Royal Enfield Classic 350 | Arnside to Sandside | Trying Clipchamp Editor | 

Thanks James…….lovely warm tootsies 🤗😂 All the best.

Thanks Neil, we will meet up again this year.

Thanks ice. I record at -12 on the Osmo 3 to eliminate distortion caused by wind noise, then increase the audio in Davinci. Never an issue ! Unfortunately, Clipchamp doesn’t increase the volume enough, so I will have to change the camera volume settings, so hopefully that will sort that out. As for the choppy bit (it did it a couple of times), I did wonder whether it was due to the recording being in 2.7k, and Clipchamp converting to it’s 1080p limit, screwing things up. Clipchamp is the only software I can get to work with my laptop, I think mainly as it is internet based. In Wales, that will throw up a whole other load of issues, as it did last year 🙄. A basic 1080p 30 minute video, will take 5 + hours to render alone (after editing), then another 2/3 hours to upload to RU-vid then some more to process through to HD. I have to time these things to not coincide with our hosts using their computers etc, and bedtime 🥱😂, so I start the process as early as possible. All so I can continue producing content for us all to, hopefully, enjoy 😉 ☺️. The explanation about the jacket is quite feasible, as I know I do sit a bit p***ed up on the bike. Definitely agree with you about self cancelling indicators. All the best to you both, look forward to meeting up again in 2024

Thanks Mel. Unfortunately any vids I do on the laptop, won’t be of my normal high quality resolution, but it is what it is 😢😂 All the best to you too.

Thanks Mick. Thanks for trying to make out I am not a complete numpty, but in this instance, I did forget to press it 🤣 Cheers

Thank you.

Thank you Peter, all the best to you too. I will be as safe as I can, but a bit of trepidation makes for good viewing 😂

Thanks as always Mike. All the best to you and yours in2024.

Thank you Andrew, all the very best to you too. Hopefully Wales will dry out a bit so that Clementine can get out to play 😎

Thanks GBD, all the best to you too.

Thanks Mal. I am usually quite paranoid about the indicators, even to the point, which you can usually see in my vids, that I just tap the off button for no reason. Then I go and do this …………..😅 Best wishes for 2024 😊

Thanks Steven, just need to get a heated Willy warmer for my nose 🤗😂

Thank you. Few and far between at the moment 🙄😂, as I mentioned you, I included a link to your website in description 😉Cheers

Yes Derek, it’s a cracking view, whatever the time of year. All the best to you too, look forward to meeting up again in 2024 🎉

You have to take the chance when you can my friend. All the best.

In our opinion, Arnside Chippy is best we have ever been to. 😎. The bonus being able to take that short drive to a spectacular view. Thanks James.

Good afternoon Roy. Yes, I already have a pin-lock, which keeps the visor clear, but it’s my glasses I have problems with. I do normally use a cloth, which stops them misting, but it turns the mist into droplets, so not ideal. There have been many other suggestions, like smearing washing up liquid over the lenses, but I didn’t find that worked very well either. Sadly, the best way, is to leave the visor open a crack, but that has its downsides too 🙄 Roll on the spring 😂. Thanks for being concerned, much appreciated. All the best to you too. Cheers

Thanks Chris. I don’t get it with me and the indicators. You can often see me just tapping the button, for no apparent reason, then when I need to tap it, I don’t……numpty 😂 The speed limit all along that piece of road is 40mph, clearly just an idiot 🤬. Being away from my trusty computer, is going to involve quite a bit of trial and error. Hopefully I can produce some watchable content 🤞. Cheers

@@ianhughesroyalenfield If it's any consolation, I tap the indicator button, too. 😂

@chrisweeks6973 😂

Thanks Kev, all the best to you too.

Thanks Alex. I have since discovered using the iPad, though unsure how it will perform with long form content creation. I think I will still record in 1080p though, just to give me a chance to get it uploaded in less than a week 😂😂😎 Cheers

@@ianhughesroyalenfield Hopefully the weather will allow you some riding time and good luck with the tech.

@blearyview2254 🤞 Thanks Alex

Hi Martin. I too was a fan of the original windows video editor. When here at home, I use Davinci Resolve 18 on my desktop pc, but this was a trial run to see if the Clipchamp would work when we go to Wales next week. I find Clipchamp to be a bit clumsy on my old and slow laptop. I do have a usb mouse somewhere, which I will try with it. The problem with Clipchamp, is that (I’m pretty sure), it is internet based. So after opening your new project, you upload the footage you have taken off your sd card which is now on your device, to Clipchamp via internet. All would be fine, if both the internet and laptop were high speed. In Wales the internet is adequate at best, and certainly doesn’t like big video files being uploaded. So, everything takes forever unfortunately. As for using clipchamp, the interface is easy enough (especially after Resolve), but the free version is quite limited, and the finished article, like you see on this one, is a bit jerky in places. That might be due to the original footage being recorded in 2.7k. I am hoping that when I record in 1080p things will be a bit quicker, and the final product, smoother. With the free version, you can only render in 1080p, a bit disappointing. Overall, hopefully it will get me by, after all, it’s only for a month, then the normal high quality videos will resume. Hope this helps. That view is rather special, no matter the time of year. My RST Paragon 6 heated gloves, were an eye opener for me last year, and these Keis heated gloves and socks are just amazing. Almost all body warmth 😊All the best.

Hi again. My basic problem is my technophobia to be honest, hence being happy with WVE. My other problem is the basic nature and limitations of both my laptop AND PC. There's a complete app for Clipchamp, but it's over 60gb, which really slows everything down. At least it's getting me used to multi-layer editing (I've never tried anything like resolve). I do everything in 1080 and it seems to suffice.(I've had no complaints to speak of......yet!) A work in progress Ian, regards Martin. 👍

@martintraffordmoorlandbike7121 Davinci Resolve 18, requires some decent hardware to run it. I tried it on my laptop, not a chance. There is an open source editor called “Openshot”, which I was using before Davinci. The only trouble with that, is it sometimes doesn’t want to open, then when it did open, it kept freezing……nightmare ! I bought what is essentially a gaming computer, which cost £750, without it, I would be knackered 😂 A chap used pre-owned cases etc, and installed the gubbins to meet my needs. It’s been a godsend.

Hmmm... I'll carry on with my load/edit/delete method for now then Ian, I've got next year's Spanish/Moroccan trip to save up for! 🥴😅

@martintraffordmoorlandbike7121 can’t have everything Martin 😂 I am actually just looking at other options, with “Shotcut” being one of them. Don’t forget, RU-vid is your friend, there are lots of tutorials on Clipchamp, and the others.

I also considered that too Donna, as the wire does start that side. It’s only a very slight difference, so no worries. Cheers