Routers - 7 Important Things You Should Know

Подписаться 549 тыс.

Просмотров 1,2 млн

50% 1

Support What We Do at The Katz-Moses Store lddy.no/stih
Woodworking Routers are so versatile but there’s lots of things to know for safe and effective operation. I’ve rounded up the 7 most important tips and tricks for routers and put them in a concise and easy to understand format. We talk about everything from bit direction, edge guides, jigs and buying advice. Leave your favorite router tip in the comments. Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
Read the blog on this video: kmtools.com/blogs/news/top-8-...
----
Support What We Do at The Katz-Moses Store lddy.no/stih
Dewalt 1.25HP DWP611 - amzn.to/34bAxLF
Dewalt 2.25HP With Plunge Base Kit amzn.to/3gFF8g0
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off (My favorite bit is #*Astra Coated* UDC9112)
*Want to learn more about Routers? Check out this playlist -* • Woodworking Routers, U...
Router Bushings lddy.no/z7ev
My Favorite double Sided Tape lddy.no/g2ht
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
Taytools is my favorite woodworking tool source: lddy.no/e90a
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block : lddy.no/stih
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: lddy.no/stir
My favorite Dozuki dovetail saw - bit.ly/SuizanSaws
My favorite Ryoba saw - bit.ly/SuizanSaws
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: bit.ly/SuizanSaws
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Musicbed SyncID:
MB01QOHH9JQVBHM

Хобби

Опубликовано:

27 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 382

@katzmosestools 2 года назад

*Support What We Do at The Katz-Moses Store* lddy.no/stih *Dewalt 1.25HP DWP611* - amzn.to/34bAxLF *Dewalt 2.25HP With Plunge Base Kit* amzn.to/3gFF8g0 BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off (My favorite bit is #*Astra Coated* UDC9112) *Want to learn more about Routers? Check out this playlist -* ru-vid.com/group/PLWpKyJXgeoFGOQtgnJ1r1ttKhVzYaomXT *Router Bushings* lddy.no/z7ev *My Favorite double Sided Tape* lddy.no/g2ht

@Luke-lg1cc 2 года назад

10.25 Plunge base*

@hokieinidaho 5 месяцев назад

Coupon code only taking 10% off bits& bits

@WVgunfun Год назад

One of the few guys that provides valuable information without killing me with crappy music. Keep up the great work!

@garystrittmater8258 Год назад

As a shop teacher, I teach my students, "You read left to right, you should router left to right" when the router is in front of the board with very few exceptions! I teach them to move fast and nibble across the grain and go slower routing with the grain, and other router techniques. Have never had an accident teaching 7th and 8th graders!

@colelangford6369 Год назад

My life would be a lot different if someone had taught me woodworking in the 8th grade. That’s awesome. Thanks for the tips.

@Leadership_matters Год назад

Teaching 7th and 8th graders how to use power tools is insanity and you deserve statues built in honor of what you do. Maybe an award from the president.

@colelangford6369 Год назад

@@Leadership_matters Yes sir, I agree with this man. Gotta be a wooden statue. Mahogany maybe.

@frikyouall 10 месяцев назад

Has your injury ratio changed in the last 9 months? Usually Murphy's Law kicks in when you say something like that.

@michaeltesta6129 5 месяцев назад

Any room for a 46 year old 8th grader? I just want to take you class... lol

@Hansenomics 2 года назад

The single most important thing a person can do before using a router is to watch this video! 😎

@youtukang 2 года назад

👍

@jpsjpsjpsjps Год назад

@@youtukang yv

@bonganimkhwanazi5097 Год назад

That's true

@carpentryfirst3048 День назад

I disagree. I think the most important thing to do in almost every case is to stroke the hog. " you are either living in post nut clarity or in pre nut delusional". Don't love your life in delusion. One love

@DaveJHarry 2 года назад

Loving your right hand rule, because being unsure of the correct direction is always a thing unless it's on the table, from the right. For handheld/plunge routing, I made my own mnemonic: CIAO. Clockwise Inside, Anticlockwise Outside. Get it wrong and you can say "ciao" to your work. I hope this helps someone.

@donwilliamson7984 3 месяца назад

I wish I would have found this video sooner, after years of difficulty with performing routing. Have greatly improved my woodworking. Thank you

@davidwillett53 9 месяцев назад

I'm used to larger, corded routers ru-vid.comUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.

@robertbamford8266 2 года назад

Aha! The right hand rule. Not just for electricity and magnetic fields. Thanks for the video!

@osvaldocristo 2 года назад

As an Electrical Engineer for more than three decades, I always used the right hand trick for router applications too - it was borrowed from my Electromag classes. Despite I always used it I never considerred it was important also for non Electrical Engineers. Congrats to bring that to all.

@cristovalencia148 2 года назад

Woah your last name is my first name

@cristovalencia148 2 года назад

Never in my life have I met another Cristo

@MrThenry1988 Год назад

I have 3 now. Always learning new thing and buying more for them. I need a router table now. Good work.

@David-hm9ic 2 года назад

Honestly, I'm not cheap; just thrifty. My Scot heritage comes through at every opportunity. For 35 years of occasional router use I kept telling myself that high speed steel was good enough for what I did with a router. Wood got more expensive and I wanted better quality outcomes. Thanks to you and others like you, my standards are better these days and I don't dare risk $7.00 or more per board foot lumber on anything less than Freud or Whiteside bits and the Bits&Bits coating ROCK. I watch my expenses by not trashing nice wood. Good tools are less expensive than damaged raw materials in the long run.

@riaanfranzsen9499 Год назад

The way you explain is SOOO awesome! Thanks for that!

@xavyerserrano3837 Год назад

New here , getting into woodworking at age 22-23 love the content and advice. Please keep up the knowledge sharing

@dogface706 3 дня назад

Absolutely genius idea for a jig, bro 👌

@Damon_Barber 2 года назад

Saving this video as it contains a wealth of great info! I absolutely LOVE the right hand thumb rule. That is going to save so much time trying to remember which way is the bit spinning and which way do I feed the board!

@stradicfanatic 2 года назад

I am so glad i found your channel. Love the way you explain and teach for newbies like myself. Thanks!

@chm1701 2 года назад

Fantastic tips, Jonathan. These will definitely help when making a router purchase this year. As a side note, I’ve just received my 6:1 ratio dovetail guide today. It came a lot faster than I thought too; less than two weeks from California to the UK. It’s to go with my 8:1 dovetail guide, my alignment board and my apron, which is fantastic by the way and superb value for money. Thanks so much and keep up the great work 👍

@andrewbrown8148 2 года назад

Great info, Jonathan~! I'm working on a display case project that requires some 1/4" stopped dado's on the inside faces and I was brainstorming the best way to accomplish it. Your dado/groove jig tip is just what I was looking for, so perfect timing. Thanks so much for this video~!

@pat_link_ 2 года назад

Best advice from the man in the know. Thanks for sharing the great video, Johnathan. I hope you and you're family are doing well.

@woodpallettime 2 года назад

I’ve learned so much from this guy. Everything is clear and easy to understand! Thank you!

@mrnobelnigel 2 года назад

Great overview and advice for router users. Very clear explanations. Thanks for sharing 👍

@mdkdesigns6098 2 года назад

Great info and very timely--only done a little router work so far but have a bunch coming up and this answered a few questions I had. Cheers and keep the vids coming!

@Nicool333 Год назад

Beginner woodworking enthusiast here. Just want to say thank you. This was really very helpful.

@MortimerSugarloaf 2 года назад

When he said he was going to kiss us goodnight, I didn't realize he meant it literally. About 5 minutes ago I heard a knock on the door. I opened it, and there he was. Our eyes met. He stepped forward. I stepped back half a step, unsure of what to do or how to interpret what was happening. The look in his eyes was reassuring. There was nothing sensual about it. He was just a man fulfilling an innocent goodnight promise to a loyal, but very confused viewer. I took a tentative step forward. We embraced briefly. Our beards locked like velcro. We shared a nervous laugh as we each freed our faces from the grip of the other. I managed few halting words. "Um...uh...goodnight, Jon...I guess." More a question than a statement. He turned and walked off into the night without a word. It was the weirdest night in the shop I ever had.

@katzmosestools 2 года назад

🤣🤣

@maxgilbert18 2 года назад

Funniest thing I've read in a while

@micheldecker95 2 года назад

„Our beards locked like velcro“. That part had me laughing out loud 😂

@winty2721 Месяц назад

Just bought the corded Mikita as it was better for my budget. I’ve been searching for decent videos of how to use this tool. The content within this presentation in my opinion was excellent. It gave me a great idea where to start. I have to cut some rebates and couldn’t get my head round how to go about it. Well done and thank you.

@0ddSavant 2 года назад

What a simple and intuitive way to think of router bit rotation. Thank you

@timothydaniels504 2 года назад

This video has answered so many questions that have kept me from using my router. Many thanks for your help.

@lancew3363 2 года назад

Love the hand trick! I always have to stop and think about it for a minute.

@supercuda1950 Год назад

Nice to see recommendations according to personal experience rather than paid sponsors. We novices need help choosing our tools to avoid either buying too much or too little. Like most tools, routers are fun to use but a wrong choice can make their use either a pain or results not what we wanted. Your video is very informative and gave more info in it's short time than most give in days of videos. Also, even though you have a nice setup, it is not so overwhelming (big) that I turn it off out of frustration because I only have (most have less) a single garage size area. Most tubers don't realize their pole barn size shop is a turnoff, not a turn on. Thanks for keeping it real and informative and not a "look at what I got" video!.

@nightcarverdesigns 2 года назад

Great breakdown of the different functions and routers. very informative.

@MCsCreations 2 года назад

Fantastic tips, Jonathan! Thanks a LOT! 😃 Stay safe there with your family! 🖖😊

@SpencleyDesignCo 2 года назад

Super fantastic and thorough video, Jonathan! Well done sir!

@dennisbrown2571 2 года назад

That homemade router guide is perfect for a project I am just starting. Thanks!

@daviddejulio863 2 года назад

Thanks man! Especially like the dive into the plunge base.

@67Bahloo 2 года назад

The plunge feature brilliant explanation,very helpful. Thank you.

@user-ki2ej7cx9r 2 месяца назад

Always a great video to watch over and over again and again. I have quite a collection of routers and 1/2” and 1/4” bits. So I enjoy watching to gain more knowledge and techniques to improve my skills.

@maximillianzorn6085 2 года назад

Quite a Bit of great information in this vid. A nice deep plunge into the topic. My head is spinning with all the lessons.

@toddharshbarger8616 2 года назад

Physics aside, that was so well explained! Complete with the memory aides. Very well done! Thank you.

@kaseemali6771 9 месяцев назад

I bought my first circular saw, impact drill and drill driver. Next is my router. I'm a newbie to tools and wood work. This is informative. You've earned my subscription.

@JGV_IX Год назад

I really love my routers and I really thought I knew how they worked - this video has been a game changer for me! Thanks a million!!

@creativemaplewoodworks4640 2 года назад

I love my flush cut bit from Bits and Bits. Bought it two years ago at your recommendation and It’s still going strong.

@krugtbifro6152 2 года назад

A truly excellent video One of the best router videos I've watched 👌 Really informative and I've been a carpenter for nearly 25 years

@KonstantinosStathopoulos 2 года назад

Thank you for sharing your knowledge! Your way of explaining is really helpful.

@boomcity4942 Год назад

Great video! Thank you!

@KohlHosein 2 года назад

Really enjoyed the depth stop explanation 🔥🙏🏻

@jamesrockland9616 Год назад

Haven't watched all your videos (yet) but already I can tell that you are the best teacher for newbies like myself, great tips and amazing explanation skills, overall high quality, friendly, no-nonsense knowledge transfer, as well as top notch video production...THANKS

@Funknwanker Год назад

Paul sellers and Matt Estlea are great as well.

@jxk7712 2 года назад

Jonathan somewhere out there a shop teacher is very proud. God bless

@TheBlakerunner Год назад

Thank you a whole bunch for this fantastic video. You are a first rate teacher!

@tree_carcass_mangler 2 года назад

Great tips, thanks for posting. Thumbs up!

@stevebateman1270 2 месяца назад

Very good tip👍

@JC-zr8zd 2 года назад

This link should be printed on all future router instruction manuals.

@100vla9 Год назад

Fantastic advice ! 👌

@dukeengine1339 2 года назад

Great advices, thanks buddy!

@benjamingerow5650 2 года назад

Newborn DIY'er here. These 101 type vids are priceless, and I'll be seeing what I can get from your links and store to support you (when I know what I actually need).

@lounackman6104 2 года назад

I got that Ultimate trim bit after watching your super slow motion video and it is really an amazing bit.

@allanwilliams679 2 года назад

Another winner Jonathan. 👊🏻 Thank you for some great tips. Allan

@amateurtoaceastro5445 2 года назад

Im new to woodworking and this was such a helpful video! Thanks so much!

@kamalandalsi1660 2 года назад

Thank you for these tips Jonathan

@ronh9384 2 года назад

Good video. Router table = right to left Router= left to right One thing I might add is use dust collection whenever possible. I believe it is Oneida who makes a hood to hook up to a vacuum. It will also help cool the bit. Just make sure you use a very flexible hose and make sure you can control the router safely with the vac hose connected. Ron

@TheRusscarr 2 года назад

Great info video , to the point, no crazy music , your a wood shop teacher . Thanks from Maine

@pgadams1 2 года назад

Excellent tips. Thanks.

@jonefusipuga7290 2 года назад

Excellent hints that could save time and life.

@MegaWeagle 2 года назад

Great video! That simple jig with ca glue will get used tomorrow!

@ArpadBuildsThis 2 года назад

Yes!!! I have been waiting for this video! I can relate to the right hand rule, and sometimes end up doing a climb cut. Routers kinda scare me.

@ironwood1621 2 года назад

A lot of great information, as usual. Thanks.

@vic4602 2 года назад

Thanks for the explanation. Very informative and it make sense. I cant wait to try using my router as a newbie in woodworking.

@keithbrock6410 2 года назад

Nice video as usual man. Appreciate all the great info that you share

@Silent-G 2 года назад

I’ve never used my plunge base. Thanks so much for this!

@tomhostetter8516 2 года назад

Thanks John, great info here...

@landfillbear 2 месяца назад

You explain things very well sir

@kaleidostonecoastal 2 года назад

Such great information! Thank you so much

@svenamundsen4879 2 года назад

Great information!! Thank you!!

@user-wy5ik6zq4r 2 года назад

Great video. Thanks!

@paultodd2087 8 месяцев назад

Such a cool video, thank you for sharing

@ProductsForMen 2 года назад

Thanks so much for this video. I just bought my first router with table. This video gave me so much info. Thanks again!

@thomasjoseph4718 2 года назад

Very informative and very clearly and interestingly put across.

@TJandGrizz 2 года назад

Great tips!

@chrislambert9435 Месяц назад

Thankyou for this presentation . . . Chris . . . Norwich, England

@HowIDoThingsDIY Год назад

I like your "right hand trick". Great tips.

@josephcastro3448 2 года назад

So informative, many thanks!

@markcollins2065 7 месяцев назад

Great information in a very way to understand. Thanks for sharing your expertise.

@jray1429 2 года назад

Excellent video. Very informative. Nicely done and good sense of humor to top it off…Thank you

@5Komma5 2 года назад

very informative. thank you!

@blakedozier1131 Год назад

My first table saw was Craftsman contractor saw. I purchased a cast iron extension wing for it which came with a router plate and fence. I loved it. Much better than the small working surface available on most router tables. Years later I graduated to a cabinet saw with the right wing incorporating a router mount. With my offcut extension table, I have a router table with sixteen square feet of work area. Most, if not all, of the cuts in this video can be done better and more safely using a table, rather than a handheld router. I know, like me at first, a lot of folks have a limited budget but, it is something to keep in mind for the future. I will not have a saw without this provision.

@robgnichols 2 года назад

Brilliant insight !!!

@MrKobyp7 2 года назад

Thank you!!! really helpful.

@bradleytuckwell4854 2 года назад

They were great tips so thank you so much as a beginner I need all the help I can get

@bonganimkhwanazi5097 Год назад

It make a sense I give thanks for sharing you ideas

@jaymomo7462 Год назад

Awesome video.

@1stMrSoundguy 10 месяцев назад

very good explanation easy to follow thx for the lesson

@basilloizou1942 2 года назад

Great helpful information thanks

@LadyBlueRR Год назад

So glad I found this video thanks 💥

@AB-C1 2 года назад

Excellent video!! Thanks from London England 👍😎🏴󠁧󠁢󠁥󠁮󠁧󠁿

@ericsimpson4045 2 года назад

Great content learn a few things that will simplify my router work thanks!

@thomastieffenbacherdocsava1549 Год назад

Nice fixes. Simple and safe. Screwed up my first brass bushing due to not having a centered face plate.

@wayneblythe5713 2 года назад

Nice one Katz 👍🏻👏🏻

@The_Ol_Bizzaroo 2 года назад

Great video as always, and amen on spending more for better bits. I learned my lesson today routing a juice groove. I had been using a cheapo core box bit from an Amazon kit and was getting burning every time that then had to be painstakingly sanded off. On a whim a few days ago, I figured I'd try and buy a Whiteside bit instead. I did a large board today without a single burn mark through maple, walnut, cherry, and mahogany. Cheers!

@alfredomarquez9777 Год назад

Yes, Amazon has probably much more garbage than good items. They are inundated with Chinese junk. That is not saying that they don't have SOME good products, but the majority is just junk! YMMV.