No video :(

Rolled-Over Trailer Rescue: Welding Repair Guide

Подписаться 110 тыс.

Просмотров 2,7 тыс.

50% 1

In this detailed tutorial, learn the ins and outs of stick welding for trailer repair. Whether you're fixing up a utility trailer, a camper, or any other type of trailer, stick welding can be a valuable skill to have. Join us as we walk you through the entire process, from preparing the materials to executing the welds with precision.
We cover essential topics such as selecting the right electrodes, adjusting amperage settings for different materials and thicknesses, and troubleshooting common welding issues. Our step-by-step demonstration ensures that even beginners can grasp the fundamentals and start welding with confidence.
Stick welding, also known as shielded metal arc welding (SMAW), offers robust welds suitable for heavy-duty applications like trailer repairs. With this guide, you'll gain the knowledge and techniques needed to tackle various welding challenges and extend the lifespan of your trailer.
Don't let those cracks and fractures compromise your trailer's integrity any longer. Watch our video and embark on your journey to becoming a proficient stick welder for trailer repair today! Subscribe for more welding tips, tricks, and tutorials.
👕 MERCH brandonlund.myspreadshop.com
🔥 YesWelder yeswelder.com/...
Use Coupon Code: yeswelder.com/...
🔥 Arccaptain Welders www.arccaptain...
Save 5% at checkout - COUPON CODE Lund23
Welding Coupons weldmetalsonli...
weldmetalsonli...
TOOLS & GEAR I USE
🔴 www.amazon.com...
🔥 MORE WELDING AND FABRICATION VIDEOS HERE:
• Welding Projects
🔥 LEARN TO WELD AND FABRICATION VIDEOS HERE:
• Learn to WELD- Beginne...
⇨ SUBSCRIBE: / brandonlund
💲 EVOLUTION TOOLS - SAVE AT CHECKOUT Use Coupon BLUND5
aspireiq.go2clo...
UK BUYERS can also use promocode BLUND5
💲 FRONIUS WELDERS - Save big when you purchase Fronius Welders using the exclusive links below.
Fronius Welder Buy online bit.ly/2X5Q4tF
Where to buy bit.ly/3dbVmt2
TransTig 210 bit.ly/2ZDxElI
💲 EMPIRE ABRASIVES - Use Promo Code LUND and new customers get 10% off their order www.empireabra...
🔥 Links to some of the cool tools you see me using 🔥
YesWelder MIG250 PRO Aluminum Multi Process Welder amzn.to/3Lgo3GW
YesWelder Digital MIG 205DS amzn.to/3L7zm3Q
YesWelder Cut55DS Pilot Arc Plasma Cutter amzn.to/3AVeYi3
YesWelder TIG250 AC/DC Aluminum TIG Welder with Pulse amzn.to/3riTich
Evolution Mag Drill amzn.to/3s0mnbI USE BLUND5 at checkout to save $
Evolution Heavy Duty 15" Metal Cutting Saw amzn.to/34gA9yD Use BLUND5
Evolution Rage5s 10" multi-material Table Saw amzn.to/3ol3eAb
Evolution 10" Multi-Material Blade amzn.to/3IWk3JF
Center Punch amzn.to/33994ua
Metal Scribe amzn.to/3idI4y6
Relton Option 1 Cutting Fluid amzn.to/3cM3vFh
Irwin Chamfer Bits amzn.to/2Sa6Ft6
My Safety Glasses (12 pack) amzn.to/2H6tdZf
Amp Bluetooth Noise Canceling Hearing Protection amzn.to/34cZciv
Chipping Hammer (the best): amzn.to/2zs3Lqg
5/8" x 1" Shoulder Bolt (EBay)
12" F- Clamps (Harbor Freight)
Graff Black Diamond Cutting Disc amzn.to/2ELiSRU
APlus Lift Pneumatic Lift Table amzn.to/30cTaiu
Plasma Cutter: amzn.to/2ZsuLQL
Welding Clamps amzn.to/33KyayS
Stick Welding Gloves: amzn.to/2L1fxOX
MIG Pliers: amzn.to/2MJ1jnQ
Metal Marker: amzn.to/2MJzImj
Respirator (fits under my hood) amzn.to/2Hss3Vk
Drill America Drill Bits: amzn.to/2RjXk2i
Metal Thickness Gage amzn.to/32Dtn2O
Welding Blanket amzn.to/31jUjo4
Transfer Punches amzn.to/32MmpH9
Portable Band Saw: amzn.to/2Hs8Mna
1/2" Impact tool: amzn.to/2X7oYC9
4 1/2" Grinder amzn.to/32HFhZe
Cordless Circular Saw: amzn.to/33adAsP
1/4" Impact amzn.to/2DcBf0S
Any commission earned from the above affiliate links goes directly towards helping to support the channel.
FOLLOW ME (for behind the scenes stuff)!
⇨ Instagram: / lunddiybuilds
⇨ Facebook: / lunddiybuilds
⇨ Twitter: / lunddiybuilds
For Business Inquiries: LundDIYBuilds@gmail.com
Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any tools or equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@BrandonLund 5 месяцев назад

$25 Aluminum MIG Conversion ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FGhSo82MP9U.html MORE WELDING AND FABRICATION VIDEOS HERE:ru-vid.com/group/PLfbf78fMz9Vol0uX2-GNc6mLi75zpqb5f LEARN HOW TO WELD VIDEOS HERE:ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ADa1I319GJ0.html AWESOME TOOL BUILDS! ru-vid.com/group/PLfbf78fMz9Vo2Cv3V5fmYlDZGpS8Hp98l

@davidbegor8709 4 месяца назад

And that's all there is to it! 😁👍

@rogertaylor8615 5 месяцев назад

Brandon always does a great job on everything that he does

@BrandonLund 5 месяцев назад

I appreciate that Roger 🙏

@Rattletrap2 3 месяца назад

"Better than factory"..........ya can't ask for more than that! Well done!

@BrandonLund 3 месяца назад

Right on!

@earlcavenaugh6459 5 месяцев назад

Nice repair Brandon!

@BrandonLund 5 месяцев назад

Thanks Earl I appreciate it!

@jimmacsuga2592 5 месяцев назад

That is quite the project, Brandon, and well done on a successful and professional repair!!! We learn so much from the way you do things and the lay out and watching and studying the project itself. Great Job!!! Happy Easter!!! Be well, be safe, be Blessed!!!

@BrandonLund 5 месяцев назад

I appreciate that! Thank you Jim and I hope you have a great Easter as well! 🙏

@olddawgdreaming5715 5 месяцев назад

Looking good Brandon. Thanks for sharing with us. That rig has been rode hard and put away wet too many times. Even more bracing wouldn't save it much longer. Keep up the good work and do it your way so it's safer. Fred.

@BrandonLund 4 месяца назад

I appreciate that Fred thank you. It's had a rough life for sure lol 😆

@rudyrivera7426 4 месяца назад

Nice repair! Brandon! Keep up the great work! ! Thanks for sharing! 👌👏

@BrandonLund 4 месяца назад

Thank you very much Rudy!

@MinionsSmithy 5 месяцев назад

Great video out and about. Shows work can be done in any setting!

@BrandonLund 5 месяцев назад

Yes! Thank you!

@donaldhalls2189 4 месяца назад

Great job, thanks for sharing, all the best to you and your loved ones

@BrandonLund 4 месяца назад

Thank you Donald! Same to you and yours!

@jayyambrovich3740 5 месяцев назад

Great work Brandon. Way better than it was when it was new from the factory. Only thought I had is that I think I would have started things in the middle with the come-along and began my welds there. Then, to the back of the trailer like you did it. I learn so much from you, love your work and videos.

@BrandonLund 5 месяцев назад

Great point! I could have welded a ring to the floor and pulled in a simular fashion in the middle, but to correct it, I would have to cut back the sides again to get to the structural metal. Usually when I try to do a little more, it ends up biting me LOL

@rickhissen1904 5 месяцев назад

Very good work

@BrandonLund 5 месяцев назад

Thank you so much 😀

@christianbos1691 5 месяцев назад

Nice job Brandon, it's not easy to fix old rubbish and make it new. But you did your best to make it functional and better than it was. If it was your choice, you would have made the side walls new but that was not the question so you did what you did. Have a great Easter weekend and greetings from the Netherlands.

@BrandonLund 5 месяцев назад

You are spot on Christian! Thanks you so much and I hope you have a great Easter also!

@russll02 4 месяца назад

Great work in a less than great situation, the use of mixed welding, stick and MiG is a good example for people to learn from. All to often people think I started with this style so that is what I have to use, also pointing out about flux for out doors was a good point to make. As always thanks for am excellent video.

@mhein681 5 месяцев назад

Great at explaining everything... thanks

@BrandonLund 5 месяцев назад

Thanks man I appreciate that!

@kylejans8160 4 месяца назад

Great video love it and all the vids you do. God bless!!

@BrandonLund 4 месяца назад

Thanks Kyle! I appreciate your long time support on the channel! God Bless brother!

@TheEagleye92 5 месяцев назад

Another great video, I’ve been binge watching your videos. Any other channels like yours you suggest ?

@BrandonLund 5 месяцев назад

Thanks man I appreciate it! I don't watch welding channels. Some of my favorite channels that I watch are 2Vintage, BadChad and Project Farm

@bazkeen 4 месяца назад

Never easy when something like that has been stressed due to the roll over. But it has came out well. 👍🏻👍🏻👍🏻👍🏻👍🏻 Other than building a roll cage for the trailer😂😂 but the client might think you are taking the piss 😂😂😂😂

@BrandonLund 4 месяца назад

🤣🤣🤣 I appreciate that Basil!

@nelsonglass6 4 месяца назад

Have you ever use a wood pipe clamp…. It allows for a more fine adjustment compared to A come along…

@BrandonLund 4 месяца назад

Thats a great tip. I have used them but I don't have one. Your comment was actually my first concern because they don't have that fine adjustment like you mentioned.

@danielchambers1958 5 месяцев назад

Nice job Sir….

@BrandonLund 5 месяцев назад

I appreciate that Daniel! 🙏

@danielchambers1958 5 месяцев назад

@@BrandonLund Happy Easter to You and Your Family Sir.

@BrandonLund 4 месяца назад

Same to you and yours! Happy Easter!

@Rein_Ciarfella 4 месяца назад

Thanks for the welding instruction. What is the purpose of placing short beads and then cleaning up after each one before going to the next one, instead of doing the entire length before cleaning up? You did this even after adjusting for heat. Just your habit to check quality often or some other reason? Thx!

@BrandonLund 4 месяца назад

When the "keyhole" starts getting too big, from having my amperage a little too high, I will let it cool to help close it up and then I clean up the slag with the grinder to get rid of any contamination before I strike my next arc. Great question! Thin metal is hard to weld because the metal starts out with the right amperage but overheats quickly.

@troubleent8326 5 месяцев назад

😊😊😊😊

@BrandonLund 5 месяцев назад

Thank you! 👍

@scottjune3554 5 месяцев назад

What are you using for flux core? Brand wise

@BrandonLund 5 месяцев назад

My usual go to is Lincoln Innershield, but for this project I'm burning up some Matheson self shielded that just happened to be spooled up on my mobile machine. Matheson is my next favorite so I keep both on hand.

@PilotMcbride 4 месяца назад

That trailer was a commercial build? GEEZ!! Those who built it should be run out of business. Cheap and shoddy. From a distance it looks quite strong, but close up it is extremely shoddy, even amateurish. My bird sh!t welds would be stronger than the original welds. (Here it comes) Shoulda TIG’d it. 😂😂😂😂 Good job Bran, thanks for posting.

@BrandonLund 4 месяца назад

Hey buddy it's always good to hear from you! We are getting a HUGE snowstorm tonight. Winter is almost over and mother nature is getting one last storm. We went motorcycle riding last weekend. It's crazy!

@PilotMcbride 4 месяца назад

The white stuff is no good for you mate, too bloody cold. 😉 We have an annual temp swing from -5C to +45C, no room for the white stuff 😂😂. From (fading) memory our lowest minimum since 1980 was about 5 or 6C and that was cold enough. Weather conditions blew the snow clouds up from our snow fields and dumped it up here and north to the mountains west of Brisbane. That was about 1982 or 3. Cheers ol’ mate

@torowazup1 4 месяца назад

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

@BrandonLund 4 месяца назад

Thank you very much!

@georgesimpson3113 5 месяцев назад

7014... rather than mig. Yea, mig is good also but you already had the stick out. Then 7024 over in bed. About what did that $?

@BrandonLund 5 месяцев назад

I haven't got with the customer yet to see if they want to add additional bracing, but to get it to what you see in the video - 2.5 hours @ $80/hr = $200.