (creativecommons.org/licenses/b...)
Music used: End Game by Per Kiilstofte machinimasound.com/music/end-...
Licensed under Creative Commons Attribution 4.0 International (creativecommons.org/licenses/b...)
Music used: Setting Sail by Per Kiilstofte machinimasound.com/music/sett...
Licensed under Creative Commons Attribution 4.0 International (creativecommons.org/licenses/b...)

Спорт

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@jessonbateman8260 8 лет назад

Fantastic review brother. As someone who runs this in the Real World the stiffener is a must for those guys considering it for real ammo. Standard load of 2 rifle mags, 2 pistol mags, side arm, fixed blade and med kit/dump pouch things start to get heavy. The stability the stiffener offers makes a huge difference 8-10 hours into a day and mitigates any loosing of the Velcro system due to weight.

@gregorypegory1781 8 лет назад

Hey Robo, I picked up a Task Force Belt from The guys at Ronin Tactical, just have to say the belt is fantastic! Great retention, compact, pricy!; however, Im super happy with the purchase! Thanks for taking the time to review it and hats off to the guys and gals at Ronin Tactical! have a good one Robo!

@robomurrayairsoft 8 лет назад

+Greg Michlik Yeah man - I agree...it's definitely a pricey option. But like you've discovered - the "value" vs that "cost" is pretty high. You at least get a belt that is literally best of class. Glad you're enjoying it dude - have a great time with that belt; mine has been still kicking ass...just as well as it did on day 1.

@JustinxSpencer 8 лет назад

just spent: $80 HSGI slim grip battle brly $80 HSGI cobra inner $20 padded velcro inner $15 shipping and that shit still sags like the condor battle belt😂😂😂 gonna return and pick this up

@JustinxSpencer 7 лет назад

***** sick! Thanks for the update!

@robomurrayairsoft 6 лет назад

I do the same thing with the inner belt haha. LOVE this system - still do and will until laser-belts exist. :P

@iamredeemed949 7 лет назад

the founder of ronin tactics is a special forces green beret. their products are made in the usa and he designs the products so its good to go. also highly recommend training with him, it will make you a better shooter

@ernandesjunior1928 8 лет назад

Nice video Robo, congrats man.

@TMmacDK 8 лет назад

Finally...! Something that can hold my lollipops. So happy. Looks really cool. Might be on my wish list for next year.

@robomurrayairsoft 8 лет назад

+Mark Mikkelsen HAHAHA. All jokes aside though: I highly suggest this product, brother. 100%

@RiversAirsoft 8 лет назад

great informational video. looking into getting one of these now for sure

@JoeSalazarIII 8 лет назад

I had been looking at this belt for a while. but DAMN YOU. I just bought the Senshi!!! hehe. Thanks for the great review. I liked and subscribed.

@robomurrayairsoft 8 лет назад

+Joe Salazar III Thanks for the kind words - glad you enjoyed it! Cheers!

@arcanesoldierx 8 лет назад

good stuff!, i've been looking for more reviews on this

@robomurrayairsoft 8 лет назад

+arcanesoldierx Glad you found it helpful, brother!

@3lesproductions588 8 лет назад

nice video robo, this belt looks great!!

@robomurrayairsoft 8 лет назад

+3LesProductions Thanks brother!

@WeathermanMilSim 8 лет назад

So I'm finally going to my first MilSim even with a team I helped put together. Wanted to say thanks for the great and helpful videos. I learned better game 'manners' from watching your videos. Also learned how to set up a gopro helmet too. Anyways, just wanted to say thanks. maybe I'll see you at Op IronHorse in February

@robomurrayairsoft 8 лет назад

+Khaos Airsoft Right on brother! Glad anything I have done or shown has helped. Thank you very much for taking the time to stop by and let me know, and for watching my vids!

@TheNameJohnny 8 лет назад

Nice video bro keep up with the good content.

@AnthonyGugliotta 8 лет назад

9:44 I can justify spending $200 on a belt, but when they quoted me upwards of $85 to ship to Toronto... ...I'm sure its a great product, but I'll look for a domestic option.

@mouthbreather280 3 года назад

They don’t even ship to Canada anymore.

@simoneriksson6489 7 лет назад

I am using the TMC 1.75 Fighter Belt myself, it is an exact copy of the Ronin Tactics Senshi Belt. It uses genuine Multicam pattern and also a real Austri Alpin (cobra) buckle. It is very rigid, stitches are well-made and hasn't failed me once. I use two HSGI pistol taco pouches on it and also two Emerson (replica) taco pouches (which has proven to hold my mags just as great as the HSGI tacos fyi). Sometimes you don't need to go for the more expensive products. I wouldn't doubt the Ronin Tactics Senshi Belt, seems like an awesome belt however the TMC one is just as good.

@MrCoffee0996 5 лет назад

Any problem weaving the Emerson tacos' molle on TMC's micro molle system?

@Mattcamel51 8 лет назад

Thanks for clarifying the differences. I hope they release an inner belt in the new Army coyote brown color.

@robomurrayairsoft 7 лет назад

They have released a Tan inner belt.

@timlipinski2571 7 лет назад

Great looking belt and Five Stars for having a Cobra Belt Buckle ! My Tactical Belt is my old SOE EDC Belt w/Cobra Belt Buckle (but looks new) that I moved a lot of item onto... Do not need the Velcro for I do not tuck in the shirt and sometimes wear a jacket... My most important item is the 5.11 Dump Pouch so the zombies do not track or follow... Just added the Plastic Sheath of the Leatherman Raptor... And the light weight survival knife the SOG Seal Pup mounted on the strong side and may need a tie down. Remember your Tourniquet and Trauma Kit ! tjl

@robomurrayairsoft 7 лет назад

Sounds like a good setup, Tim! As for medical: I'm never far from a Trauma Kit and never without at least one TQ - on the range, at an airsoft event, or just walking down the street. Motto I like to live by these days: if you are skilled in making holes, you should also be skilled in fixing them - and that job gets a LOT harder when your tools are no where to be found.

@shtm.o.g.airsoft6160 8 лет назад

This is an awesome setup, I have always had problems with two belts....

@robomurrayairsoft 8 лет назад

+S.H.T. Ops Two belts eventually made me want to lose my mind haha.

@BATER915 5 лет назад

Great review..

@marshalljones4315 6 лет назад

Are you able to buy just the softer Velcro inner belt for replacements for when the Velcro would eventually wear out if being used on a every day basis? Nice video!!

@robomurrayairsoft 6 лет назад

Great question, and you sure can. It's under the Accessories tab, instead of the Belt one. www.ronintactics.com/store/p137/Ronin_%22Inner_Belt%22_%28SOLD_SEPARATELY%29.html

@marshalljones4315 6 лет назад

Robo Murray Airsoft oooh that's awesome thank you!

@MrCoffee0996 5 лет назад

Great review! Any problems attaching regular molle pouches on those mini PALS system? Just worried my current mag pouches won't fit in.

@derekbennett9661 8 лет назад

Robo, great video as always. Not knocking the Ronin as it's an awesome system but take a look at snake eater tactical for their hyplon inner belt in lieu of the ronin inner. I use it with mine and much prefer it.

@robomurrayairsoft 8 лет назад

+Derek Bennett Thanks man! And good alternate suggestion :)

@pbl18 8 лет назад

Not so expensive ! If you think a HSGI SGPB is 70 $ + 40-45 $ for the inner belt, we are at 110 $. For the price difference, depending on your needs, it is not that bad ! Good video Robo, thanks !

@robomurrayairsoft 8 лет назад

+oli36 And that's my point. Most people just see the number (the all inclusive number) and are like "WHOOOAA"...but they're taking it at a face value; they're not considering all the LITTLE things that go into other belt systems that pretty much add up to the same number in the end haha. Thanks for watching, bud! I appreciate it greatly!

@patrickbaker8984 6 лет назад

Been looking for a new belt system, ran a rigger belt with a condor battle belt over top... it flaps around like crazy and doesnt stay down unless im running my leg rig on it to hold it down. Looked at the cobra belt by its self and thats a bit of money for only a portion of the system as i was going to buy an HSGI SGPB and then a friend mentioned this belt to me. This is the solve all belt system i believe and im going to be purchasing this thats to this review on it. And this system saves me a ton of money.

@robomurrayairsoft 6 лет назад

I'm glad you found it useful, dude! You won't go wrong with choosing this belt, I at least promise you that. Cheers!

@jacobham322 8 лет назад

Robo great video man and i have a important question to ask you. What is your edc every day carry and would this belt work for edc. And this is extremely important to me pancakes or waffles. Once again great video.

@robomurrayairsoft 8 лет назад

+Jacob Ham Haha - pancakes or waffles :P My EDC is generally just a HSGI riggers belt, but you could easily wear this as an EDC belt, although - I would probably suggest the Shooter or Warrior belt in that case (just because it's just a bit less rigid). Especially for me, as a Canadian - where we can't carry a firearm, theres not a huge need for a crazy-sturdy platform as a belt. Just one that'll support minimal tool carry...like a knife, flashlight, and/or multitool.

@HarryBrehh 8 лет назад

How are you liking it? Thinking about picking one of the Ronin Tactics belts up :)

@robomurrayairsoft 8 лет назад

+Harry Love it dude - still the best belt in my world.

@Iaretreytrey 6 лет назад

Im about to buy this.

@robomurrayairsoft 6 лет назад

Great choice - it's been my tried and true option now for a while, and I have no motivation to look at other options anymore. Most of my buddies have adopted the same or similar systems now.

@Iaretreytrey 6 лет назад

Well, I have that belt now, and I have to say, it's worth every penny. I wear a 32" waist in most pants sizes and the small size Senshi is perfect for me.

@JohnWicksPencil14 3 года назад

As far as sizing goes, the small runs up to 34 and the medium begins at 34. If I’m a 34” waist what size would you reccomend?

@harrisonking8156 8 лет назад

A belt similar to this that I know of is made by a company local to me, Australia. It is made by Platatac and is called the SICC Mk. 2. Give it a look, they have some really nice stuff!

@robomurrayairsoft 8 лет назад

+Mr. SirKing I actually own a Platatac shoftshell jacket (Harry Hard) and one of their ball caps. I'll take a look at the belt too! Cheers!

@harrisonking8156 8 лет назад

+Robo Murray Airsoft no problem mate! Just don't be too scared about the shipping xD Also, they have added a LOT of new stuff recently. You can also check them out on eBay, if you just search for 'platatac' and click on anything with a pure white background, then click sellers other items you'll come across everything they have on eBay

@rgt_cb650r6 4 года назад

I have a 38-40 inch waist depending on how tight I wrap my tape measure around, do you recommend the size M or L? The M is recommend up until 39 inches, do you think it can easily accommodate a 40 inch waist or should I go for the L?

@Th3HondaGuy 8 лет назад

Currently running an HSGI battle belt system with a G-Code RTI setup and I find that it's pulling the outer belt causing a sag and unnecessary movement while running. This belt looks great, though I'm wondering how it would perform with the G-Code with the belt's limited vertical MOLLE real estate. Does anyone have experience with a G-Code on this platform? Thanks.

@joshuafreeman4459 8 лет назад

Nice review. I have a question, how would a molle pouch that uses 4 channels mount to this? Could you make one work?

@robomurrayairsoft 8 лет назад

+Josh McMichael You could make it work, as it's a rigid enough platform, just understand the bottom rows won't be attached (or however you decide to actually mount it). It's not really designed for such large pouches, but it will work with them just fine.

@TheFpsStealth 8 лет назад

Anyone got a UK Supplier for these belts?

@MrDeRooy 8 лет назад

Had an HSGI battle belt for a year and loved it except that it moved around to much and the added weight of the belt itself kinda sucked.. Changed everything over to Raven Concealment belt mounts on a Ferro Concepts belt and its 100x better. Downside to this is having to weave the belt in and out of belt loops and the mounts. These belts would solve all my problems

@robomurrayairsoft 8 лет назад

+MrDeRooy That's essentially the same line of experience that lead me to this belt. Almost 100%

@MrDeRooy 8 лет назад

Robo Murray Airsoft And if the Dollar wasnt so shitty rite now id probably make the switch. So many things to buy but not worth it yet.

@stephanscholzen4497 8 лет назад

Could you still make a rappeling although it is attached with velcro on the inner belt?

@mudonyourface6432 8 лет назад

Only if you have the outer belt secured. As a climber, I would not feel comfortable relying on any rigger belt (particularly anything with a quick-release system like a Cobra buckle) for rappelling. I would only consider it as a desperate measure, which you should never encounter in airsoft. If you plan on rappelling at a milsim event where that's allowed, I would invest in a low-profile, purpose-made mountaineering harness and some qualified instruction. Rappelling is inherently dangerous, so treat it accordingly.

@aisawan1990 5 лет назад

Ronin belt so good

@psortiro 5 лет назад

Is this belt good for IPSC?

@simoneriksson6489 7 лет назад

I've just recently bought the TMC Fighters Belt. It is basically the very same belt as the Ronin Tactics Senshi Belt, and having owned TMC's VTAC Brokos Belt I know they're great quality for what you pay (not very expensive), easily in the class as the Ronin Tactics, despite being a chinese clone/copy. So I am awaiting it now, looking forward to it :)

@robomurrayairsoft 7 лет назад

Have you owned an actual Ronin or VTAC belt, instead of TMC? Having owned many "real" products as well as the TMC counterpart - I'll say this: while they'll do the job for an airsofter, at a great price...there's a reason they're a repro belt, made in China...and they're no where NEAR "easily in the same class as the

@simoneriksson6489 7 лет назад

Robo Murray Airsoft Ok I'd agree about that class sentence, that may have been an exaggeration on my behalf but there are shit chinese repros and there are grear chinese repros. I'd say that 101Inc and Emerson are in the lower quality section with their gear while TMC is closer towards Flyye or Pantac or some higher end chinese makers. Their pouches, belts, vests feels stiff and rugged, made from 500D to 1000D Cordura. If I'm not mistaken, 101Inc and Emerson often use Nylon in their products so they feel lighter and therefore more prone to rip. TMC also often use genuine Multicam pattern in their designs. But no, the TMC JPC may not stand up to the Crye JPC (the rubberized material on the shoulders are not the same as for an example) but the closest chinese JPC clone i've seen is the one made by Modi (I own one) and those utilize the same rubberized thing on the shoulders as the Crye JPC from what I've seen. It feels very rigid and I've played with it for several day milsims, and it has held up fine with pretty much no damage. And honestly, since the vest's sole purpose is to protect the wearer, if one would switch out the insert plates for real SAPI ones in the Modi JPC, that vest would do just as fine as the Crye in stopping a bullet, just as an example. Not that it matters in Airsoft anyway, but still worth noting. And secondly it comes down to budget. Yeah, i could spend a ton of $$$ on "the real deal" to look and act the part (operator) but it feels so unworthy and too damn expensive just for a hobby in which you participate once in a while with a few friends. And I'm still using a multicam-inspired loadout, but on a budget level and it serves me just fine (nothing's been damaged so far) and I can still "look" the part.

@robomurrayairsoft 7 лет назад

Wasn't disagreeing with you original statements other than how you were first presenting it and comparing it (mostly the class sentence). Your arguments are definitely reasonably and logically founded; I agree with the use-cases you've presented. For me - I've gotten into buying real stuff because I've gotten into doing a lot more REAL AR / pistol work...where I'm carrying actual heavy, loaded magazines, and wearing ceramic plates in my carriers - hence why I own real stuff. But for "just airsofting" - it's not ENTIRELY necessary...although, the quality benefits of real kit are undeniable: Stitching and material quality in repro vs real is substantial, and does matter at SOME point in the wearers use.

@simoneriksson6489 7 лет назад

Robo Murray Airsoft No hard feelings :) Yeah, well... in a real world situation (ISPC, military, law enforcement etc) you are more dependent of your gear and so therefore I'd see a bigger purpose of using "the real stuff". But for Airsoft only? Not worth it really.

@Anthony-qk1lk 8 лет назад

Awesome job dude, speaking of job, What do you do for work, cause all of this stuff I've seen looks expensive as heck. Sorry if this is too personal for ya 😂

@robomurrayairsoft 8 лет назад

+Anthony Layfield Thanks for watching, dude. I'm a Sr. Accounts Specialist at an extremely large data security company; corporate job :)

@Anthony-qk1lk 8 лет назад

Robo Murray Airsoft That sounds really complicated to do xD

@gorocks93 8 лет назад

I like the slim profile and the integration of velcro with an inner belt inside the pants. My only concern here is that I want a belt that I can keep in my truck for tactical situations. I want to be able to put it on quickly and if I'm not already wearing the inner belt, am I going to have issues? I'm a big guy so I need it to stay put at my waist.

@robomurrayairsoft 8 лет назад

Sorry, had missed this, Mike. Apologies for the delayed reply. The system is definitely designed to work in cooperation with the inner belt. In your described scenario, without the inner belt in use, the outer belt being worn only around the waist (no belt loops, no inner belt), it's going to be a very unstable platform, I'd say. I mean - that's the whole concept of a traditional battle belt system: it's an outside belt, that has a wide platform to provide resistance against movement off the waist. For your described application, I'd still probably recommend a traditional battle belt system, if only a low profile one (Crye MRB or at least just not a hugely bulky solution).

@georgemagallon3977 6 лет назад

Have you seen the shuto belt?? Any info??

@beck4218 2 года назад

Your knife should be on your support side. It’s to defend against melee to protect your sidearm draw.

@legoman07219 8 лет назад

I've been saving up for the Ares Armor Micro Belt, but now I've gotta look at this one. Price wise, the AA is right between the two tiers from Ronin. Anyone have experience with both to compare them?

@legoman07219 8 лет назад

And great job Robo, love your vids, man!

@robomurrayairsoft 8 лет назад

+legoman07219 Thanks, brother. And personally - I don't have any experience with the Ares Armor option...so I can't really speak to that one. Sorry, bud :(

@Cozworth1007 7 лет назад

i was wondering how this belt holds up with weight, generally i carry around 8-12kg in mg belt kit and i dont fancy buying a belt that will be dropping off my hips without a harness. tia

@robomurrayairsoft 7 лет назад

This is the stiffened nylon version - and I run 3 fully loaded AR mags, 3 fully loaded double-stack pistol mags, a pistol/holster, and a full IFAK off it just fine. No issues.

@tannergrosz5245 7 лет назад

@robo murray airsoft. what size pants do you wear in relation to the belts size? i think im between small and medium because i normally wear a 32 however my waist measurement is different. also if anyone else could who has experience with these belts answers it would be appreciated. i just dont want to order the wrong size as they dont do returns

@robomurrayairsoft 7 лет назад

I wear a 34 Long in Crye pants. And yes - pants and belts will differ...as you shouldn't confuse a "34 waist" to how big a belt is. When you order a tactical belt - it's going by the actual inches around your waist, not your pants waist size. You need to actually measure your waist and then line it up with the size of belt you're ordering.

@flippino35 8 лет назад

how do you size it before buying?

@robomurrayairsoft 8 лет назад

+flippino35 You measure your belt-line in inches.

@scr1be 6 лет назад

3 years later, have you found a better inner/outer belt system?

@robomurrayairsoft 6 лет назад

I have not. In fact. I now own two of them haha.

@sapperjp1014 8 лет назад

What kydex holster are you using for your 1911

@robomurrayairsoft 8 лет назад

+Josh Peterkin Not a brand of any kind - it was just a home-made job based on me needing to have a kydex rig for it, for an event, in a short amount of time.

@QWERQWER1995 8 лет назад

Anyone who have tried using Blue Force Gear M4 pouches on this? If so, how is it?

@sig9287 7 лет назад

How does this compare to Crye MRB?

@robomurrayairsoft 7 лет назад

Two different solutions, to be honest. Crye MRB, although it features an inner/out belt - it's still closer to a traditional battle belt, than a shooters belt like the Ronin offerings.

@Uncletito76 8 лет назад

+Robo Murray Airsoft Hi how did you get them to ship to Canada when their site doesn't allow you to do so?

@robomurrayairsoft 8 лет назад

+CANTACPREP email sales@ronintactics.com. Tu will manually invoice you.

@mouthbreather280 3 года назад

Robo Murray Airsoft this is good to know. I was about to have it shipped to a US location. Are they going to charge an obscene amount for the across border shipping. Someone said it was like 85$ to Canada?

@cybergoth665 8 лет назад

Robo, how do you like the HSGI Magnet dump pouch? I've been thinking about picking one up.

@robomurrayairsoft 8 лет назад

+cybergoth665 I love it. It's light, it's functional. The only downside is the pouch-lips are a LITTLE in the way at times. A lot of guys will "fix" this by cutting off one side of them. I honestly don't find it THAT big of a problem...so therefore I haven't made the mod yet. But other than that...it's a great pouch.

@TylerStupid 8 лет назад

Buy a crye mrb. Minus the D ring it looks better and performs just as well in my opinion.

@narsilea8091 6 лет назад

This is an amazing belt, is there anything similar but not so expensive?

@robomurrayairsoft 6 лет назад

There are actually a few belts on the market of this caliber. Most of the "big name" ones, or belts made by former SOF guys (like this one) generally come with a hefty price tag. Now, depending on where you are, or if you don't mind ordering from Canada, there are two companies that make similar style: Persec Aware, and Pekan Outdoor. Search for them on Google.

@narsilea8091 6 лет назад

Robo Murray Airsoft thank you! I will look in to it!!

@alecramos4284 5 лет назад

I know this is a bit late but what knife is that? Is it a rubber knife?

@robomurrayairsoft 5 лет назад

That's a real knife. It's a Spartan Blades Enyo.

@alecramos4284 5 лет назад

Robo Murray Airsoft ohhhh. Thanks man. Love the content

@robomurrayairsoft 5 лет назад

No problem brother - thanks man!

@GUNSHIPFLEX 7 лет назад

I'm sorry if mentioned but who makes that holster?

@robomurrayairsoft 7 лет назад

Greg M it's actually just a kydex holster a buddy made me quick to carry a 1911, as I didn't have one. it's a one-off, no-company holster.

@Reclamated 5 лет назад

I personally prefer my Blue Alpha Gear battle belt.

@dawsonfischer 8 лет назад

whats a d ring?

@Deadpool-ix3pl 7 лет назад

robo i have an issue im in canada and wen i check the shipping options it says does not ship to this adress im situated in quebec city

@robomurrayairsoft 7 лет назад

You just have to email them at sales@ronintactics.com to set up a manual invoice/order.

@Deadpool-ix3pl 7 лет назад

Robo Murray Airsoft aight thanks very much man keep up the good worik

@TheFpsStealth 8 лет назад

5:30 I'm sold

@TheFpsStealth 8 лет назад

is the inner belt included with it? thanks :)

@robomurrayairsoft 8 лет назад

Yes, they come together.

@Mallens_fxed 8 лет назад

Hey robo, what size waist are you and what size belt did you buy?

@robomurrayairsoft 8 лет назад

+Matt Allen I wear a 32-34 in pant size, and I ordered a Medium.

@ros8700 8 лет назад

+Robo Murray Airsoft Did you order based on pant size or measure with a tape measure? how is the fit?

@robomurrayairsoft 8 лет назад

Rolando Salgado You have to order using your belt size, not pants size. If you have a tape measure - use that. Else - go get a tailor to measure (safest bet, so you know for sure). The fit is awesome. As long as you order the correct size - you still have a few inches of adjustment to make it perfect.

@balencisbattles4645 8 лет назад

@robo murray airsoft, i have a echo one glock timberwolf, do you no a holster that would be compatible? CANT FIND ANY, and forget my earilier comment.. buying the belt XDD

@robomurrayairsoft 8 лет назад

+HilariousCsgoVids A Glock 17 holster will work, with a caveat: you need to file down the squared rail at the front of the TW to match the contours of a Glock rail. This is what keeps it from being incompatible with G17 holsters. This mod does not affect the ability to use the rail on the TW at all.

@balencisbattles4645 8 лет назад

Robo Murray Airsoft thanks a bunch!

@InkwellFoto 6 лет назад

What about sizing? What size do you wear and size you ordered?

@robomurrayairsoft 6 лет назад

InkwellFoto it goes by inch measurement of the actual belt. I wear a medium. As for pants - I wear 33-34 waist.

@InkwellFoto 6 лет назад

Robo Murray Airsoft thanks, I just placed an order for XL. I normally wear a size 38 pants and 40 belt. When I AIWB carry its 44 (measured). So I'm taking the chance this will work. It was there last XL TF in multicam black

@robomurrayairsoft 6 лет назад

InkwellFoto no problem man - glad I could give any guidance. Honestly - it's the best belt you'll ever purchase. Most of my close friends now own them (we're talking a solid almost 20 dudes that I know of) and they all share my opinion. Tu and team killed it when they released this belt. Let me know how you like it when you get it!

@GregoryWong86 7 лет назад

Where can i buy this belt in Canada?

@mouthbreather280 3 года назад

You can’t, at least not when I checked recently. You’re going to have to ship it to somewhere in the US.

@seabonesairsoft 8 лет назад

Hey Robo, what's the knife on that belt?

@robomurrayairsoft 8 лет назад

+HaVoC Airsoft That would be a Spartan Blades Enyo. I don't carry it during airsoft games, as I'm an advocate of avoiding real weapons on the field. But I do keep in on there for "training" and such.

@seabonesairsoft 8 лет назад

+Robo Murray Airsoft very nice indeed. Is it a pretty good knife?

@robomurrayairsoft 8 лет назад

HaVoC Airsoft It's an excellent knife. Costly - but Spartan uses some of the best steel on the planet. It's a shop run by two former Army SF members.

@seabonesairsoft 8 лет назад

+Robo Murray Airsoft sounds pretty great indeed! thanks!

@Murderface666 5 лет назад

There is a such thing as "over-selling a product." I'll just get a the cobra buckles from my old belt, order some nylon and hook & loop, some epoxy and use my grandma's industrial sewing machine to make my own.

@magnusrix-mller3353 4 года назад

Good for you.

@Murderface666 4 года назад

@@magnusrix-mller3353 derp derp

@davidT1120 6 лет назад

What holster are you rocking?

@robomurrayairsoft 6 лет назад

This day I was wearing my Safariland 6354do for a Glock.

@davidT1120 6 лет назад

Robo Murray Airsoft you where wearing a different holster in the video it isn't a 6354, and it was a 1911 platform pistol with a light mounted

@robomurrayairsoft 6 лет назад

Ahh - sorry, had quickly answered this from my phone, and thought the comment was on my new montage video; sorry about that. That WOULD have been confusing :P In THIS video - it was just a custom kydex holster a friend had pressed for me; it isn't something you can purchase, unless you just ask any kydex company to make a holster for a 1911 with an Inforce APL on it. Those kinds of companies are dime a dozen though - so lots of options out there. Just search for "Kydex holster 1911 inforce APL".

@davidT1120 6 лет назад

Robo Murray Airsoft sounds good, thanks for taking the time to get back at me, I appreciate it brother 👍

@JAKMANJoshtheAKMAN 8 лет назад

anyone notice that AK in the back ground?

@robomurrayairsoft 8 лет назад

+Joshua Combes PTS Beta Project AK.

@JAKMANJoshtheAKMAN 8 лет назад

OHHH ive been wanting one of those im an ak guy :) when im finally at the gear level for MSW im gonna be on the russian side

@balencisbattles4645 8 лет назад

was going to buy it but 185 for a belt..

@tylerehrig6722 5 лет назад

This isnt a normal belt. This is more military/LEO/ or any civilian that wants to take gun classes/be ready

@EasyOhh 4 года назад

Normally I’d say that $185 is way too much for a belt, but not when it comes to the ronin belts. Designed and created by someone who has dealt with the common issues seen with other “battle belts.” I’m dealing with these issues with a belt I paid $130 for, and I’m wishing I would’ve ponied up and spent the extra $50 for proven quality.

@MrDavidmauck 5 лет назад

What is the knife for? I see a lot of airsoft guys run a knife...awkward.

@robomurrayairsoft 5 лет назад

I don't run a knife during airsoft. This is also my range belt.

@isiahagibson566 8 лет назад

What do you recmend for a airsoft beginer?

@jamesmcnamara3134 8 лет назад

+Isiaha Gibson get one of the new combat machines or a CYMA AK, and a TMC D3CR repro, and some crye replicas, maybe a fast helmet. you'll be a noob without looking like one ;)

@JAKMANJoshtheAKMAN 8 лет назад

+Isiaha Gibson ya and dont be affraid to where a hoodie when you play, its actually a pretty good idea dispite what people say about looking noobish lol :P

@isiahagibson566 8 лет назад

Thanks

@marcchamberland8796 8 лет назад

+James McNamara The only decent advice you gave was the Cyma AK, Combat Machines and TMC gear is a complete waste of money.

@JAKMANJoshtheAKMAN 8 лет назад

tmc? sorry im not familiar with that acronym what is it?

@CrazyAboutUK 8 лет назад

+robomurryairsoft now do your 2nd line

@robomurrayairsoft 8 лет назад

+CrazyAboutUK I will actually be reviewing my Mission Spec EOC setup in the next week or so.

@CrazyAboutUK 8 лет назад

+Robo Murray Airsoft sweet that is what I wanted you to review

@mouthbreather280 3 года назад

Bruh, you bought a 200$ gun belt for Airsoft. You could have bought a strictly airsoft use belt. Still really cool belt. If you want quality this is the best, and price reflects that.

@robomurrayairsoft 3 года назад

Except if you look at the rest of my content, you'll see I also shoot a lot of firearms ;)