Тёмный

Rotor Riot TANQ Build - Ultra-Durable FPV Drone! w/ Let's Fly RC 

Rotor Riot
Подписаться 276 тыс.
Просмотров 78 тыс.
50% 1

Buy the Tanq here:
Frame:
rotorriot.com/products/tanq-5...
Pro-Spec:
rotorriot.com/products/tanq-p...
Solder-free:
rotorriot.com/products/tanq-5...
Buy Let's Fly RC's new solder free motors here:
rotorriot.com/products/hypetr...
Buy Let's Fly RC's solder on motors here:
rotorriot.com/products/2306?_...
3d Printable Files:
www.thingiverse.com/thing:565...
Dump File For BetaFlight:
master
set gyro_hardware_lpf = OPTION_2
set gyro_lpf1_static_hz = 0
set gyro_lpf2_type = PT2
set gyro_lpf2_static_hz = 135
set dyn_notch_count = 1
set dyn_notch_q = 500
set gyro_lpf1_dyn_min_hz = 0
set gyro_lpf1_dyn_max_hz = 0
set dshot_idle_value = 200
set dshot_bidir = ON
set motor_pwm_protocol = DSHOT300
set small_angle = 180
set simplified_gyro_filter = OFF
set osd_units = IMPERIAL
set osd_warn_rssi = ON
set osd_vbat_pos = 14816
set osd_rssi_pos = 14842
set osd_link_quality_pos = 472
set osd_flymode_pos = 14797
set osd_ah_sbar_pos = 270
set osd_ah_pos = 2190
set osd_current_pos = 386
set osd_craft_name_pos = 14346
set osd_warnings_pos = 14824
set osd_stick_overlay_left_pos = 224
set osd_stick_overlay_right_pos = 245
profile 0
profile 0
set anti_gravity_gain = 7000
set p_pitch = 56
set i_pitch = 60
set d_pitch = 40
set f_pitch = 134
set p_roll = 53
set i_roll = 57
set d_roll = 35
set f_roll = 129
set p_yaw = 53
set i_yaw = 57
set f_yaw = 129
set d_min_roll = 35
set d_min_pitch = 40
set dyn_idle_min_rpm = 25
set simplified_master_multiplier = 120
set simplified_i_gain = 60
set simplified_dmax_gain = 0
set simplified_feedforward_gain = 90
0:00 Intro
1:48 Parts Overview
5:22 Frame Assembly
8:28 VTX / Antennas / Receiver
23:35 Camera Mounting
25:27 ESC / FC Stack
36:54 Motors / LEDs
46:06 Frame Assembly cont.
47:49 Betaflight
59:03 Binding Receiver
1:02:25 Final Frame Assembly
1:04:45 Accessories / Props
1:08:00 Outro
#FPVFREESTYLE
- - - - - - - - - -
- FPV Freestyle Pilots / Hosts -
Joshua Bardwell [Knowitall]
/ joshuabardwell
Drew Camden [Le Drib]
/ ledribfpv
Corey Tapp [CRICKET FPV]
/ cricketfpv
Jeff Orta [VORT3X]
/ vort3xfpv
Alex Vanover [CaptainVanover]
/ @captainvanover
James Hester [PDEVX]
/ pdevx
Paul Nurkkala [NURK FPV]
/ nurkfpv
Shawn Morrison [Let's Fly RC]
/ letsflyrc
Caleb Wright [BubbyFPV]
/ bubbyfpv
- Production Team -
Drew Camden - Producer
Brennan Thompson - Camera / Editor
Christian Kapper - Editor
MUSIC BY
VORT3X
/ oddbot
/ @vort3xfpv
www.rotorriot.com/?aff=1

Развлечения

Опубликовано:

 

26 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 193   
@rakr9334
@rakr9334 Год назад
Improvement Idea: During the milling of the aluminium cage you could add some markings on the cage for the cam angle. Markings from -10° to 60° - long marking for the 10ers, short marking for the 5ers
@_bulldogfpv_
@_bulldogfpv_ Год назад
That's a sweet idea. I wonder if I could laser them myself...🤔
@grampafpv
@grampafpv Год назад
The addition of an exploded view of this frame would make assembly way easier than trying to comb through a video. Thanks
@propabilityfpv
@propabilityfpv Год назад
Its so irritating when there's no antenna protection, no room for a strap, and TPU-only arm protectors that grind off in 10 seconds. You addressed all of those things, awesome design dude 👍
@fxrc3086
@fxrc3086 Год назад
This frame looks amazing and is perfect for the new 03 air unit. Hopefully it comes back in stock soon. Thank you. Love ur work my friend 👍👍
@elelnoel5196
@elelnoel5196 Год назад
"More time Flying and less time repairing." - I'm sold.
@StacemanFPV
@StacemanFPV Год назад
Lots of good build tips for any frame/setup in here. Well done!
@barry_dalive
@barry_dalive Год назад
I’m going with an entirely different configuration, but this was incredibly helpful getting orientated for my first build. Thank you so much!
@TRexHeliPilot
@TRexHeliPilot Год назад
Thank for sharing the tune for this setup. Just built mine this weekend and it flys amazing!
@bluefpv3263
@bluefpv3263 Год назад
can you help me with importing the tune i never did this before and if i put the cli dump from the vid description into the command line nothing happens
@DanielLeeDrones
@DanielLeeDrones 11 месяцев назад
Awesome build vid. I learned a lot about building in general (glad to know I am not crazy for liking 1000uf caps on my builds and especially how you just drove through the betaflight setup so quickly without seeming rushed. Great content.
@ChrisRiley3D-Everything
@ChrisRiley3D-Everything Год назад
Update! so i got this frame and love it. wish it had mounting holes in rear for normal VTX instead of DJI crap but i understand. i did put a 20x20 stack in it by using a adapter plate. i am flying it in 3D like ZOE FPV and using bi blades and i must say it is one of the best handling quads i have ever flown. i Don't think i will ever fly another frame but this one. it fits all my needs. Brother you did an amazing job with this one. Thank you very much. For anyone thinking about getting this frame , think no more and just get it. You will be a very happy camper!
@ecoaventurasdelistmo
@ecoaventurasdelistmo Год назад
this is the most sincere rotor riot video i have ever seen
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs Yand. That means a lot. :)
@DreamFlyEcuador
@DreamFlyEcuador Год назад
Best looking RR drone right now!
@Mr748Dave
@Mr748Dave Год назад
Great build video Shawn! Love the TANQ!
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs David. :)
@Rhoskins77
@Rhoskins77 Год назад
Just finished building mine yesterday and i LOVE it. My DIY kit was missing some of the 3d printed parts (ESC/FC spacers, foot protectors, and a few 3d parts that i believe were for a different VTX setup than what i ordered), but luckily i have a 3d printer and was able to re-create them on my own. i also made a custom mount for the DJI 03 VTX that holds the O3 VTX and the radiomaster ExpressLRS reciever that came wired to my flight controller, that i think works amazing. there is a VTX mount on thingiverse that you can print, but it doesnt let the air unit breathe at all, so i would think it would be much easier to overheat. Mine also has space for the SD card and USBC port to be easily accessed, which is something i have seen alot of people complain about with the O3 not having mounting holes, and having to tape over these areas. Im also working on a custom camera mount that will allow for a 20mm x 20mm piece of plexiglass to be inserted infront of the O3 camera. (i crashed and a piece of dirt/rock was kicked up into the camera leaving a small scratch, so hopefully the new mount will allow you to just swap a 50 cent piece of plexiglass instead of getting a new camera) Lets Fly RC: Id love to connect with you and share my 3d prints for your quad, i have a lot of ideas for this thing. im also a mechanical engineer so i can contribute effectively to design challenges/mods. Thanks for making this frame man, i absolutely love it.
@george8966
@george8966 2 месяца назад
Sean, do this again but move the arms towards the front of the quad instead of down to reduce the width of the quad. You could use servos on the arms. Would be pretty cool.
@El_Dimih
@El_Dimih Год назад
Excellent ! I love that!
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs Philippe
@SprayerFPV
@SprayerFPV Год назад
Man that’s one pretty quad
@codecae2
@codecae2 Год назад
Shawn! Bravo on some of these very thoughtful design considerations! Maybe one day I'll be able to get back into the field again and fly one. Miss flying with folks in Orlando. Been too long....
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs Curtis. Yeah. Definitely miss hanging with the old crew
@South-Texas-Drones_5801
@South-Texas-Drones_5801 Год назад
Just ordered mine yesterday I can’t wait 😜
@genesisfpv
@genesisfpv Год назад
Great build! Definitely made me re-think my next one 😁👌
@ShawnG_FPV
@ShawnG_FPV Год назад
WOW super awesome and informative build, cant wait to build mine!
@rickm1283
@rickm1283 Год назад
Great video Shawn!
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs Rick
@paulgeorge2099
@paulgeorge2099 6 месяцев назад
Love the color combo and the 8mm arms!!! Great minds think alike. That is definitely gonna be my next frame. I don't care about weight because i never fly with a go pro. I fly for me and me only. I got ride along goggles if someone actually goes with me.
@LochnessFPV
@LochnessFPV Год назад
Just Amazing! It would be nice to see this available to buy in AU. Imagine a Micro 3" TanQ what could do!
@danielson101
@danielson101 Год назад
Nice Job!
@flyineyeaerialfpv5592
@flyineyeaerialfpv5592 Год назад
You and Drew are the shit. Love your laid back personality and easy explanations. I will be investing in your frame for bando bashing. You didn't steer me wrong when you said the skyeliner was a tank. Im betting this frame is even more rigid than the skyeliner. I like the arm ends and how ridiculously thicc those arms are hahaha...I wish this project well man. Hope you move lots of units. Thanks for being genuine. Be easy bruh
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs Flyin Eye. Yessssssss thiccccccc. 😂
@peteschannel508
@peteschannel508 Год назад
Very cool, wish I knew my way around the electronics like you do.
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs, Pete. It comes with time. :) Watch a ton of build videos and you will catch on.
@peteschannel508
@peteschannel508 Год назад
@@LetsFlyRC will do!!
@isaacberry2808
@isaacberry2808 Год назад
Man, I thought the CL-1 was a tank! This thing is thick!!
@AxxieFPV
@AxxieFPV 10 месяцев назад
Mine is out for delivery by USPS now! Can't wait to start my build!
@rubinhodrone9204
@rubinhodrone9204 Год назад
Passando pra prestigiar aquele super Like Tmj
@andreastornesel8404
@andreastornesel8404 10 месяцев назад
After 6 months, still in love. My geprc mk5 is also a gem, but the lowe weight that supose to make it fly better..I think they feel the same. So the Tanq is what gets flown❤
@dan71559
@dan71559 5 месяцев назад
What do you think about this frame for 8s?
@andreastornesel8404
@andreastornesel8404 5 месяцев назад
@@dan71559 it would be a monster
@BODALLY
@BODALLY 7 месяцев назад
Well I just got mine and built it soon has it arrived to the uk :) its awesome build quality and went together really nice . I fly bando only lets see how it holds up it should be fine be the looks of it . Only thing I changed was stack screws to 22mm to space my flight controller away from the esc a bit more so the esc cable doesn't rub :) .
@LilwickedFpv
@LilwickedFpv Год назад
Keep up the great work
@LetsFlyRC
@LetsFlyRC Год назад
thanQs Lil Wicked
@michaelwhouse46
@michaelwhouse46 5 месяцев назад
"hugging" as in hugging those branches 😉
@FlyZoneFpv
@FlyZoneFpv Год назад
Awesome frame Brah! 🤘🏻👊🏻💪🏻
@LetsFlyRC
@LetsFlyRC Год назад
ThanQs Flyzone
@jiatan_fpv
@jiatan_fpv Год назад
@Lets Fly RC Heat shrink your capacitor leads, they're near the frame and could make contact in a crash..
@LetsFlyRC
@LetsFlyRC Год назад
Great tip. I have not needed it, yet, because the capacitor is zip tied in place. But, I should have mentioned that in the video for others.
@caseyfpv
@caseyfpv Год назад
🔥🔥🔥
@garylawrence4youtub
@garylawrence4youtub Год назад
SHAWN YOU ARE AN EINSTEIN.... YOU THINK OF EVERYTHING... CAN'T WAIT TO GET YOUR TANQ!!!!
@DavidTechEs
@DavidTechEs Год назад
Will the custom cable for the T-Motor FC to Walksnail work with the O3? I have that FC and the O3 and I'm wondering if I could use that cable, thanks
@Zoey_the_Rat
@Zoey_the_Rat Год назад
Autonomous buzzer is a must, I'd say
@robertyoung534
@robertyoung534 Год назад
My 5 inch frame has white and I'm changing it to purple and green thanks I wanted to see what it looks like when it's together 👍
@Flumphinator
@Flumphinator Год назад
Mine just came in the mail! I have no idea what I’m doing. Edit: is there like a diagram or anything? Double edit: it slips together real easy once you figure it out. Cool design.
@afterburnerrc6333
@afterburnerrc6333 Год назад
Great build video! Could I get away with using a 50A ESC on this build? The Rotor Riot site states 55A but it seems 50A would be OK?
@quadsquadfpv2476
@quadsquadfpv2476 Год назад
Hey Shawn, awesome frame man! Do you guys make a GoPro mount for this frame?
@South-Texas-Drones_5801
@South-Texas-Drones_5801 Год назад
I have a sky liner mk3 but I definitely want this one as well, is there a good 2 blade prop? seems like the ethix pb&j props are too long.
@akitaishi
@akitaishi Год назад
How heavy is the AUW ? The whole quad looks beefy !
@AedeneDuGuay
@AedeneDuGuay 2 месяца назад
Just bought this from the RTF kit. Do the PIDs have your tuning out of the box?
@NHO-RC
@NHO-RC Год назад
What about the new O3 air unit?
@Cooperjan75
@Cooperjan75 Год назад
Yea would like to know too
@BODALLY
@BODALLY 7 месяцев назад
hi pal is there a reason you use dshot300 and 3.2 pid loop?
@ericwilson8081
@ericwilson8081 10 месяцев назад
Just ordered mine Saturday was wondering I am new this will be my first real drone… could I use a 3s if I find the 6s to be to fast for me? Thanks in advance
@codywitt2200
@codywitt2200 Год назад
What about the new O3O??
@LetsFlyRC
@LetsFlyRC Год назад
Unfortunately, I didn’t have one when this build was recorded. It will fit, though. No problem
@Warchild-Media
@Warchild-Media Год назад
I NEED A TANK FRAME SO BAD....IWILL NOT REST UNTILL......BEST FRAME EVER!!!!!
@klutchedout
@klutchedout 6 месяцев назад
I have a DJI fpv but trying to get into real fpv please let me know where you list your quads if you decide to I’ve had a bunch of DJI drones but just got this fpv and I’m in love with the goggle life
@bigbino9663
@bigbino9663 Год назад
Was on the fence about it then Rotor Riot hit me with the $60 off and yea just got it.
@hyunglau
@hyunglau 6 месяцев назад
I love my Tanq. I want to change it to walksnail,but im not inclined enough to do it on my own. I bought the analog version before I entered the walksnail world
@dan71559
@dan71559 5 месяцев назад
What do you think about this frame for 8s?
@jamesmason7124
@jamesmason7124 4 месяца назад
I thought that you were supposed to have the props turn away from your fpv camera, so you bounced off of things and don't spray grass and rocks into your camera
@chrisadorno424
@chrisadorno424 3 месяца назад
I just bought your 3D prints for 03 camera mount. Any install instructions? Seems to be all friction fit.
@martinkorinek5489
@martinkorinek5489 Год назад
My Tanq frame arrived today, already assembling it. I went for O3 and bought O3 conversion kit but to be honest I am missing some closer info how it suppose to be mounted - especially the smallest two parts in the conversion package, what are they? Are they complementary stands for the antenna mount, it has the same cut angle...byt why not to have it as one piece? BTW why DSHOT300 and not DSHOT600? And lastly I did not buy those TPU motor spacers, since I did not find them on RR website!...I guess my best option now is to grind 1mm off of each of those 16! screws...Why do you not sell the spacers?? Thanks.
@fluoxethine
@fluoxethine Год назад
GoPro's rear screen will break if hit from the front. LiPo's edge will crush it.
@LetsFlyRC
@LetsFlyRC Год назад
Not with my mount. (I mean, it will eventually) I have been redesigning GoPro mounts for years trying to protect as much as possible. This mount has done the best job so far at keeping them from breaking.
@willpowerfpv3246
@willpowerfpv3246 Год назад
Really cool frame, Shawn! I know you're not particularly worried about weight, and I remember you talking about saving weight in other areas than the frame in your other video, but just curious what is the auw of your completed DJI rig? And what size lipo do you fly with? Sorry if you mentioned it in the video, I'm at work in the bush, and I can't stream the entire thing right now.. Cheers! ✌️
@LetsFlyRC
@LetsFlyRC Год назад
I didn’t weigh the fully built dji build, but, my walksnail build auw is 744g
@willpowerfpv3246
@willpowerfpv3246 Год назад
@@LetsFlyRC Sweet, I appreciate the reply. That's not unreasonable. Congrats on the new frame...personally, I think it's the best in the Rotor Riot lineup now. 👏👏👏
@xwings
@xwings Год назад
Dear Editor Guy! The said soldering iron temperatures was in Celsius, when Let's Fly RC said :P
@LetsFlyRC
@LetsFlyRC Год назад
Yeah. That was my fault. Sorry
@hirusthehellhound
@hirusthehellhound 9 месяцев назад
Is it this one that bardwell throttled into the ground to mesure g force
@martinjensen2362
@martinjensen2362 Год назад
which frame can you use the dji 03 on?
@dan71559
@dan71559 5 месяцев назад
What do you think about this frame for 8s?
@jamesshields5958
@jamesshields5958 3 месяца назад
Hi! Which .stl file are those antenna mounts? I can't find them on Thingiverse. Thanks!
@Duutse1
@Duutse1 Год назад
Wow, are you seariously using super capacitors? A 1000 farad one? Where do you even get ones so small and able to take 6s voltage? I thought normal electrolytic and ceramic ones are better for voltage smoothing..
@LetsFlyRC
@LetsFlyRC Год назад
SuuuuuuupernDuuuuuuper Caps, actually. I formulate them myself in my mad scientist lab. 😂
@lordsinistra1473
@lordsinistra1473 Год назад
How do you install the DJI 03 Air unite into the tanq
@POLARISFPV
@POLARISFPV Год назад
The arm thickness war is getting kinda ridiculous! 8mm geez!
@MizanChen
@MizanChen Год назад
The pink chrome homepage😅
@omarm7936
@omarm7936 Год назад
Building a similar drone with the same frame. This is also my first build and I am having difficulty finding cameras that will fit this frame. Does anyone have a few options? Also if there is any printable parts for installing a Foxeer razer mini 1200TVL?
@patrickyouells455
@patrickyouells455 Год назад
where do you get the led lights from? anyone have a link?
@TorontoFPV
@TorontoFPV Год назад
Nice when's the flight video?
@LetsFlyRC
@LetsFlyRC Год назад
It is on my channel. :)
@paleogeology9554
@paleogeology9554 2 месяца назад
Why not design a simple antenna and wire case for the receiver so you can mount it safely and securely on the bottom of the drone vs under the electronics so you get a better transmission signal.
@taichoubob5735
@taichoubob5735 Год назад
What was your decision to go for the Walksnail System over the DJI system? I'm really curious about your reasoning since i'm torn between the 2 :).
@LetsFlyRC
@LetsFlyRC Год назад
Nobody believes me, and everyone says I am a shill, but, I honestly have better range and penetration with WalkSnail in every environment. As long as you use the correct antennas on both goggles and drone, the WalkSnail system goes the distance. I also love the goggles. I stick with it because it performs the best for me. I have all systems, Dji, hdzero, walksnail, analog, dji O3 and I go back and forth, but, lately, I keep going back to WalkSnail.
@ShawnG_FPV
@ShawnG_FPV Год назад
@@LetsFlyRC Speaking of antenna where we're you able to pick up those OCP antenna, thanks ShawnG
@bluefpv3263
@bluefpv3263 Год назад
how do i import the cli dump if i just put it into the command nothing happens
@bobsastrophotography7812
@bobsastrophotography7812 Год назад
Any way to buy a kit that has everything included rather than buying all the parts separately? Let me know. See I custom build computers but now y’all are getting me interested in building drones. Let me know if costs. Thanks & Happy Flying….
@ryswe
@ryswe Год назад
What's the AUW?
@alexwalter2476
@alexwalter2476 11 месяцев назад
Can we get a tank 3.5?
@Createdbydub
@Createdbydub Год назад
Please release the dead cat arms. I’m waiting to make the purchase for my o3
@LetsFlyRC
@LetsFlyRC Год назад
Unfortunately, it will be a few weeks. 😢
@Createdbydub
@Createdbydub Год назад
@@LetsFlyRC ok cool thx. I’m definitely grabbing one
@Mr_CrowFPV
@Mr_CrowFPV Год назад
I prefer to hit things lol
@LetsFlyRC
@LetsFlyRC Год назад
Harry said the same thing early in the comments. 😂
@emugash
@emugash Год назад
Is this a 4S or 6S drone? or is it compatible with both?
@LetsFlyRC
@LetsFlyRC Год назад
Both. Motors make the most difference for battery voltage
@creationlabsinc.189
@creationlabsinc.189 Год назад
03 compatible? About to switch everything over on frames that can adapt well. Camera mount is my only concern
@martinkorinek5489
@martinkorinek5489 Год назад
I have exactly the same question... :)
@LetsFlyRC
@LetsFlyRC Год назад
Yes, it does fit the O3 system without issue. It will show the frame a bit on the sides unless you print a custom 3d print that pushes the camera forward more, but, that unfortunately takes away a lot of camera protection. I am working on a solution.
@greaterbostoncriminaldefense
@@LetsFlyRC Just built this with the 03....It fits, but the camera is extremely tight in the mounts. Wasn't sure if any solution may provide for a little more room between the mounts. Feels like they could be shaved down a hair.
@LetsFlyRC
@LetsFlyRC Год назад
@@greaterbostoncriminaldefense yes. It is very tight - it was optimized for 19mm wide cam - dji is 20mm. I have a new mount for the o3 on my thingiverse page that u can print that keeps the frame out of view. Or my buddy, Julian over at noozle3d can print one for you. It will be added to the rr store as soon as they finish being printed.
@greaterbostoncriminaldefense
@@LetsFlyRC Just got and installed the O3 mount from Noozle3D. It fits and works perfectly. Took the cage completely out of view. At first I wasn't sure how to install, as it didn't have screw holes, but the way you have set this up works even better. Just took me a minute to figure it out. Works great!! Thank you.
@dericklong6191
@dericklong6191 10 месяцев назад
I just 3D printed a drone last night 9 hour but it turned out bad 👎 all though the file I bought off cults 3d looked good it's just horrible. Do you know how I can get a good 3d printable frame file?
@patrickyouells455
@patrickyouells455 Год назад
does this frame support the O3 Air Unit?
@LetsFlyRC
@LetsFlyRC Год назад
Yes
@fpvgiggles
@fpvgiggles Год назад
Is this like a re-release of this video? Haven't we seen this frame already?
@LetsFlyRC
@LetsFlyRC Год назад
I made the “talking head video” on my channel. Glad you got to see both. :) this is the build video to help people succeed in building it the way I do.
@Vittalb461
@Vittalb461 2 месяца назад
just make an 8s cinewoop at this point (jk) this was crazy
@DinGuSco
@DinGuSco Год назад
What is your AUW?
@LetsFlyRC
@LetsFlyRC Год назад
My auw with all my crazy tpu and heavy hero11mini and 1300 6S battery is 838, but, you could build it without all the bulk and no action cam and get auw of 584
@ntorres1966
@ntorres1966 Год назад
Better to have a washer on the bolt to the camera to spread out the pressure. Just saying dude.
@LetsFlyRC
@LetsFlyRC Год назад
You mean the fpv camera? Never needed a washer in 3 years of flying this same soft mounted camera design in the skyeliner. It never even moved, slipped, wore out, or lost its angle.
@Parkwad
@Parkwad Год назад
Is this compatible with the DJI Googles V2?
@LetsFlyRC
@LetsFlyRC Год назад
Yes with the vista, and it is also compatible with the O3 air unit and the Goggles2
@SlamDunc_FPV
@SlamDunc_FPV Год назад
When will the 3D parts be available?
@LetsFlyRC
@LetsFlyRC Год назад
They are all on thingyverse on my page, and they are being added to the RR store a little at a time as they print them and add the listings.
@SlamDunc_FPV
@SlamDunc_FPV Год назад
@@LetsFlyRC awesome!! Thanks for the update!
@bradgibson1976
@bradgibson1976 Год назад
Shawn can you create a violet colour chin spoiler thingy please and send to Julian. In petg if possible please 🙏
@rampletero13
@rampletero13 Год назад
Wonder what's gonna happen with RR now that Rcat is selling them
@LetsFlyRC
@LetsFlyRC Год назад
Hopefully, it means RR will have more money invested to allow us to to more cool stuff. :)
@IpokeSmot420
@IpokeSmot420 Год назад
As much as I want to like this frame, I cannot. It will not fit the 1w hdzero vtx unless I run individual esc's or a 20x20 fc in the rear. It would've been my daily if it was a dual 30x30 mount. As you said, why skimp on the lightest part of the build? Add a little more in the rear for that hdzero 1w, and you will open yourself up to a lot more pilots. That's because there are not many frames of this caliber that can fit the 1w vtx.
@DivisionRc
@DivisionRc Год назад
o3?
@fluoxethine
@fluoxethine Год назад
Why not GoPro 11 Mini?
@LetsFlyRC
@LetsFlyRC Год назад
I didn’t have it yet when I filmed this. If you look up my video on my channel, I have the 11mini in that video.
@bbblllaaaj
@bbblllaaaj Год назад
Is your shirt available is the RR store? Lol jw.
@LetsFlyRC
@LetsFlyRC Год назад
I need one of those, don’t I? 😂
@bbblllaaaj
@bbblllaaaj Год назад
@@LetsFlyRC i definitely need one 😅
@arefinahsannihad5308
@arefinahsannihad5308 Год назад
What is the name of frame??
@TheRaccoonFPV
@TheRaccoonFPV 2 месяца назад
I wonder
@notsure1502
@notsure1502 Год назад
8mm ARMS! 😆
@bradgibson1976
@bradgibson1976 Год назад
🎉🎉🎉🎉 I ordered 3 in 03 lettssßssssss gooooooooo 🎉😂😂🎉😅 TANQ4DAWIN
@bluehawk2051
@bluehawk2051 Год назад
need a really cheap kit for recon in the Ukraine for all of us to make and send over there
Далее
The SkyLite - A 3-inch Whoop BEAST! - BUILD
1:00:26
Просмотров 79 тыс.
6 Ways to RUIN Your FPV Drone!
17:07
Просмотров 146 тыс.
Задержали в аэропорту
00:56
Просмотров 48 тыс.
Thank you 3M❤️
00:14
Просмотров 678 тыс.
How many plants do you need to breathe?  TESTED
27:44
Просмотров 2,6 млн
Does This Make Drone Tricks Easier?!?
20:54
Просмотров 80 тыс.
The Best FPV Drone under 250g // Build
23:09
Просмотров 11 тыс.
Making another pickproof lock (but better)
15:14
Просмотров 2,5 млн
Absurdly Cheap vs Expensive FPV Controllers
15:30
Просмотров 22 тыс.
Can a Solid Wood Airplane Actually Fly???
27:58
Просмотров 2,1 млн
ЭКСПРЕСС разбор стиралки
0:39