Rusty and Broken Bench Grinder - Awesome Restoration

Подписаться 2,6 млн

Просмотров 4,8 млн

50% 1

Hy everyone! In this video i restore this beautiful German Bench Grinder.
The model name is Hanning Type 150 E6z2-061
220v 1~50Hz 1,3A max 3000/min
P2 0,15 Kw
P1 0,15Kw
Made in Western Germany
I didn't found the year was made, maybe you can tell me.
I found this Bench grinder at flea market few weeks ago.
It cost me 10 euro.
In this video you will find the restoration process step by step as the following:
Presentation
Disassembly
Clean all parts
Remove old paint
Spray new color
Restore it
Presentation
Testing
If you want to support me : / tysytuberestoration
PayPall www.paypal.me/tysytube
I hope you like my video.
Huge thank to all of my Patreon and PayPal supporters and specially to:
Olivier
Dre Gilley
Jordon Paul
Goose Gosselin
Conor Fowler
Razvan Alexandru Tanase
Keith Moore
Paul Martin
Stuart Burk
Zachary Smithhisler
Yair Even Or
Eran Julian
Evan Mc Garrigle
Tamara Gray
Emmi Doucette
Andrii Kravchenko
Louis Berkman
Amber
Casey Turner
Kemdel
Renee
Veleum
Made by Laurent
Todd Phelps
PunctualRetard
Céline Lecomte
Andy
Christine and Jim
Daniel Burchell
David Pecor
Kenamot
Jakob Mansson
Falcon91
Marshall Levin
Jason
Musa Subasi
Lee Johnston

Хобби

Опубликовано:

28 мар 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,2 тыс.

@TysyTube 4 года назад

Thank You for Watching! Please Subscribe 🥰😘 And Check My New video Here : (The Jar is almost full) 🤩 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--EZBi9O_0rw.html

@collynstv6452 4 года назад

TysyTube Restoration You need to get a sandblaster it will make everything go faster

@FloofyRulezz 4 года назад

You know a sandblaster is really expensive?

@collynstv6452 4 года назад

YoRulezz TV yes I do save up bud

@Ass_Burgers_Syndrome 4 года назад

How long did this take to do in reality? Sorry if it was mentioned somewhere but I may have missed it.

@80RedRock 3 года назад

On it

@derplstiltskinthedank8476 5 лет назад

I like how you fix a bench grinder with another bench grinder

@Lazerturret81875 4 года назад

I was thinking the same thing lol

@lechatvenere 4 года назад

Grinderception :)

@DaleDix 4 года назад

Was it you who said that on the other channel?

@nicktervoort 4 года назад

Lol, inception

@chace1954 4 года назад

I was thinking the same exact thing 😂😂

@vicv9503 5 лет назад

as a rule, you should always replace the old grinding stone with a new one. you'll never know the exact condition inside the disc and it might disintegrate and fly apart once it start spinning. not a criticism, just a safety tip i guess. great work btw.

@GigsVT 5 лет назад

He has been using this grinder a long time. If the stone was cracked it would have probably exploded by now.

@stefanom597 5 лет назад

Very useful suggestion. Some grinding stones also have expiration date.

@fredx6678 5 лет назад

Wheel replacement is absolutely unnecessary. The method to check a grinding wheel is to tap it on the side while static and see if it has a thunk sound. Not a ring like a tight wheel would have. Also, whenever starting up a grinder, stand to the side while it spins up to prevent injury if it does in fact come apart. Again, every time you start a grinder, never stand in front of it.

@tonk8735 5 лет назад

@@fredx6678 smart

@coolmusic1579 4 года назад

Another safety tip I was taught , never leave a grinder running, wait till it stops spinning, than go about your work.

@nater1625 3 года назад

"I used the bench grinder to make the bench grinder"

@MarcAntoineBvl 3 года назад

Bench grinderception

@tetonsauvage5684 3 года назад

thanos take notes pls

@SergioHernandez-le8wp 3 года назад

We bout to pimp yo grinder

@blossommrose4929 3 года назад

😁

@helpme5785 3 года назад

Bench grinders all the way down

@92pkg 3 года назад

Well in a way, this was a simple restoration. Disassemble, clean and and remove paint. Change out worn or damaged parts. Repaint and assemble. Pretty much straight forward, but it was so satisfying to watch and the end result was really good. I like how you stuck to the original paint and so on. My ocd is having a wonderful day. Thank you sir!

@gr1mrea9er82 5 лет назад

This channel is becoming better and better... in editing, restorations and promotion. Magnifique!

@user-pf8zg5qt5v 5 лет назад

This is exactly what I was saying the whole video. This is just perfect before sleeping 😌

@Fuzziefeelings 2 года назад

Who else is watching this before bed time?

@lordzuzu6437 3 года назад

On the beginning I was like "Wait, is that music on your videos? But how am I supposed to watch before sleeping?"

@TheWiseDaws 3 года назад

The capacitor blew that’s why it wouldn’t start on its own.

@TheWiseDaws 3 года назад

@Aaron david yes with a capacitor start motor the capacitor is used to help create a rotating magnetic field, then once the motor reaches a set rpm the capacitor is taken out of the circuit and the motor just runs off the single phase power. That’s one of the reasons why three phase motor are so elegant because with the three phases 120 degrees out of phase with each other already produces a perfect rotating magnetic field.

@phillipwright746 3 года назад

@Aaron david think of a capacitor like a battery. When you flip the switch to turn on the appliance, the capacitor unloads all its stored energy all at once giving the motor a jump start. Once the motor is turning the normal current takes over and the motor runs on its own.

@borysnijinski331 3 года назад

@@phillipwright746 no...not even close.

@austinfrombwa 3 года назад

*WAIT................ WHAT NOW!!!!!!!!!!?????????!!!!!!!!!!*

@firebladex8586 3 года назад

@@borysnijinski331 yes he is correct

@tribblebooth1224 5 лет назад

These restoration projects are addictive, I can't get enough. This is certainly one of the best I've watched. 10 out of 10!

@so2fast4u2 5 лет назад

i was working on something a couple hours ago and stopped for a cig... that was like 3h ago.

@zildog 4 года назад

Dead right. I've been binging for weeks now. Rescue and Restore is better only because he has the sandblaster, lol

@Tinr2d2 4 года назад

Adam Zillin have you seen my mechanics? So much better than everyone else on youtube. High quality videos

@samkurtz7540 4 года назад

I know im late on this one but check out the one this guy did on an old fire extinguisher. Incredible

@naza3251 3 года назад

trololeitor piteitor

@DiesInEveryFilm 5 лет назад

WOW now thats what i call a restoration you made turned that thing from a pile useless junk to looking brand new. Absolutely amazing work.

@chris6969 5 лет назад

👍

@leeverink32 5 лет назад

its soldering or sodering welding is something else

@pianoherzig3232 5 лет назад

Will Survive only the consumables would cost him nearly 40 Dollars. Cable, Capacitor, Primer, different paints. Let alone the 2 days of work he has to invest. Not a very profitable business

@Gazz2424 5 лет назад

@@pianoherzig3232 I think you've forgotten about the RU-vid revenue, it's very profitable

@pianoherzig3232 5 лет назад

Gaz-101 Well, i don‘t think you want to see only bench grinder restorations on this channel. Besides that, the revenue you get from youtube is not high enough to be called very profitable.

@JohnSmith-kp8kv 2 года назад

OH...MY...GOD I DON'T WANT TO KNOW WHAT I WOULD DO WITHOUT WATCHING EVERY SINGLE ONE OF YOUR VIDEOS MAN

@kaliefurr9419 4 года назад

I love watching these videos, they peak my curiosity about how to take things apart and put them back together. I have always had this since I was a little girl.

@seanpeifer1002 5 лет назад

Hey man, love the videos! As a rule of thumb, I wouldn’t hammer those bearings on like that, you could end up messing up the bearing or the shaft. The best way to install bearings and races is to freeze the shaft if possible and heat the bearing to around 150-200 degrees; it’ll just slide right on and cool down tight, no hammering necessary.

@zyxwvutsrqponmlkjihgfedcba0 3 года назад

Call me insane. Some of us just use a press.

@BradyT918 3 года назад

@@zyxwvutsrqponmlkjihgfedcba0 A press is a constant uniform amount of force, not a repeated impact of varying levels of strength that isn't guaranteed to be an even distribution of force on the bearing.

@wileycoyotesr8623 3 года назад

@@zyxwvutsrqponmlkjihgfedcba0 You're insane. (you asked me to say that - ha!) I have always used a press when possible and think it's the best method.

@zyxwvutsrqponmlkjihgfedcba0 3 года назад

@@wileycoyotesr8623 You're not wrong. On multiple levels lol

@GerCrusader 3 года назад

If you hammer, always on the inside ring, which is what he does. So it could be worse!

@pro-impulse2831 5 лет назад

You should really invest in a sandblaster

@Champagne519 5 лет назад

Loool just about to make this comment, and it’s the most liked one here.

@jonasalbrecht5220 5 лет назад

@Sillygammer 1234 if you mean the channel my mechanics, that is not he there.

@ThePetrovNikita 5 лет назад

@@jonasalbrecht5220 are you sure? The hands, the style of video..

@ForDemoPurposesOnly 5 лет назад

I want to say that he is starting to use a sandblaster now, but can’t remember what video I saw him use it. And as for him having another channel, I’d say that others just do like he’s doing - point the camera and shoot. No camera movements, except at the beginning and ending.

@brandonsloan4877 5 лет назад

I was about to make this comment too lol

@Smeltz247 4 года назад

The ending is so emotional. This old bench grinder will know what it's like to be loved again.

@peter-worth 7 месяцев назад

I don't know why, but I love this one the most. Brilliant job!

@josefranciscoreveles6903 5 лет назад

Without music, without speaking, perfect! Excellent channel!

@jamesleary1405 3 года назад

This one and my mechanic are by far the best I've watched out of many. And I've been into restoration since I was around 12yrs old I'm now 39.

@haroulezos 5 лет назад

Glossy finish and it works perfectly! I would love to see those danger and arrow stickers again, but other than that, you did perfect job! Keep on!

@Viper00900 5 лет назад

I agree replacing the safety stickers along with him adding the eye shields would have finished the project perfectly.

@mindwarp12 5 лет назад

Wasn't that a vintage Shazam sticker? lol

@MartinPlanner2 5 лет назад

no stickers allowed! if you don't know how it works, you should not operate it! :D there is no grinder that turns the other way...protection glass is fine-don't really need it when wearing goggles tough-but no stickers necessary!

@jamesfield5346 4 месяца назад

Awe, you painted the polished steel look. I love polished steel look. Your restoration turn out perfect though.😊😊

@user-yi7cy2cc9s 3 года назад

Он новый такой не был! ИЗУМИТЕЛЬНАЯ РАБОТА!!!

@MohamedMimed 5 лет назад

that's what I call a perfect restoration, and a good editing work video.. bravo

@paulwisdom5383 5 лет назад

That big silver capacitor is why it wouldn't start. Same symptoms on tumble dryers! :)

@moxie6389 3 года назад

"Snaps bolt" a thousand memories of working on a 2003 jeep return

@laz2135 3 года назад

Came out better than new. Love your video. When I want just relax. I come to your video. Thank you!!

@heiner71 5 лет назад

The grinder was from before 1990, when East and West Germany were reunited. After that, labels would only say "Made in Germany", not "Made in West Germany"

@tronixfix 5 лет назад

*Western Germany 😉

@Adamz678 5 лет назад

@@tronixfix Wasturn Jirmaney

@FraggleRagaraga 5 лет назад

@@tronixfix i have plates from my grandparents that say "Made in West Germany" that they bought in West Berlin.

@tronixfix 5 лет назад

@@FraggleRagaraga ok, the plate on this grinder still says "Western" so it was made in the western part of Germany.

@FraggleRagaraga 5 лет назад

@@tronixfix ok, I'm pointing out how things are labeled differently.

@user-br5ep4vf3q 5 лет назад

Отдельный респект за сохранение оригинального шильдика! Спасибо, всегда приятно Вас смотреть!

@simpncheeseman7045 4 года назад

Love the work you do. It's so nice to see someone who takes pride in their work and the results speak for themselves, I would purchase anything you renovated because I know it's been done with care.

@writerconsidered 4 года назад

The feel good end of movie type music at the end was hilarious.

@dbrew2u 5 лет назад

Great work . Instead of going to a Landfill or Recycle . It once again is a useful , productive and great looking tool . Excellent Video .

@Night129 5 лет назад

When you restore something, you get all new parts; but you refurbish them and I like you for that. Great restoration.

@SHODGES69 4 года назад

The paint came out really good, that orange pops 👍🏼

@dejavu666wampas9 2 года назад

Outstanding restoration! Beautiful, prettier than when it was new. I know this is an older video, but I’ll agree that ‘Safety First’ would call for replacing the grinding wheels. Awesome video. Thanks.

@lucianosorato6661 5 лет назад

Beleza de restauração, da prazer de ver o trabalho e o antes e o depois. Como sempre melhor que na loja

@sambasamurai6693 5 лет назад

17:02 It isn't welding, it's soldering. There is a big difference between these, because in welding you melt the two metals to each other, but in soldering you only fix them together by melting a metal which is hardening around the soldered pieces of metal. Thanks for this video, it's really great.

@rddav1 5 лет назад

There may be a language barrier of a sort. I think he's french.

@itsonmylist5369 4 года назад

@@rddav1 He is german. All the signs of his products and tools were written in german

@BenjaminLikesCats Год назад

No he lives in France 🇫🇷

@1calvinfunny1 3 года назад

Why the hell do I enjoy watching these restorations?

@sambaggins2798 2 года назад

I always give a thumbs up before I even watch the video. I know it’s going to be good. That being said, I can’t believe how far you took that apart.

@qweasd6260 5 лет назад

Вы не поймёте, что я написал. Но я восхищён. Вы-большой профессионал

@stanleydenning 5 лет назад

You did a very nice job of restoring the grinder. Better than new. The berrings you used were manufactured in Joplin, Missouri, USA. I used to live there. I would be afraid to use it in fear of scratching the nice paint job. LOL

@toddrf 4 года назад

Nice restoration. I watch these vids at 2x speed and lose nothing.

@EdouardBernard24601 4 года назад

Thank you for this. I really learned a lot about how to fix something like this, and not to simply throw it away. And thank you especially for showing that the left wheel is left-hand thread while the right wheel is right-hand thread. Great video.

@BABIPEDROM1 3 года назад

Faltou só os adesivos originais, mas não me canso de ver seus vídeos . Quanto mais antiga a peça mais sensacional é o vídeo e o seu trabalho . Very good...

@pemtax557 4 года назад

Nicely done ... love how well this grinder is built ... I was amazed at how pristine the interior electronics cavity was given the condition of the exterior. It was definitely designed to keep those parts well protected. As always, your work is impeccable, your paint skills are quite refined and the results you get from over the counter spray cans shows just how good you are. A pleasure to watch ... cheers!

@telecasteredtodeath 3 года назад

Beautiful! Glad to see you kept this orange, shes now too pretty to put to use!

@willieckaslike Год назад

Another excellent result. I also applaud your use wherever possible of 'hand tools'! Thank you for sharing.

@TysyTube Год назад

Thank you very much!

@theMoporter 5 лет назад

Not a big fan of the music, but I don't got to say, it's really cool that you experiment with your videos so much!

@lselvester 5 лет назад

yeah I agree on the music. Love the videos just not the 'Its a Wonderful life' tunes ;)

@chuckjames1943 5 лет назад

@@lselvester Turn your volume down. Problem solved.

@MustrumRidcully 5 лет назад

Agreed. I was worried at the beginning thinking it was going to go on the whole video. Fantastic restoration as usual but drop the music, it totally isn't needed.

@lselvester 5 лет назад

@chuck James I like the sound of the work being done though. It's very relaxing.

@kets5535 5 лет назад

Ты молодец, отлично и красиво всё у тебя получается, приятно смотреть!! Желаю процветания каналу!!!

@JoseRodriguez-ey2nk 2 года назад

No es que le hayas devuelto la vida sino que además le diste alegría! Bravo, una vez más te has lucido !!!

@TheFatalHalo 2 года назад

PS: I love that you reused the original sticker. Nice touch!

@GerCrusader 3 года назад

Small security advice: If you attach cables and you're lucky enough they come with ground, always make sure ground is the longest wire. If you trip over the cable and manage to somehow pull out the live wires and they accidentally touch the casing, you do not electrocute yourself. Also your GFCI (if you have one, in german it is FI-Schutzschalter) will pop!

@georgeshelton6281 8 месяцев назад

Did you notice that the men who run the video game companies make the new video games harder than the old ones. The old ones are totally a peanut/they're Peanuts.

@-x-dx7295 5 лет назад

Very good indeed. Stone wheels can be cleaned with a high pressure water device.

@tomcarlisle6936 3 года назад

Gotta say, I've never seen a more subtle and effective way of getting viewers to subscribe! Worked on me! I think what you do is quite amazing. I'm a bit envious of all that great equipment. I'm a luthier and do a bit of restoration of various stringed instruments. Gave me a few ideas! Thanks!

@garyjones7198 4 года назад

TYSY A very nice restoration.. They make a tool for redressing those wheels.. But sometimes we have to make do with what we have.. Again, a very nice job..

@robertmeyer8221 5 лет назад

Very nice job. I would suggest getting a stone dresser. Someone ground non-ferrous metal like aluminum with those wheels. You need to remove it as to avoid an imbalance condition where the wheels explode. Also for practical purposes, I would remove the paint from the tops of the tool rests.

@samuelfellows6923 5 лет назад

Robert Meyer - 😱😉

@scotty2804 5 лет назад

Awesome job on this one bro looks like it just came out of the box excellent paint job to keep it up bro look forward to the next one thank you Brian

@luffyleo2969 4 года назад

Você fez uma restauração perfeita, fica evidente que seu trabalho por tanta qualidade e capricho para atingir o resultado.

@evertonsemroteiro 4 года назад

Nossa sou louco por ferramentas , e essa ficou maravilhosa ! Ainda vou adquirir uma igual a essa , linda !

@2003garyb 5 лет назад

Tysy! Quel grand projet et vidéo! Le moulin à banc s'est avéré magnifiquement. Je pensais que pendant que vous l'assemblez que ce serait bien si vous pouviez mettre votre logo dedans, et alors vous avez fait! Vous devez vous sentir satisfait de la façon dont cela s'est avéré-vraiment beau! Prends soin de toi, mon ami. What a great project and video! The bench grinder turned out beautifully. I was thinking while you were assembling it that it would be nice if you could put your logo on in, and then you did! You have to feel satisfied with how this turned out--really beautiful! Take care, my friend.

@PLDmitri 5 лет назад

There is a special tool for cleaning the grinding wheels. It cuts off some of the material to restore the surface geometry.

@lanefu 5 лет назад

PLDmitri wheel dresser. It looks like a handle with a bunch of spurs

@Renville80 5 лет назад

Lane Jennison even better is a mounted diamond point. Properly set, they can do a better and quicker job than the star wheel dresser.

@user-sx4yu3nw4j 4 года назад

Is that the name of the tool that my mechanics used to clean the grinding wheel that he restored?

@africanelectron751 4 года назад

You can make one by brazing a old carbide insert on a bit of steel...won't last forever tho and it's only good for cheap wheels.

@user-ik7fm5ch6c 4 года назад

you're doing great more of these vidios! 😄👍👍👍 From Russia👋👌

@Edman_79 5 лет назад

My God, you're good! This looks just amazing! And that sticker is just perfect! Love your work!

@emolgatheelectricsquirrel6734 5 лет назад

using a french bench grinder to fix a german bench grinder, great vid

@fabanano6158 3 года назад

@johnconnor555 3 года назад

Cred că nici nou nu arăta așa bine ca acum.Bună treabă,bravo ești nr.1 !!!

@KTPurdy 4 года назад

It's always fun to look at shiny objects

@teefs_ 5 лет назад

please keep the full video when you scrape the paint off of things!! it’s so satisfying!!

@saafaasaaffaa5917 3 года назад

متتاهت٠🙂😎😎😎😎😎😎😎😎😎😎😎😎😋😎😎😎😎😎😎😎

@Aengus42 5 лет назад

Some types of electric motors need a capacitor to start smoothly. As soon as you asked "Why didn't it start?" I thought "Blown capacitor!" Then, when you discovered that huge capacitor in the silver can that "seemed a little swollen" it reinforced my theory. Replace that big, silver cap. The rating is printed on the cap itself & they're pretty cheap. It's a common repair, especially on items like tumble dryers. Costs pence but has amazing results. It's my first go to when an electric motor won't start without a little nudge.

@JayHutchG 4 года назад

Sweet project. Enjoyed watching. The thumbs down stuff is ridiculous

@Kevincheesepizza 4 года назад

I like your spray technique and I really do admire you using the cups to sit the components. This is alot of work, looks really good like new!

@igorvespa7387 4 года назад

Indonesìa 25 november 2019.. Time 19.23 this is my favorite channel .. from this channel I learned a lot. very inspiring and makes me very excited...

@hipusallinen2344 5 лет назад

This soothes my soul. Keep up the good work! BTW loved those orange "flowers" the paint formed after the paint stripper. :)

@brettthornsberry7169 3 года назад

That is absolutely amazing work. The amount of different tools, the time it takes. I wouldn't want to even use it because it is so beautiful!

@thierrybenobiel9799 3 года назад

Impressionnant très beau travail chui épater a chaque fois que je regarde une de vos restauration bravo vous me régalé

@Elzubi 4 года назад

6:38 falling in love with the paint removal 😍

@VideoCyberspace 5 лет назад

Welp, now you have 2 grinders. Great work.

@Wiradjuri217 2 года назад

Im always amazed you can remember where everything goes back on

@MrsMilato 3 года назад

Me, watching you take apart, clean, fix and make new stuff u will never own or use.... this is my happy place

@roshif-tv9xd 5 лет назад

Great work! Honestly, one of your best to date. On top of it I respect taking items others just throw away...and call junk, and restoring to give it a brand new life. Too many times (especially here in America) people are about getting the new, more powerful item, and cast aside things, when with a little work can be used for another lifetime. Great example of how, with a lil love, u can bring something back from the junk pile. Keep up the good work!

@kp3509 5 лет назад

Most immigrants fix and reuse. Americans usually chuck old working things away.

@leonelverdinelli4595 5 лет назад

Translate: I see your videos every week, almost from the beginning of your channel, and I can say that there is constant progress in the restoration and in the way of making the videos. Thank you very much for your work, I'm glad to have found your channel. I would like to see you perform the restoration of some old alarm clock. Original: Veo tus vídeos cada semana, casi desde el comienzo de tu canal, y puedo decir que hay un constante progreso en la restauración y en la forma de hacer los vídeos. Muchas gracias por tu trabajo, me alegra haber encontrado tu canal =D. Me gustaría ver que realices la restauración de algún reloj despertador antiguo ;) Saludos desde Argentina.-

@KeyserSoseRulz 4 года назад

I think the right term is soldering, rather than welding. It looked good to me. In fact, the whole restoration looked great, better than the original.

@matheusmarceneiro7591 4 года назад

Eu comprava esse esmeril!!! Ficou top!!!! Parabéns

@K1TT3NM1TT3N5 4 года назад

Money well spent on that camera, I love how when your disassembling I can see little Poof's of ancient crust dust in the air. I fEeL lIkE iM tHeRE

@colinmartin9797 5 лет назад

DO NOT REUSE THOSE OLD GRINDER WHEELS. THERE IS NO WAY TO TELL IF THEY WILL FLY APART WITHOUT WARNING. THEY ARE MEANT TO BE DISPOSABLE, THROW THEM OUT. Dead capacitor is the issue. Otherwise great work. I would have left the solid aluminum/magnesium base bare. That would have looked really cool. But it was originally painted, so perfectly fine either way, and it looks great. Also, no music is better.

@PapaBear6t8 5 лет назад

Those grind stones seem out of balance too, causing unwanted vibrations that could lead to a premature wear of the bearings...

@david-flint 5 лет назад

It's totally fine to use old wheels as long as you do the ring test to check for integrity. A newly fitted wheel should be dressed to ensure no vibration.

@bandysxxx 5 лет назад

david flint you just said what every mechanic was thinking.

@dhc4ever 5 лет назад

Get new wheels. They are so loaded with aluminium its time for the bin. Why people insist on grinding alloy on wheels after years of warnings not to is beyond me, Darwin award seekers? Now you have 2 grinders set one up with a linisher belt and a wire wheel for alloy grinding and general cleaning and the other with grinding wheels for steel. Put either or both on a moveable pedestal, so you can move them around to suit and if you do a lot of grinding move outside and not fill your workshop with grinding dust. Nice job.

@projectyardinc4256 5 лет назад

Personal opinion mate, but honestly I prefer that he voted to maintain some of the original character. But to each their own

@hishamalqubbanchy5332 Год назад

Germany 🇩🇪 Best quality. Good job man 👍

@willamsbatistadevasconcelo5533 3 года назад

Lindo, uma maravilha, excelente amigo. Não tem outro igual a te. Uau!

@elricdemelnibone5241 5 лет назад

Superbe restauration et ça fait plaisir de voir un français faire ce genre de choses. D'habitude je tombe plutôt sur des américains. J'aurai par contre bien aimé vous voir faire quelque chose avec l'appareil.

@gaborbalazs3346 5 лет назад

8:42 ROZSDAÁTALAKÍTÓ :D Oké, Hungarian product name, now I'm happy :D ;) THX

@Jerepasaurus Год назад

I'm glad you decided to keep its awesome color scheme. ♥

@Raikenight 4 года назад

The fact you did this all without power tools besides the bench grinder..a+

@Ethanolamine 4 года назад

I don't think I've ever got emotional over a restoration video...until now.

@sofiastepanova5755 3 года назад

No way!

@mymechanics 5 лет назад

WOW!! It looks brand new, tysytube bench grinder :-) where can i buy it?

@stblind79 5 лет назад

True !!!

@k00lgai 5 лет назад

Yeah we want answers

@k00lgai 5 лет назад

Yeah

@k00lgai 5 лет назад

Yeah

@GoldbergMarkus 5 лет назад

Answer!!!!!!?

@Abo_Zead 4 года назад

Your new followers ,, you are already a wonderful followers from Saudi Arabia like🇸🇦👍🏻

@user-pi9sb3dy6s 4 года назад

Я под твои видео всегда засыпаю. Расслабляет. И релаксирует. Люблю когда другие работают))

@mpalaskokkalis1476 5 лет назад

Τέλεια η επισκευή του μιχανηματος 1.000 μπράβο φυλε μου πάντως .

@echangwang1821 5 лет назад

You should scan that sticker and make a replica and print it out, that'd be cool.

@pedrohenriqueotaku84 3 года назад

Your restorations is the best restorations !!

@kennethdoucette4954 2 года назад

I Stopped At 5:03 : I've Figured Your Possibly Going To Use ( Common Sense Says To Me ) Your Going To Use Another Grider/WireWheel/Polisher To Clean&Restore This One !!! Great Video, Enjoying So Far !!! Thank You !!! More To Come !!!

@barrycossins9027 5 лет назад

realy love these video but the sticker in my opinion should be places on a part away from visual gaze ....just a thought Keep it up you are a very good restorer