Got my Rovan kill switch installed. I had the same engine kill button as you do so I just desoldered the wires off of the push button switch, cut two of the spade connectors off of the kill switch, shortened the wires a bit and soldered them on. It made the Installation much easier and more tidy. Gave it a test and it works great.
Nice video brother Ben I bought that kill switch from rovan and never used it I got the killa 🐝 bee from killa rc but one question I have a fly wheel spacer from ddm and it says Zenoah spacer on it does it matter what spacer it is when using it for spacing the ignition switch
Thanks brother and thanks for watching!!! To answer your question I’m not familiar with the different kinds of spacers between different brands except for Redcat and Rovan. What I can tell you is you just want something solid to torque down on for a spacer and make sure your coil armatures line up with the magnets on the fly wheel. I have lost spacers before I have also mounted different coils as long as you get the fly wheel gap correct and the coil spacing corresponding with the fly wheel magnets correct you’re going to be good to go. 👊👊👊
Hi mate I have a question I got the same kill switch off eBay $30 I'm Australian pay double for Rovan bits anyway my kill switch is connected in the number 3 on the receiver and it turns off then I do a right hand turn personally I've given up never ending problems. Be safe bro
That’s a weird situation brother it sounds like when you do a right hand turn it delivers power or ground to the Killswitch and kills the engine for some reason. I would think your problem would be in your transmitter and receiver
I got mine off of eBay. I always try to shop around a lot of times you’ll find the same parts at totally different prices. Thanks for watching brother!!!
@@Meyers2strokeRcgarage lesson learned! Thank you for the video and will try my best to follow step by step coz this is my first gas 5B.. I appreciate what you do for us all 👊🏾