No video :(

Ruger Precision Rifle: Loading Precision .243 Winchester

Подписаться 356 тыс.

Просмотров 67 тыс.

50% 1

Please consider supporting Ultimate Reloader on Patreon: / ultimatereloader
-------------------------------------------
Important: See disclaimer at end of video description.
-------------------------------------------
Full story: bit.ly/2c37Hog
Time for some .243 Winchester precision loads for the Ruger Precision Rifle! In this video I walk through the end-to-end process of handloading .243 Winchester using the Hornady Lock-N-Load Iron, the L.E. Wilson Bushing-Type full-length sizing die, and with IMR Enduron 4451 powder. Check out the bullet runout results at the end of the video!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving posessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition relaoding data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Ruger
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@TommyboyGTP 8 лет назад

Everyone has been jumping on the 6.5 Creedmoor bandwagon, so i'm glad to see that the .243 Winchester hasn't been completely forgotten about. Thanks for the uploads!

@Ultimatereloader 8 лет назад

Yeah, glad to show some love to the good old .243!

@quiquecruz6203 Год назад

It is a pity that Ruger no longer manufactures its Precision chassis rifle in the caliber 243 wincheste as at the beginning, its barrel had an interesting twist

@homeostasis4me485 2 года назад

Just an observation- that's a good way to double powder if you're not careful. Powder, move over to an empty hole, repeat until finished. Not sure how full your case is after one throw but in general it's a good habit. Thanks for the great video!!!

@TdotOfiddler 7 месяцев назад

Wait, where's the trimming and chamfer and debur??

@vladdracul2379 Год назад

Question: why put the bullet in the case as you raise it up instead of placing one in each case in the container? Wouldn't that be more effective?

@desspamer 7 лет назад

where is the follow up video?

@SampsonAllen 8 лет назад

I'd love to see a video on the funnel you used. I can't seem to find a good one

@davidlovell4390 8 лет назад

Hello from Down Under, Have really enjoyed RPR series so far!!! I have learnt so much. I am just about to put a deposit on a RPR in .308. Shame there is a 3-6 month wait for them here. Keep up the good work. Thank You .

@Ultimatereloader 8 лет назад

Congrats David! Hoping to make it to Australia some day... If it's any consolation, wait times are similar here in the USA.

@buckeye8069 8 лет назад

you can load 243 from 55grain bullet to a 120.haven't seen much on 120 or 115's

@Plainsimple67 4 года назад

TOO FAST OF A TWIST FOR THAT LIGHT BULLET.

@vaughnprecision 8 лет назад

Nice job.! Can't wait to see the results

@koltiska 8 лет назад

Try 105Amax over 48g Retumbo. My RPR loves it!

@Ultimatereloader 8 лет назад

Thanks for the suggestion, always good to get field-proven pet loads!

@zhuli693 6 лет назад

what is the group from this batch of 42.6 gr propellant + 85gr bullets ?

@IAmaLfYTheLlama 8 лет назад

don't even own a gun, but the videos are really entertaining and informative.

@Ultimatereloader 8 лет назад

Thanks!

@jamessteinmetz4201 8 лет назад

Finally! I've been waiting weeks

@lja4429 8 лет назад

From two months ago, I ask.."What was your load with the 105 Hornady and Varget , and also do you have the Length to Land for your 243win?..I have been working with, 105 Hornady Match, 32.2gr of Varget with 2.70" length giving me about a .041" bullet jump to land, for my Ruger precision...I would like you input please.."

@Vader4tw 8 лет назад

Leo, you should measure from the 0give to the base of the case (CBTO)for a more consistent value. You will have to measure your lands yourself, all guns are different. Use the OCW method for your own tune in .3 increments or you may miss a node. I shoot a 6x47 Lapua..running 37.4 grains of 4451 on a 22" barrel with a can. defiance/Kreiger gun.

@lja4429 8 лет назад

Thanks for you help..I'm thinking of ordering a Hornady headspace gauge now for 243 win and later 308 win to in-prove my consistency at reloading and at the range...any input for this before I order...I would like to give you more background on my reloading, but that would take a two page dissertation....thanks

@jeansauve887 2 года назад

please show the results at each step of the reloading process... ty

@elflordyt6830 2 года назад

Ok, i really want .243 in full auto mannnn

@emeryemond7904 8 лет назад

GREAT video, excellent info for shooters new to the hobby. You have more presses and loading equipment than any 10 of us shooters watching - do you buy and own all that stuff or is some of it for testing and reviews ?

@Ultimatereloader 8 лет назад

Both- I have partners I work with, and acquire some of it myself. :)

@mdw159 7 лет назад

question here. is it possible to re-use the case ..? (from old / junk ammunition case)

@amsb4dafunk406 4 года назад

Yes I re-use Till I see damage But I don't go pass 10 times.

@desspamer 7 лет назад

A bit dangerous to use the same case holder that your prepared brass is sitting in to pour powder in as well, separate the prepped brass from the charged brass....I use a green tray for prepped brass and then once I poured powder I move the case over to a red tray one by one,.. much less chance of doing a double load!.....stay safe and happy shooting!

@Ultimatereloader 7 лет назад

You can't do a double load with this cartridge, and I always do a visual over all cases before seating bullets, because the real risk is a squib (no charge) load! But, each one of us has their own process. Whatever it takes to be safe!

@JSomerled 2 года назад

I was hoping to see range results? Are they in a future video?

@hughjair133 5 лет назад

Are you trimming every time with the 243 brass for consistency? I have an rpr in 243, thinking about switching to a different caliber but I really like the 243.

@Plainsimple67 4 года назад

GO WITH A .260 REMINGTON MATCH CHAMBER OR .260 ACKLEY IMPOROVED MATCH CHAMBER.😉👉

@phedhrogorrero 2 года назад

Reloading question. If a load calls for 90 gr. Fmjbt, can i substitute a different type bullet of the same weight? ( ex. A 90 gr. Hollow point flat bottom bullet). Or a same type but different brand, is it safe?

@edwaggonersr.7446 5 лет назад

Like everything about the video except the loud music which adds nothing to the content.

@VitoBb1978 7 лет назад

Gavin great video your load looks very interesting. You didn't say which brand of brass, OAL, or primer you used. What's the barrel length and twist rate of the Ruger Precision ?

@leandrof325 4 года назад

Very good video!

@TimothyGoetz 7 лет назад

great video! ordering a LnL kit now! question, when seating, do you onload the primer dispenser? I see the shuttle going and wonder if it's dangerous while seating. Thanks!

@Ultimatereloader 7 лет назад

Awesome! The primers are loaded 100 at a time into the drop tube behind the press- you refill when they are empty.

@TimothyGoetz 7 лет назад

gavintoobe thanks are there primers loaded while you are seating bullets?

@SnakePliscan 5 лет назад

There's no follow up to this that i could find.........

@Plainsimple67 4 года назад

HE NEVER FINISHED IT, TOO MANY OTHER PROJECTS ON HIS HANDS I BELIEVE.

@brucehartsell4997 7 лет назад

you're lucky you got one of the 243 Ruger's before they decided to stop production.

@Ultimatereloader 7 лет назад

Agreed- it's a great package...

@chevy6299 8 лет назад

Waiting.

@TROJAN4EVR 8 лет назад

Great Video!!! 👍👍👍👍👍

@mackenziejones4890 2 года назад

What is the twist rate on your rifle

@Spidouz 8 лет назад

What cases brand are you using?

@Ultimatereloader 8 лет назад

Hornady for .243 Winchester. Just realized how nice it is to have only one headstamp to deal with!

@Spidouz 8 лет назад

gavintoobe Thank you Gavin! Yeah, I just got to the same conclusion. I think I'm wasting a lot of time by having cases from many different origins, and therefore trying to develop a load with too much variables and inconsistencies already. And then I used some cases from cheap factory ammo, but was not perfectly happy so far. So I think it might be time to invest in a good set of quality cases from the same brand! I guess we cannot be cheap on everything... LOL :)

@Vader4tw 8 лет назад

buy a box of lapua. 1 box will allow you to shoot the barrel out.

@ThePruneemac 4 года назад

How are you deciding on your OAL?

@Anon85858 4 года назад

What press is that?

@Vader4tw 8 лет назад

Your having to hold forward on the case because other wise it will hit the die on the way up. You should go buy a chargemaster, that scale sucks Buy some Mitutoyo calipers they rock. Measure a loaded round, then subtract how much neck tension you want. I find 1-1.5 thou perfect Turning case necks makes better ammo. You should also tell your viewers that IMR 4451 leaves carbon fouling in the barrel which takes a different cleaner, but it does shoot very smooth over H4350.

@buckeye8069 8 лет назад

Matrix bullistics makes them.

@carlosloomis9826 3 года назад

Shouldn’t have to guide the case into the die as you pull down on the handle. This press won’t be in my collection.

@joelperez6181 7 лет назад

Nice video of resizing and seating. Little useful info.

@Ultimatereloader 7 лет назад

Joel- thanks for watching. I would invite you to browse the 200+ videos on this channel where you'll find a ton of information covering most aspects of rifle and pistol reloading!