Rotary Hammer Drill Restoration | Hilti TE 10 

This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool ru-vid.comUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.

*Good price , Heavy duty Works great **MyBest.Tools** on cement and brick work.*

Like how you didn't doll up the drill this time. Always respected a well-used piece of equipment. And that stator rewind you did... that's boss level skills, man.

TE 10... Gosh, one of the best of the best drills i've ever worked with. Light, strong, very user-friendly, great tool. For me, only one was better - TE 30...

very strong and high quality tool , i have one myself , thank you for restoring this machine!

Wow... A new shaman to follow 😃 Got a TE10 here. My baby. Cracker of concrete and as reliable as ever... And it passed away yesterday.. 😭😭😭 After nearly 35 years. Drilled a hole for the garden tap... No problem. Wanted to drill another one at a neighbor, and not a likkle sound anymore. Didn't give up. Took the back of, cleaned the start thing. Got the 3 front screws of, and didn't dare to go further. Saved your video, gonna give it a step by step try just as in the video, and wish me luck 😕 I only hope it's not an electrical issue, cause I have no clue how to work that out... Thanks for this video. Took me literally 20 seconds to find. Happy as a kid.... So far... 😃👏🏻👏🏻👍🏻👍🏻🎉

Nice repair!!💪

Nicely repaired, sir! I had never seen someone rewind a stator before. Great job!

Suuuuper Mechaniker!Respect!

So super nice work and cool content

Eu sou brasileira e também assisto esses vídeos de reparo e manutenção de ferramentas. Muito bom trabalho. Você é um grande profissional.

Nice that you redid the windings👍

Hilton,the king of hammer drills👍

I’ve still got this drill it’s the daddy. It runs on 240V in the uk. Great job 👏

Hilti very reliable industrial tools. :-)

Awesome. lets start seeing you fix some chain saws now! Always loved those restoration vids..

Impressive how mint it looks inside. Even the seal wasn't baked on or brittle!

Great full ideas

Great work 👍. Difficult part is rewinding and remembering turns.

Yay yo, really nice repair my bro. Again, good job. I learn a lot.

I've got one, 35 years old at least. Still perfect just needs new brushes

You do Restorations like air compressor and things like that. I like that things

Rewound a burnt stator, wow.

best little hammer drill. Mine is a bit worn after 20+ years but still does it's job. Just found a clean looking battery version for 30 posted minus batts and charger. Cheaper than buying all the bits I will need to rebuild the front end. Hopefully it's just a straight swap. I saw this vid just as I was starting to strip them which was good cause i got no grease and I'm not doing it twice and I can't be without my hilti, it makes me money. Thx for the vid

Just from personal experience, a screw gun or drill works better for reassembly. You can turn the clutch down to prevent stripping the screw holes, and you don’t have to worry about it hammering.

.Excellent work👍👍👍. Thanks for sharing

I love seeing your video good luck

Hi! Thank you so much for your film. It helped me a lot to release the drill from the drill head!

it's a very nice

Sekimotosan put some serious hard miles on that drill Nice Rebuild!

Woah! I never seen you rewind a coil before wow! Nicely done 👍

Great restoration, I wonder what Mr. Electricity would say about the motor winding. :)

Great job

Nice video Brother 😁

Suggestion: diesel is way better than gasoline to clean mechanical parts.

Thanks for the Video. Just refurbed my TE 10- Wunderbar! I'm old school - If you can 'Fix it'= Do IT! iF you live in Australia, & Hilti says 'IT'S' Superceded, go online, order your Brushes Etc in from Germany or wherever (2 sets including Freight & Dodgy Global exchange rate = AU$21. Bearings Locally. = Active Kit! I don't have a 'Bench Press' for Circlip reinstall - Used 5/8 W Socket & good old 'G' Clamp (Bush engineering - LOL). If you don't have a grease Syringe, 'Small' Paint brush or 'Spray grease' (Even used 'good quality' Chain lube for 'Tight places & penetration' - if your stuck-[They're Not high revving anyway]). Tried the CaCarb cleaner on plastics- Mixed success - A good over the counter Auto Degreaser works a treat, (Including Diecast Metal internals - Used a Metal rice strainer to keep all bearings & bits from being lost whilst 'Cleaning') & spray all with CRC or equiv on completion seems to work OK. Don't forget the ball bearing in External end cap on reassembly! Hand Carpentry clamp, to keep drill vertical on reassembly, if you haven't got a 3rd hand, or Vice - LOL! Really good presentation, & good to be able to Rewind on details - Some of my TE was slightly different - But close enough to experiment! Be well.

Mi Estimado Amigo Asiático, Saludos desde Venezuela!!!... Una vez más muy buen video!!!... Excelente trabajo el que realizastes con el devanado del estator que estaba hecho trizas, te felicito!!!

You can always remove permanent marker with rubbing alcohol.nice job on the retiring too.

Nice repair video, do you lubricated aluminium cylinder abd piston o-ring? It's important to do that because it will get hot, o-ring will worn out fast and you will lose hammering power...

Very good work

That’s a well engineered and built hand tool right there. The hammer mechanism and gearing are excellent. Well done on that restoration. Well worth the effort in my mind. Do you often rewind stators? I imagine rewinding armatures would be extremely difficult given the balancing issues.

I buy one this in my local pawnshop for 30 bucks, works great!! Hilti is very robust

Great video, I have the modern 22v edition of this tool. Please do more Hilti power tools. Would like to see a comparison of old vs. new, though I have a suspicion the old ones would come out on top.

great job

Awesome👍👍

hola felicitaciones haces muy buen trabajo y me has motivado hacer yo mismo el mantenimiento de mis herramientas te sigo con atención se aprende bien contigo gracias saludos desde VENEZUELA

Man you're really rewind the stator.....WOW.......JUST WOW.

Hilti made for never die!

you have great patience

Back in service. Very good.👍

Hello👋 Love youre channel nice work 👍👍❤️

i like it keep going gear show

Sweetheart and very nice

Excellent restoration video. Well done!

Sou do Brasil e acistos e vejo seus vídeos todos os dias, voçe e o melhor muito profissional

great work like usually. Next project clean the washing plastic tub :D

Nice job.I really enjoy watching your work

Hey!! Isn't that the HITACHI you restored, you are working with?

Me was first to see this video with first like and your fan

Молодец. Хорошая работа!!!

its ok KIXX grease :)). TE10 I used one of these years ago. Nice to see it working.

Excellent

Cool vid and it looked like you even used one of your previously restored drills to help

Excellent video, learned a lot to tackle my TM8

Otra muy, muy, muy buena restauración!!

Sei numero 1 bravissimo

I'm curious if it's possible to upgrade a cordless brushed motor tool into a brushless motor tool.

Superb job on the motor rewind!

Boa tarde Parabéns pelos seus vídeos obrigada. Eu desmontei uma pistola FOXLUX de cola quente e não estou conseguindo montar a mola dela.tem como me ajudar.

For one Hilti it worth the work..👍

U know i love you video when i try to restore my dad old gsr bosch drill, with missin battery, the cost i can buy new model

ما شاء الله معلم شغل كويس

BRAVO

Thats some fancy jar mixer drill adapter.

I find a metabo drill in trash the last week and it works without do anything old tool are super strong

I still use one T-10 in Every Day work. I also have one T-10A, but Ni-Cd Battery is not work, and i am thinking how to change Battery pack in Li-Ion cells. I have a brand new Hilti Drill machine but this is not in use, T-10 is working well. Timeless designe.

Good job.👏🏻👏🏻

Why no varnish for winding?

Bonjour je suis toujours impressionner de voir que vous retrouver la fonction de chaque pièce au remontage. ... J'ai démonté une visseuse et je n'est pu la ramonter car toutes la partie mandrin c'est défaite j'ai été incapable de la remontée

Hello, thanks for the video! How do I get the air piston out of the gearbox? Because I can't assemble the part. Kind regards

잘 보았습니다. 감사합니다.

Excellent clear video. By the way what was the grease you used and is it suitable for the TE2

Поршень не смазал))))до скорой встречи в ремонте с заклинившей гильзой....

This drills have a problem, in the inside of switch have a electronic plate, if the electronic plate are broken or damaged, the drill do not work and the spare parts of this tool are obsolete

Thanks sir

2:31 nice 😄

Rule #1: For disassembling collector drive, carbon brushes remove first.

Hello, I have the same electric hammer. But I have no more percussion. Do you have any idea of ​​the failure? Thank you

Not shown how to remove the bearing overlapping the rotor side, The tool recording (with shaft sealing dissasembly), and other parts from there are not removed. This is a specific tool, but a top one. Thanks

Las partes plásticas se pueden reparar?? Podrías hacer un vídeo de eso!! Saludos.

👍👍😎🍺🍕🔧🔨

Toop 👍👍🇵🇹

O cara e bom

This video gave me Breaking Bad vibes. I like it though.

Amigo de onde você é te assisto aqui do Brasil seus vídeos são muitos bons chego ate colocar colocar no status.🇧🇷🇧🇷🇧🇷

Perfeito.

Nice rewind, nut I do not think you should use the side of a grinding wheel, only front face.

I wonder what he does with all the tools he restores... I mean I know he uses some of them but he restored like 15 drills on this channel and nobody needs that many drills

It seems to be quite new inside

👍👍👍❤️