Hello Darren I followed your video on RU-vid and it was great. We have the same model as yours. We have wired the from garden up but are having trouble getting it to work. Would you mind letting me know how you cut the front lawn and what instructions you have to have, to get it to work. Many thanks in advance. Best regards Rosalind Wodhams
1. Setting Up the Loop: - Connect the cable to the R connector of the station. - Lay the cable from the back garden to the front garden. - Ensure the cable returns to the L connector of the station, forming a complete loop. - Connect the guide wire from the middle connector of the station to any point on the loop. 2. Mowing the Secondary Area: - Use the app to select the option to mow the secondary area until further notice. - Once the mower starts moving away from the station, press the stop button on the machine. - Carry the mower to the front garden. - Place the mower down and press both the play and middle buttons. - The mower will start mowing the front garden until the battery is dead, then take it back to the station to charge. Note: My front and back garden is separated by a slab path, I buried the cables next to the slab edge), so I have to carry the machine to the front garden and do the job, If your front and back gardens were connected by a small lawn, the mower would be able to mow the entire area on its own without needing to be carried. I hope this long instruction can help you.
