Bosch GBH 2-26E It's so dirty that you can't see the original color, It is covered with cement, glue and waterproof paint, I found it at a scrapyard...
Красота... Звезда только ему настанет в первые 10 минут работы. Ни капли смазки на гильзу... Она алюминиевая, махом нагреется и заклинит в стволе со всеми вытекающими... Специалист по покраске корпусов...
Thank you. I started fixing my drill with a different video that completely skips the small cylindrical rollers at the base of the chuck, so when I pulled out the chuck, they went flying. It was a bitch looking for them on my shop floor among a million other small bits of metal. I wish I had found your video first.
Mechanical cleaning of hardened cement damages plastic. To remove hardened cement from plastic without damage, place the plastic in acid for a day. Any, you can use strong acids too, for example hydrochloric acid. Cement will become loose. After removing cement, remove whitish stains with soda and alcohol-containing liquids for washing window glasses. For finishing, there are special reducing agents to restore the appearance of the plastic. This drill has a rather complicated device, a lot of work. Well done job.
I was so jealous to see there's a lot of machinery laying around just like that n that's something that u will not going to see or found on the scrapyard around here.
Boa amigo soi tecnico nesta area aqui em salvador-ba. E todos os ferro velhor aqui em salvador tem sucatas de ferramentas que vem de outro estado e daqui mesmo. Nos aqui nao compramos muitas peças de fabricante reapruveitamos as sucatas temos sorte aaui por isso
Great restoration work. To easily remove remains of cement, use diluted muriatic acid, and there are products that improve the appearance of plastic without the need for painting. However, if you have a paint, give preference to the original color. Congratulations!
First acid as you say to dissolve mortar, then sandblast plastic, finally heatgun to melt surface of plastic and create shiny surface. No paint needed.
I have that same drill, quite a great masonry drill for the price and for it being a consumer product. Tore out my chimney and done plenty of other masonry type work with it and it still chooches.
Ok for light work ,, get a hilti when its gets time for real work , i bought a Hilti TE-76 P ATC at the pawn shop for $200.00 and that monster runs 1' bits thru a 10 thick foundation like its butter , 4' core bit nor problem , its heavy weighs 13pus pounds , still dont mind the Bosch for light jobs .
@@johnwallace1729 Oh yeah I'll bet, never tried core bits, any time I needed one, I had to go deeper than any of the core bits I found could do so I just ended up using a long smaller bit to make the hole manually. I imagine contractors have access to more heavy duty bits than consumers get at Home Depot.
Сам, занииаюсь ремонтом инструмента и не только и плиты и т д. Но первое вижу, что четки чуть не последним снимают. Их вроде 1 снимают. А Фери с тазиком класс. Перф новый был. Только на 1 положил воду с перегедролю и все и маслом измазыл и делает ремонт.
Oye tantos taladros está bueno nada de que Tebas por Ai y te encuentras con una máquina , está mejor saber de dónde se sacó 👏👏👏 y haber como lo dejas de bonito el taladro 👍
Here you can clearly see the difference between Bosch Blue and Bosch Green, Bosch Blue mainly has an interior of metal, is therefore also more expensive and intended for the professional craftsman, Bosch Green has an interior of mainly plastic and brass, is therefore affordable for the amateur handyman.
I wonder how the careful use of a heat gun may go in restoring the plastic finish somewhat? In the same way as one works for black plastic bumpers and trim on a vehicle.
Знаете. В первой вижу блогера который восстанавливая инструмент работал с красивыми тисками всегда порожали видио где восстанавливают инструмент или ещё что то всегда тески убитые , спасибо за видио