No video :(

Rockford Fosgate DSR1 Product Overview | Harley-Davidson Custom Audio | Fat Head Cycles

Подписаться 16 тыс.

Просмотров 29 тыс.

50% 1

www.fatheadcycles.com | 301.825.9007
The Rockford Fosgate DSR1 provides you the power of DSP fine audio tuning and integration in the palm of your hand.
This tutorial walks you through the basic connections and touches on the mobile app used to control the device.
After watching the video, please give it a "like" or "dislike" and leave a comment - we'd really appreciate it. Also, we frequently upload new videos so be sure to SUBSCRIBE to our channel so you can be alerted each time we publish a new video.
Interested in purchasing and/or installing the Rockford Fosgate DSR1 for your Harley-Davidson? Give us a call (301.825.9007) or find us online at www.fatheadcycles.com.
Fat Head Cycles is a full-service Harley-Davidson motorcycle customization and repair facility located in Frederick, MD serving the Washington D.C. metropolitan area. We are an authorized Harley-Davidson extended warranty repair facility and have a working relationship with most major insurance companies.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@hdrolling 4 года назад

You spent more time explaining how to connect rca cables than you did how to connect up the device to a Harley, if someone doesn't know how to connect an RCA then installing one of these might be out of their league. Would have been nice to see what each of the output Cables do, ie which one for lowers/ fronts/ saddlebags/ tourpack/ subs etc.

@thiagouriel2966 3 года назад

you probably dont give a shit but if you are bored like me during the covid times then you can stream all the new movies on Instaflixxer. Have been binge watching with my girlfriend lately :)

@oscarkody2753 3 года назад

@Thiago Uriel Yea, been using instaflixxer for months myself :)

@rudyjuarez82 3 года назад

And very important you have to specify high level or low level by using the dsr1 switch !

@sehd6603 4 года назад

Sorry but this video shows how to tune the DSR1 which is informative, but it shows nothing about the “installation” of the DSR1 which is the title of this video...

@Cedarburger13 5 лет назад

I tried having my local RF authorized/HD installer put this in my 2018 Street Glide special. The unit would power up, but they had no idea or desire to figure out how to tune it. Now it is sitting in my garage.

@kensmechanicalaffair 4 года назад

Wow

@collinnordman4736 4 года назад

I'll buy it from you

@R71D 3 года назад

Search for Five Star Car Stereo on RU-vid. Tuning on any DSP follows the same principles, the specifics of each unit differ. Five Star have a tuning video on this unit I believe.

@calvinsoh4994 10 месяцев назад

I have install Rockford PMX 9813 digital media receiver and stage 3 fairing and saddle bag speaker on my Harley Davidson 2013 road glide custom , can this DSR1 work ?

@terencebigt3825 2 года назад

Great video! So I’ve upgraded my audio system on my Harley with front and lid speakers. I’m using a Biketronics 4 channel amp for front and rear speakers plus a separate mono-block for 8 inch subs. Can i still use the dsr-1 for the 4 channel amp, even though it has no tuning capability? It’s just plug and play

@SmittybuiltHD 3 года назад

That male spade connector only fits the negative speaker wire, black plug, not the positive white plug. I had to cut the male spade to make it more narrow to fit the positive white plug. Would be great to actually show where the wires are connecting to. I know theres a remote input on amp but where does the other remote wire go from the dsr1?

@FatHeadCycles 3 года назад

To the remote output of an aftermarket head unit.

@murphyroaddog1 3 года назад

I have a question if you only have a left and a right input ,do you still have 8 channels out

@FatHeadCycles 3 года назад

You sure do!

@galshuller 3 года назад

hey brother, i installed a Rockford fosgate amp with 2 ds18 , and it sounds bad... went to HD to flush the radio and was told that the amp dose ot show up... do i need a DSP for my simple application ? thanks in advance ...

@Crumb_Trails 3 года назад

My RF DSP-1 will be here soon and I already have the RF system ready to be installed. Does the install differ much when installed with the RF 4 speaker, 400 watt Harley system? I have a 2020 Road Glide Special. Thank you for this video BTW.

@JPCRF 5 лет назад

Curious on where you mounted the unit?

@supakamario 2 года назад

they make motorcycle vehicle specific plugs, don't cut anything

@mmaunsell1100 6 лет назад

I have a 2018 Road Glide Special, it’s not been flashed yet, I have Hertz MLK 1650.3 Legends, with a Biketronics BT4180 Amp, lone levelers. How do I install in from radio amp speakers using these component speakers since I have parallel Capabilities so my hamper is going to drop from 180 W per speaker for per side per channel to something like 125 because I’ll be paralleling or is there a way around that with the DSR1

@timhenry8475 6 лет назад

Heavy Metal This is a pre amp item you put in. It’s wired up between your amp and head unit. So your speaker wiring to the amp is not affected nor is the wattage your getting. Also make sure you get your radio flashed. It’s super cheap and will immensely help the quality of your sound.

@R71D 3 года назад

Flash the factory head unit. Otherwise you'll be chasing you tail on a tune. DSP goes between the head unit and amps. The DSP will further refine any signal from the radio. And allow accurate eq and crossover settings for your system. You'll find that you can tune your system for excellent performance.

@irshadalikhan889 6 лет назад

is there a surround sound in this processor????

@chrisginwright9505 6 лет назад

Does the factory unit on the 2015 road glide need to be flashed when using the DSR1?

@FatHeadCycles 6 лет назад

Yes sir it still needs to be flashed. The only way to get around the flashing is to replace the factory head unit.

@chrisginwright9505 6 лет назад

Are you in Socal, can you do it?

@FatHeadCycles 6 лет назад

Unfortunatley we are in Maryland. That is a little far for you to travel. lol. Do you have a Road Glide standard or special?

@chrisginwright9505 6 лет назад

its a standard

@bluesguitarfire 4 года назад

Where do you guys mount it in the road glide special? I want to add this and one more RF amp.

@mikepuigjr 6 лет назад

Are the changes on the app happening in real time so you can use an RTA to properly equalize the system or you make the changes and then have to upload them???

@FatHeadCycles 6 лет назад

Great Question. As you move the sliders on the app the rta will reflect the changes allowing for real time tuning!

@mikepuigjr 6 лет назад

Thanks

@davidsalazar3076 4 года назад

Does this unit would work for a camry 2018 xse with a jbl stock system? Anybody?

@R71D 3 года назад

Goto Maestro's website. It will allow you to see if your specific year, make, model, and stereo package are supported.

@markclark8196 5 лет назад

What about the power ground and remote for dsp who does it get power

@R71D 3 года назад

As a general rule of thumb I have all audio components (amp, head unit, dsp, etc) share a ground. Usually through a distribution block for clean / strong connection. Power; I like to connect through a fused distro block. A fuse close to the battery is a good safety practice. This simplifies wiring at the battery, which anyone else working on your ride will appreciate.

@rfky845 6 лет назад

Where would you place this on a 2014 Street glide with a RF amp on top of the radio already?

@Kdamone42 6 лет назад

Should fit right on top of the amp depending on what RF amp you have. Rockford Fosgate TM400X2ad or x4ad is the one you should have. If you have the PBR series you need to switch it out. Not very good amps. However the 2 channel is much better than the 4 channel. That said. The unit is small enough to fit almost anywhere under the fairing.

@SpeedyPerkins88 5 лет назад

Did it fit?

@sehd6603 4 года назад

I put mine if your looking at the front of the bike on the right hand side of the radio. There was just enough space on my ‘15 Street Glide to neatly tuck the excess rca’s and the DSR1 turned up on its side to slide in there and not be stuffing wires or any of that junk

@sehd6603 4 года назад

I apologize I accidentally posted this comment on wrong video! My sorry