Robotime Hand Crank Vitascope ROKR LK601 DIY Film Projector (15% Discount code: yoshiny). 

Oh my gosh, this was fun putting together! It works perfectly! Amazing how precisely cut the wood pieces are, and how well they fit snuggly together! Hours of fun! 😊

Awesome! But I hope they make more film pieces

I've taken the two sets of gear apart because of problems. Be careful about that because the steel rods will make the holes a tiny bit fatter. It went from holding really nicely to the rods slipping out of the last disk inside. It takes a few steps to get to the addition of the orange lugs. Once those are on, it will stay together well.

Thanks. I was stuck. They are truly the best to build. 😊

I just finished mine. It works great!

This is awesome. Thank you for showing the entire process from beginning to end.

Thank you so much ,i have built the train and the Clock but i do not think i could have done this camera without your assistance so thank you again. Well done.

I've put other ones together and this is the hardest so far! Instructions are tricky I've broken two pieces (and passed a few swear words🤬) because of tight fits... going to continue hopefully it will still work thanks for your video I have needed ya a few times so far!!🙄!👍

Dude, your video was invaluable in putting this model together! I've done 2 other similar ones, but watching you do it certainly sped up my completion time! There are a few errors in the video, such as 1 part was incorrectly labelled (I think it was C3 that you labelled as D3), and you didn't put the axel end gaskets on the top wheel as the instructions show, and you didn't wax several parts that the instructions say to wax, but overall this was a *very* helpful video - thanks so much for putting it together!!

this is actually insane!!! the fact it can play a video!!!

Received as a birthday gift Jan. 9, 2021. My wife and I just completed it. Your video is great but could be a little slower. We had difficulty with parts falling off so we used some glue on parts that were not moving and it worked. It was a little difficult and fingers do still hurt but we had fun doing it together and it works perfectly. Thanks for the video. PS glad they added some extra parts since we broke 2.

In the video there is a little mistake, after the installation of the lense with the piece number E10, you don´t explain how to get the cable to this piece. If you follow the video instructions will have the cable free and you'll have a problem when you install the film. That was a problem for me.

Finished mine last night! Ikea has nothing on me now! 😏

My son is a big Ink Bendy fan so i bought one of these because it reminded me of the projector off the video game and i may fabricate my own ink bendy film i should turn out good.

Thank you. I probably could not have put it together just by following the instructions. I was surprised at how may "extra" parts that came in the box.

Just completed the Gramophone and awaiting delivery of the Vitascope. It looks difficult but with the Gramophone i didnt have the aid of a video so i am hoping this video will save some sore fingers and headaches. Gramophone work very well.

Thank you so much, I just finished, but without your help I don't know if I could manage :)

Just starting mine today,it will be the second one I've built,first one was the rokr air vehicle

OK The Vitascope is next on my list. Can you do the tractor or even the airship at some time? Please.

Mc501 prime steam express my first one... Christmas present 📦.. Going to build..great video..

43:44 awesome part putting in the film and 47:47 we see a dancing chaplin.

Thanks good video , helped a lot... Some bits are really tricky. Took me all day and 3 hours last night I'm knackered. It's not even mine, my parents got it as a gift and saddled me with it , I'm gutted.

I have a problem on step 3, my parts doesn’t stay on the P8. It’s too loose and fall from both sides

I got this and am building it. But at step 2 my gear doesn't hold together nicely like yours with the metal pins. The pins feel loose and the wooden pieces are not held securely. Should I glue it?

Thank you, I've one too and it's gonna help me very much ! Is it possible to get other films for this toy ?

Wow nice

I tried to play mine and it won’t show the movie everything works just not show the movie

I've just put the wooden gear on there and I was texting it to see if it would work the motor but it doesn't. Is this something that isn't supposed to work yet or am I missing something. 🤔any help would be appreciated

Mine turns smoothly but the film won't, dunno where i went wrong :(

I (somehow) assembled the wooden gear thing to the plastic one without any issues.

I'm just gonna enjoy it through this vid because i dont have the money to buy it

돌리면 자동으로 불이 비치면서 화면이 보이는거에요?

I can't seem to get my film to roll and it's really frustrating 😭I've tried everything

thank you for your video, it was very helpful.

Thanks you so much !

This is an older video so I'm not too hopeful for a response but I just built mine tonight and the front gear that moves the film refuses to engage properly and actually blocks the movement entirely. Any ideas on how to fix it at all? I'm stuck, and I've tried readjusting their alignment

At 20:55 mines didn't connect and I literally did everything the video said to and did it for like an hour but gave up.

I had trouble with the E12 ....there was no space for it

Wow. Nice!

I won't connect to the plastic piece in step 9 i tried disassemble the bottom like you did but it's just lopside when i finally got the twothings together the bottom and frame wouldn't fit

You know if you can put other camera roll like the old camera ?

Thanks man!

Fantastic

is there a beginner's version of this kit?

does it require battery?

I am wondering if it will work with 8mm film?

Nice it looks hard

I am still having problems getting that A17 to fit in the plastic gear

Search " robotime vitascope" on Amazon and you will get it in three days. Coupons are available.

Thanks. My fingers hurt. I'm going to sleep

10:57 Are you sure cuz the parts just keep falling off

oh I have built this before

Hola es bellisimo saludame

Struggled so hard at 10:38 TnT

Can you buy other films for the Vitascope?

📽🎥🎬

I bought this a while back but haven't tackled it. I don't think I have the skills. lol

sweet >>>> رائع

It allows subtitle please.

Charlie Chaplin Morden times non seance song and dance

This is real life film projector

how do you get the diamond looking part to stick together? i cant seem to get it

Is the film 35mm?

Bro really asked where the mistake was well her ya go: get a mirror

Fatelo senza errori la prossima volta

81영사기야 ㅡ

මිලකියඅ