Robo Gear Build: BNVD 1431 Mk2 Tube/Lens Swap - How Nightvision is Built

Подписаться 31 тыс.

Просмотров 4,9 тыс.

50% 1

Surprise - bet you didn't expect an upload! Here with my obligatory once-a-year upload (haha?).
In this video - something a little different: I show you how to build a BNVD 1431 Mk2, since I have to swap out my tubes and my lenses. I was lucky to get a tour of OpFor Night Solutions' new manufacturing/build facility, where Z showed me the ins and outs of his operation and how to build night vision devices.
Fun Fact: OpFor Night Solutions owned/operated by my long-time airsoft-tech/great friend, Z. If you guys liked my "Gun of Robot" ZTW - then you'll understand why I trust Z with NVGs as well.
If you want to learn more from the companies discussed in this build video:
OpFor Night Solutions:
nightsolutions.ca/
IG: opfornightsolutions
Argus Night Vision Technologies:
www.theon.com/argus
IG: @argusnightvision
Rochester Precision Optics (RPO):
www.rpoptics.com/
Hope you enjoyed!
As always, if you dig these videos - help me make more: like, share, and subscribe!
Support your local airsoft and firearms communities!
Play airsoft safely and responsibly. Always carry your airsoft guns in a gun bag and never brandish them in public. Remember - LE officers don't have the time, and will not risk, checking if you're holding an airsoft gun.
Always treat any firearm with respect. Assume it's loaded, don't put your finger on the trigger unless ready to fire, don't point any firearm at anything you're not willing to destroy, and know what lies in front, beyond, and beside your target.
ALWAYS wear ANZI/Mil-Spec approved ballistic eye wear.
Check me out on Instagram & Twitter:
/ robomurray
/ robomurray
Check out my clothing line:
www.robo-apparel.com
/ roboapparel
Check out our consulting company
WGT Consulting
www.wgtconsulting.com
IG: @wgtconsulting
Music:
Anton Vlasov from Pixabay.com - "Slow Trap"
Prazkhanal from Pixabay.com - "Pink Rolex"

Спорт

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@justice82nd 11 месяцев назад

Feels almost nostalgic to see a Robo Murray video posted again. Great to see!

@robomurrayairsoft 11 месяцев назад

Thanks for continuing to watch, man. Especially since I'm so terrible at anything close to frequency or consistency these days. Life gets in the way a lot. Stoked you still enjoy what I put out!

@kimkim78976 6 месяцев назад

I really want to see the next video on assembling the Argus PVS-31.

@nathanielhoward7109 11 месяцев назад

I've literally never clicked a video so fast. You were my inspiration for getting into milsim

@robomurrayairsoft 11 месяцев назад

Stoked to hear that man! Hopefully you've been enjoying getting into milsim since. Thanks for taking the time to excitedly watch this one.

@nathanielhoward7109 11 месяцев назад

So glad to see you dropping vids again

@robomurrayairsoft 11 месяцев назад

Thanks man! I know I suck at posting with any regularity these days; adulting has majorly gotten in the way - but I still try to post stuff when it's interesting etc.

@nathanielhoward7109 11 месяцев назад

@robomurrayairsoft yeah I get it since my son was born I feel it for real. But I do miss you milsim vids

@JaredPirrie 9 месяцев назад

How did I miss this

@miklosbelhazy741 11 месяцев назад

The man are still alive!

@robomurrayairsoft 11 месяцев назад

Hahaha. I've made that same joke about myself often: my scheduling has sucked over the last number of years...and from the standpoint of my RU-vid uploads - it kinda could seem like I literally fell off the planet haha. But I swear - I'm still alive, exist, etc. and definitely am not an AI clone hosted in the Matrix. ;)

@BallisticsCanada 11 месяцев назад

Ehhhhh he's back baby! 🔥🔥🔥

@robomurrayairsoft 11 месяцев назад

ehhhhhhhhhh! haha. Thanks for watching bud!

@rosscocoating1729 11 месяцев назад

100/100 on the Gucci factor with the matching battery strap ;)

@robomurrayairsoft 11 месяцев назад

HAHA. You know it ;)

@ChevTecGroup 6 месяцев назад

Longform on any second channel with short updates/highlights on the main channel mixed in with car content. Itll drive people to your second channel

@TheLazyBear 11 месяцев назад

Wish this video could've been an hour long

@robomurrayairsoft 11 месяцев назад

LOL. First time I've heard that one :P We actually tried to make this one NOT crazy long, as a build video could have accidentally went for an hour.

@dustinvanfossen806 8 месяцев назад

Always cover or turn over that tube you already cleaned while you're cleaning and blasting other things with air. Saves some frustration and a re-purge. Ask me how I know!

@robomurrayairsoft 8 месяцев назад

Very good point! I did have to reclean these :p

@Terminatorbart 11 месяцев назад

Interesting! 🤔

@Nontacticalboy 5 месяцев назад

Hey man, i have a set of mini nseas nvg which uses photonis XR5 or XD4, thinking about getting a new argus housing for the tubes, i was wondering if it will fit. I havent yet open it up to confirm the type of tubes its using, but wanna find as much infos as i could.

@mikeobrien7724 11 месяцев назад

I was confused when I saw you posted a video but pleasantly surprised. I actually have the same housing with L3 tubes, didn't build them myself though. Assuming the tubes you have are adjustable gain, have you ever noticed slight flickering in either tube when you lower the gain?

@robomurrayairsoft 11 месяцев назад

My tubes actually aren't adjustable gain, so I haven't noticed any flickering. The only oddity I've experienced is in - what I think - is the auto gating kicking in when I turn them on IF in an environment where it triggers auto gating. It seems like one pod powers up before the other. Minor, but noticeable. And only in a brighter environment.

@matthewclark9238 6 месяцев назад

So I'm assuming these are not Manual gain tubes ? Any videos on installing Manual tubes and soldering the wires in?

@connor56347 11 месяцев назад

QUADS

@AnthonyGugliotta 11 месяцев назад

Is this real life? Or is it a new Robo video?

@robomurrayairsoft 11 месяцев назад

Not real life. Totally the Matrix ;) Heart you, dude! I know we've said this a million times, but we still have to get together and make some content sometime (my fault - my schedule is baaaaaaad for setting things up sometimes).

@AnthonyGugliotta 11 месяцев назад

@@robomurrayairsoft not your fault, also crazy busy on my end. We will do something soon!

@trevor894 4 месяца назад

Does the gen 2 work with a standard pvs-14 retainer ring for the tube

@robomurrayairsoft 4 месяца назад

yup - same ring. It's all based on 14 glass dimensions.

@trevor894 4 месяца назад

@@robomurrayairsoft Thanks, I ended up getting a DTNVS housing in a trade to use for the build but I still appreciate the info

@__K__B__ 9 месяцев назад

I don't understand what is actually being adjusted on the goggles during the collimation phase. Can you explain that?

@robomurrayairsoft 9 месяцев назад

Great question. And sure can: Essentially collimation is the final step of ensuring that both tubes/pods are aligned in respect to one another correctly and on the same axis of vision. Missing that step - at the lower end of the problem, you'll get very slightly offset images of what you're seeing, from eye to eye. The brain largely can correct this...but it strains itself to do so...so it brings on eye strain and fatigue a LOT faster than regular nvg use. At the worse end - if it's REALLY out of wack - then you'll see blurred and double ghost images of things which is even harder on your eyes and brain, and can make the nvgs unusable.

@__K__B__ 9 месяцев назад

@@robomurrayairsoft Thanks for getting back to me, but I still don't understand what is being adjusted specifically on the goggles to move the tube into the correct position. Is there a screw somewhere that lifts one tube up a bit or something?

@robomurrayairsoft 9 месяцев назад

@@__K__B__ gotcha. It's physically adjusting the whole eye piece assembly until they match each other's axis.

@__K__B__ 9 месяцев назад

@@robomurrayairsoft Ohh, got it. That explains why there is a little hole on the ocular side of the PVS14 for a grub screw. I was wondering about that.

@cjv131 11 месяцев назад

Did I see an NNVT tube? How do you like those?

@robomurrayairsoft 11 месяцев назад

You did! There's a long ass back story to why I'm now using NNVT that I might cover at some point - but I'll say this, NNVT is better than what I was using before (as I came to find out - again, backstory). I was pleasantly surprised by NNVT quality: am I completely down with the fact that it's a chinese product? No. That said - two things: 1) we're extremely limited in Canada with what we CAN get, and 2) the technology from outside the US over the last decade has gotten VERY good. I've only had these tubes for about 2 weeks now, but overall - don't have any current complaints. It's a good option for the price point.

@cjv131 11 месяцев назад

@robomurrayairsoft wow thanks for the awesome reply. I didn't expect that. I also run NNVT here in South Africa because western made tubes are hard to get here. I love them though. Thanks for the awesome content.