RTSP for Wyze Cam v3 Download and Install [ Watch Me Doing it... ]

Подписаться 7 тыс.

Просмотров 6 тыс.

50% 1

In this video, I show how to download and install the RTSP for Wyze Camera V3. I also explain how to test the RTSP stream using the VLC software.
Link to download the RTSP firwmare:
download.wyzec...
Please leave your comments to help others with your experience on installing and using the RTSP for the Wyze Cam V3.

Опубликовано:

25 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@LamGorYun 3 месяца назад

can you still use wyze cloud services?

@squidskunk 3 месяца назад

will this work on the roku cameras..?

@IamPoe 8 месяцев назад

Hi was just wondering will this work on the Wyze cam V3 Pro? thx

@chkid 3 месяца назад

I'm using WYZE Cam v1 and what is the delay of the screen in v3 in RTSP? Can you measure the delay? If the delay has improved, I think it will be helpful when I buy it.

@lawdawg1942 10 месяцев назад

Just bought a new wyze cam, updated all the firmware only to realize i can't stream from a computer webpage with out paying. Found the RSTP instructions but when i put the SD card in with the firmware and hold the button down it does not turn purple. Wonder if the newest firmware has changed something.

@SmartDevicesChannel 10 месяцев назад

I had this problem once when trying to install the RTSP firmware, I had to use another SD card with less capacity (storage) for the new firmware. Try that and follow the instructions here step-by-step. I hope this helps.

@lawdawg1942 10 месяцев назад

@@SmartDevicesChannel You are correct. I found a old 2 gig card and it was fine. My 128 didn't work. Probably needs a SD and not a HC or XC card. Thx

@QAnog 7 месяцев назад

Ahh! Maybe this will work for me too. @@SmartDevicesChannel

@dundeepolice991 9 месяцев назад

Question. RSTP is needed to view two wyze cams on two solo monitors....(correct) ?

@QAnog 7 месяцев назад

This is not working for me as of February 2024. Any thoughts? I am using a 128GB SanDisk ImageMate PRO microSDXC UHS-I Card. I have the .bin file by itself on the root of the card. I hold down the setup button, and continue to hold it while I plug in the camera. The light will be red, then it will begin to flash red, and the camera will say "Ready to connect." Sometimes there will be a brief moment where the blue LED flashes one time before the red flashing LED and the "connect" audio plays.

@SmartDevicesChannel 7 месяцев назад

Sometimes it happens, I had this problem before and I used another SD card and it worked. Please try.

@QAnog 7 месяцев назад

@@SmartDevicesChannel Yes the different card worked. It was also 128GB SanDisk, but a different kind. I had to reformat it for each camera I set up with it though. It was like it broke after every use. In the end I got the first four cameras working. Now I will get more for sure.