Rollerblade Twister XT | Unboxed Preview 

Appreciate it. I have made a full(er) review discussing my skating experience if you are interested.

So far I have about a week skating on these; I want to record some video while skating, nevertheless I'll have an update soon.

The frames have a single slot. So one can't really adjust the longitudinal distance (forward and back,) however one can adjust the transverse distance (left and right.) Due to this, one may also adjust the frames so they are at a diagonal. The boot mounting plates have three holes; it appears only one is threaded and bored. I am unsure of the other holes' function. I have seen some aftermarket modifications that makes use, but otherwise just one mounting hole.

Over time the liner should 'mold' and take less internal volume, so that should work well.

Scratches are definitely annoying, though they will likely join a family of future scratches :). For beginners I think it is a very approachable hard boot, I hope you continue to enjoy them.

Thanks for that! I measure around 27.8cm and found, after some use, they are really well fitted (US Size 9-9.5.) Definitely try them on carpet if you buy them to ensure fit, but you should find them ideal.

@@seriouslyreallyserious Thanks for the reply! I am now pretty confident that I can fit in the Twister XTs as I was also able to squeeze into a size 42 Seba Wizard boot with their special Intuition liner (27.0-27.5 cm) and it was tight as hell at first but is now an almost perfect fit.

I am happy to hear that; some other videos were out there though I prefer going into detail. Skate on!

I appreciate it, I am looking to do another week of skating before I make the video. From my experience with these, you should find the 8/8.5 US to be ideal.

It would probably benefit from matching holes in the insole. So far I have found these to be warm, but that was expected. Since they distribute the pressure so well, I have not had any hot spots or blisters.

From what i can tell, size 9/9.5 US, the width is about 6.5cm or 2.75 inches wide at its widest point. They probably will not cover the entire base of your foot.

apologies for delay. i believe the difference in size is more width than length related, so the Twisters will likely be narrower. If the RB Pro boots treat you well, you likely will not gain much benefit to switch, but that will only come with trying them out.

Agreed, most will find these true to size unless you have wide feet.

Maybe a few ounces per skate; it is not a huge change like going to a carbon fiber-resin boot, but if you skated them back to back you would likely feel a slight difference.

@@seriouslyreallyserious thanks so much for response

have not tried FRs, but they are really good from what others who own them have said. I would do some research on the fit differences, I beleive FR are form fitting, moreso than the twisters. otherwise, go for whichever looks the best.

The boot and liner are both sized, following the same scheme. Mine are size 9 US, so the liner and boot are size 9-9.5 US or 270-275 mm. So far I find wearing the skate, liner and all, to be quite snug. As for wearing it without a liner - do not skate them like this - there is probably 0.5-0.75 cm of space around the foot. You may find sizing up gives more space, though you will lose a bit of rigidity and control. I say true to size is appropriate.

@@seriouslyreallyserious I am quite experienced skater, so I am looking to size down ;) I am 44 in twister 80s and liner is perfect, but shell has 1cm space. In FR skates I have even more room, like 1.5cm between liner and shell, therefore, I where thinking maybe new twister shell is more snug. Thank you.

If you mean the Twisters prior to the Edge line, I am unsure of how they compare. I believe compared to the Twister Edge these have slightly more room, though still a snug fit. For a size 44 EU, a 43/44 XT should do well. They come with foot spacers, if you need to tighten the fit.

Depends on what you plan to do. These are great skates - I have my full review up now - but you may find others to be really good: - Powerslide Next Core 90: $289 - Powerslide Imperial One 80: $220 - Playlife Aztec: $150 - FR Skates FR2 80: $289 - FR Skates FR1 80: $199 -Rollerblade RB Pro X: $219 -Flying Eagle F6S Falcon: $219 -Roces 1992: $219 (All prices in USD as of now from initial search) This is not every skate out there that I could recommend, nor have I tried a lot of skates. These all are very good hardboot skates that fill a similar place as the Twister XT. If I had to choose one skate that should work for anybody, I would probably select the RB Pro X, but I am somewhat partial to Rollerblade. Do not forget protection pads, bearing lubricant, etc.

HI Deja, I measured the widest section of my foot at about 96 mm; my foot length is about 280mm, and the size US 9/9.5 is ideal (note these are male sizes). My suggestion is if your foot is very wide, perhaps try the RB Pro X; the boot is wider than the Twister, therefore better for wide feet. If you really want the Twister - with a wider foot - size up, and use the footboard sizer if necessary. Remember to try skates out on carpet to ensure fit!

@@seriouslyreallyserious thankyou so much🥺appreciate the response!!!

Same! Did you figure out a solution? Otherwise i love them!

That's a great deal! I saw on IW's eBay site they have a Womens 9/9.5 US for around that price. Lots of skate shops too will have older models like the Twister Edge. Overall Twisters do not catch much discount used these days.

@@seriouslyreallyserious yes they had a men's 8.5 for $200 the other day. They're not selling that well they just listed a few of the 3wd ones brand new for $100 off sticker. I think either rollerblading has become a fad or a recession is coming

@@seriouslyreallyserious I think the problem is they manufacture too many. They should keep quantities low and provide no discounts. They were sold out for a while so they made too many this year, and there's a flood of maxxums coming

It is odd, some distributors are sold out, others not so. I think they should bring back two tiers of Twisters like last year, making these a bit more approachable. I wonder how popular the Maxxums will be; I was thinking of those for the 90mm frame, but I decided against this.

I have seen a ton of inline skates being sold used this year; last year the opposite. Definitely a lot of people falling into trend are hopping off. As far as how many were made, that is totally plausible. I wonder if they will do the limited colorways like they have in the past.

Noted, I think my newest video (Twister XT Review) is a bit better.