Rotopax install for the van’s FVCO equipment panel

Подписаться 1,2 тыс.

50% 1

As my lithium batteries are not heated I relay on the 1.5 gallon diesel heater fuel tanks installed under the front hood, but with extended cold a Rotopax solution was definitely needed. This video shows the fairly easy install process.
Go to www.rotopax.com for the tank, if you check the blemished inventory you can get a price break.
I bought the lock set off Amazon but in hindsight wished I purchased from Rotopax as well for improved quality

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@charlevoix418 7 месяцев назад

So, you have a complicated set up of three different tanks to feed a diesel heater: if you had choosen a petrol heater, none of them should be required because you would tap the heater fuel from the van engine tank?

@vandingo1 7 месяцев назад

Yep all true, I made the decision of budget savings and kept reading the petrol heaters were not good at altitude, compared to the inexpensive diesel heater I put in. Definitely a bit more mess with multiple tanks.

@charlevoix418 7 месяцев назад

@@vandingo1 Petrol heaters are now altitude self adjusting.

@mtc580522 5 месяцев назад

is your van diesel or gasoline ?

@vandingo1 5 месяцев назад

It’s gas, but I have a diesel heater under the passenger seat which is the sole need for a yellow rotopax. Eventually will add a red one to the panel as well.

@vandingo1 5 месяцев назад

It’s gas but I have a diesel heater under the passenger seat. At some point I will add Rotopax for gasoline.