Тёмный

Rusty Coal Iron (1914) Restoration 🛠 

Restoration Restore Channel
Подписаться 4 тыс.
Просмотров 81 тыс.
50% 1

An old rusty coal Iron from 1914 has to be restored.
Removing rust, polishing, sand blasting, woodwork and more.
All this fine handwork you will see in 4k.
If you are interested in restoration videos, handcrafting and woodworking, please subscribe this channel.
So you will never miss a new exciting video.
The puppy in this video is "SAM". 🐶
He is 20 weeks old and is a half-breed of two english and hungarian huntig dogs.
If you want to hug him... I will do for you. Just give a like and I know what to do😃
You will see him in all of my videos.
The seller of the Iron told me it was from 1914.
I don´t know if it is the thruth. I could not check it.
Following you can have a look to the tools and equipment I use:
Amazing Reusable Cable Ties:
In Europe: amzn.to/3VSqjbR
In America: bit.ly/3XVfCHr
Metal Cold Weld Mass :
In Europe: amzn.to/3Sbki9n
Heat Resistant Color Spray:
In Europe: amzn.to/3IAJLWy
Welding Maschine STAHLWERK:
In Europe: amzn.to/3XKDuMi
4K Film Camera I use:
In Europe: amzn.to/3VCGFp8
In America: bit.ly/3h729M4
Light I use:
In Europe: amzn.to/3BBhawL
In America: bit.ly/3XY4Kbz
If you use the link to buy I get a small reward.
The price for you is the same with or without the link.
Thank you so much for your support :)

Развлечения

Опубликовано:

 

18 фев 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 178   
@petermyrice567
@petermyrice567 Год назад
Again, quality craftsmanship . I'm never disappointed in your channel.
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much Peter 😀👍
@henrikgrigor384
@henrikgrigor384 Год назад
Nice job well done. As it was your first welding project I am proud of you. About tips .. when you want to weld cast iron first preheat the work second tip use lower power (I noticed the work was melting) . Good luck 👍👍👍👍
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much my friend! I have to learn a lot of welding. But for the first time it was Ok I think. In the video you can only see the welding that has worked. All failures are not shown 😅 Thank you for watching my videos 😀👍
@jmcalle
@jmcalle Год назад
This is an antique chimney iron from the brand licsa, in the city of Elorrio in Spain. Great Job! I admire your perseverance to achieve a really good result.
@bestrestorechannel
@bestrestorechannel Год назад
Wow! This is great! I did not know. I am glad that you like the vido and write a comment. Thank you so much!😀👍
@samuelkofsky
@samuelkofsky Год назад
You have done a good job and from what I have seen on RU-vid it is good to heat up the iron before you weld it. I am not sure what temperature, but a slight redness in the iron should be good.
@bestrestorechannel
@bestrestorechannel Год назад
Thank you for your comment! Yes I think you are right. I should have heaten the iron before welding. I still learn but this I will do next time. Thank you for watching my videos! 😀👍
@kelsenellenelvianeverdawn1946
Also a tip when cutting (making) threads that will help you a lot. You need oil to keep it from breaking and to cut the threads easier. 3-in-1 oil or actual oil made for using a tap and die.
@bestrestorechannel
@bestrestorechannel Год назад
Sounds good! I will try it next time😀👍
@thisolesignguy2733
@thisolesignguy2733 Год назад
😅first time welding and you pick cast iron and stainless to start with...we all know you set the bar high, but that's just crazy lol. Great job! welding looks easier than it really is and I think you did pretty darn good.
@bestrestorechannel
@bestrestorechannel Год назад
😃 Hi! Thank you so much for your comment👍 Welding was not easy at the first time. But I will practice and hope some day I am not so stupid anymore 😂 Greetings to you from Germany 🖐
@thisolesignguy2733
@thisolesignguy2733 Год назад
@@bestrestorechannel we all start somewhere :) I suggest practicing on rebar. It's cheap and will give you good practice on flat areas, curves, and bumps. That's how I learned, trial & error all the way!
@bestrestorechannel
@bestrestorechannel Год назад
😀👍
@user-rg9ib2ks1t
@user-rg9ib2ks1t 3 месяца назад
A beautiful job well done sir nicely restored it looks awesome 👍👍👍👍💯💯💯
@bestrestorechannel
@bestrestorechannel Месяц назад
Thank you so much for your kind comment 🙂
@Kali_Kali
@Kali_Kali 2 месяца назад
I liked this channel. Cool to restore rusty things. 🙂 It would be a good idea to dim or fade the screen on the movie while welding for the sake of people with epilepsy, I think. 🤔
@bestrestorechannel
@bestrestorechannel Месяц назад
That is true. I will do it in the next Videos 🙂
@emiliosantaellacruz8694
@emiliosantaellacruz8694 8 месяцев назад
Esa gran paciencia y muy buen trabajo, se merece un like.
@bestrestorechannel
@bestrestorechannel 8 месяцев назад
Thank you so much for your comment 😃
@bestrestorechannel
@bestrestorechannel 8 месяцев назад
And for the LIKE 👍
@bgdavenport
@bgdavenport Год назад
Preheat the cast iron to around 600 degrees F. I prefer nickel welding rods, but stainless steel is fine, too.
@bestrestorechannel
@bestrestorechannel Год назад
Thank you! I learned to preheat the cast iron. Next time welding will be better i promise. I am happy that you Watch my Videos! Greatings from Germany 😀👍
@19555sandra
@19555sandra Год назад
Esta restauración es bellísima, esta plancha es sin igual. La plancha de mi abuela era más sencilla pero igual se utilizaba el carbón.
@bestrestorechannel
@bestrestorechannel Год назад
¡Hola! Me alegra que te guste el hierro. 😀 Si en algún momento nos quedamos sin electricidad, todos volveremos a planchar con carbón. 😅 Te mando saludos desde Alemania!😉
@tailsdblack463
@tailsdblack463 Год назад
9:53 talk about a sad iron yes, jeez, also as a tip preheat cast iron before welding to avoid cracks later on, as for pin hole cracks like that one on the chimney spout thing you want it down quite low voltage so it does not burn through, there is plenty of videos about the basics of welding. Im no welder but once i do i should be able to pick it up quickly, me preferably i like plasma welding or brazing, less violent.
@bestrestorechannel
@bestrestorechannel Год назад
Thanks for the tip. I'll take that into account next time! 👍😃
@do-re-me-fa3258
@do-re-me-fa3258 Год назад
Wow, compared to some other guys that I’ve watched, you seem to know a bit more of what you’re doing. You even have a heck of a lot more tools I must subscribe thumbs up to you have a very nice evening.🙋🏼‍♀️🇨🇦🍀🍀🍀🍀
@bestrestorechannel
@bestrestorechannel Год назад
😀👍
@do-re-me-fa3258
@do-re-me-fa3258 Год назад
Wow, I do believe that Everyone is impressed. That is beautiful. Quite an awesome job you did their! Thank you so much for sharing.🎉😊👍🏼💐🙋🏼‍♀️🇨🇦
@bestrestorechannel
@bestrestorechannel Год назад
I thank you so much for your comment! I am glad that you like the video 😀👍 It is a difficult time now for my channel. Because i have so Less time to make videos. I hope and I promise to do more Videos in the next weeks. Thank you for subscribing 😀 Best greatings from Germany!
@dannyhenson3141
@dannyhenson3141 11 месяцев назад
I seen you had troubles in some areas especially the welding. But over all you did a good restoration job. Keep up the good work and learn from your mistakes then you will get much better.
@bestrestorechannel
@bestrestorechannel 11 месяцев назад
Thank you so much my friend! I am happy that you enjoy the video 🙂 Greetings from Germany to however you are 😀👍
@javiermoreno4681
@javiermoreno4681 9 месяцев назад
Is a little hot , put down the adjustments, preheat the material and use the rod welding for cast iron .
@bestrestorechannel
@bestrestorechannel 9 месяцев назад
Thank you for your comment and Tips 😉👍
@jsnmarch
@jsnmarch Год назад
I just saw a restored VW Bus driving through the local grocery chain parking lot today. It was in a type of green. Very cool.
@bestrestorechannel
@bestrestorechannel Год назад
VW Bus is an legend 😀👍
@carlmcgee1623
@carlmcgee1623 Год назад
Obviously better than brand bloody new. Great job !
@bestrestorechannel
@bestrestorechannel Год назад
Thank you for this kind comment 😀👍
@samuelfellows6923
@samuelfellows6923 Год назад
Please put a welding tint filter on the camera lens - 😣, the footage gets washed-out by the arc = we are blinded by it and the camera’s sensor will be slowly damaged,
@bestrestorechannel
@bestrestorechannel Год назад
Thank you for this tip. I did not know that it can damage the camera. I will get a Filter for the camera. 🙂 Thank you for watching my Videos 😀👍
@charlesroman9163
@charlesroman9163 11 месяцев назад
Trying welding for the first time "on the air" is a brave step. Let's hope you keep doing it and get to be great. Fun video.
@bestrestorechannel
@bestrestorechannel 11 месяцев назад
Thank you for your comment 😀 Sometimes you have to switch of the brain and hope you do not ruin everything. Welding is not my favorit. But i am willing to learn 😉 Thank you for watching my video 😀👍
@carrestore
@carrestore Год назад
NICE JOB
@bestrestorechannel
@bestrestorechannel Год назад
Thank you! I am happy that you like my Video 😀👍
@cecilgore495
@cecilgore495 Год назад
Buddy having never welded before you did a good job, the thing is you were willing to try. We learn from experience and I am sure as time goes on you will become more efficient at it. Over all I think you did an outstanding job on restoration of this old iron.
@bestrestorechannel
@bestrestorechannel Год назад
Hello! Thank you so much for your comment and your kind words 😀 I am happy about this. Every day i learn and next time welding will be better i promise. 👍 I send you greatings from Germany 🙂🤝
@tjkoker
@tjkoker Год назад
Two keys to filling a hole, especially with cast iron. Get amperage just above non-binding point. Too high and you make the hole larger as seen in video. Second start from the perimeter of the hole and work towards the center. If you start in the middle, again, you'll make the hole bigger. Also, have you considered electrolysis or at the very least a liquid rust remover before sandblasting? Overall, nice job. Cheers!
@bestrestorechannel
@bestrestorechannel Год назад
Hi! Thank you for your tips for welding. It was my first time welding... Please excuse🫣 I will learn and some day i will be a pro. I hope 😀
@do-re-me-fa3258
@do-re-me-fa3258 Год назад
When is pretty tough like that to get off.. have you ever thought about spraying some oil on it to loosen it? I’m just offering you a suggestion that’s all it’s my first time here. I find it pretty interesting watching you restore whatever that item is.. Good luck. Have a nice day.
@bestrestorechannel
@bestrestorechannel Год назад
Oh yes, I did it several times with oil to loosen it. Sometimes it works, sometimes it does not work. But it is always worth a try. Thank you for your advice 👍🙂
@MASI_forging
@MASI_forging Год назад
Beautiful job as always.
@bestrestorechannel
@bestrestorechannel Год назад
Thank you 😀😀
@jamesfield5346
@jamesfield5346 Год назад
Your rust dust comment... I love the a Mell of napalm in the morning...
@bestrestorechannel
@bestrestorechannel Год назад
Yes, that is right too 😀👍 But 1 movies is missing. Tip: It has to do with a knife 😉
@AyazRestoration
@AyazRestoration Год назад
Aweasome Work! Well done❤😊
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much! 😀
@RestorationAustralia
@RestorationAustralia Год назад
Looks cool.👍
@bestrestorechannel
@bestrestorechannel Год назад
Thank you Bro! 👍😀
@l.l.2252
@l.l.2252 Год назад
cool das dass sogar am ende funktioniert 👍
@bestrestorechannel
@bestrestorechannel Год назад
Danke mein Freund! Ja, das Bügeleisen wird jetzt jeden Tag benutzt 😉👍
@Enginesetc
@Enginesetc Год назад
Good attempt but man, that welding :'( you need to get a mig welded for thin stuff and practice! Keep up the effort though 👍🏻
@bestrestorechannel
@bestrestorechannel Год назад
Thank you for your tip. I am an absolute beginner in welding. But i will practice 😉 Hope my skills will grow 😀👍 Did you guess the 3 movies?
@Enginesetc
@Enginesetc Год назад
@@bestrestorechannel No problem, gotta practice :) I did not :(
@bestrestorechannel
@bestrestorechannel Год назад
"I like the smell of rust (napalm) in the morning" - Apocalypse Now + "This is not a knife - THIS is a knife" Crocodile Dundee + "I am your father" - Star wars V But dont tell the others...they should find out by themself 😀😋
@tolyn8060
@tolyn8060 Год назад
Лайк поставлю за терпеливый труд.Но хочу заметить,сварочный аппарат не верно указывает ампераж.Второй момент,изделие(утюг)литое,железо слабо углеродистое,потому хрупкое.Соответственно диаметр электродов нужен меньше,чай не рельсы варишь))).
@bestrestorechannel
@bestrestorechannel Год назад
Спасибо за совет! Я все еще учусь. Я первый раз сварил. Надеюсь, мне скоро станет лучше. Большой привет! 🙂👍
@draganmeister8770
@draganmeister8770 Год назад
Schweißen ist üben üben üben und nochmal üben. Wenn Du Dir nicht sicher bist ob die Stromstärke passt nimm erst ein Probestück wo Du es testest. Manchmal sind zuviele Unterlegscheiben zuviele Unterlegscheiben 🙂. Kürz doch einfach die Schraube . Aber ein tolles Ergebniss . sieht echt super aus. .
@bestrestorechannel
@bestrestorechannel Год назад
😀 Danke, ich werde mich ran halten was das schweißen betrifft. Es war ja auch eher Löcher stopfen als richtig schweißen. Ich werde weiter üben 👍Bei den Unterlegscheiben gebe ich dir recht. Ich habe überlegt die Schraube zu kürzen. War aber die einzige die ich in der Größe hatte und ich hatte muffen daß sie zu kurz wird. Und dann das Projekt noch länger dauert nur wegen der Schraube. Das Projekt hat 4 Wochen und ca. 70 Arbeitsstunden plus 20 Stunden Schneiden gebraucht. Ich hatte 900 GB Filmmaterial 🫣 Aber du hast recht... Sieht nicht gut aus mit den ganzen Unterlegscheiben. Aber funktioniert und ist auf der Innenseite.. Von daher. Toll daß du meine Videos schaust und auch was schreibst 😀👍
@draganmeister8770
@draganmeister8770 Год назад
@@bestrestorechannel danke für deine Antwort. Und nebenbei, es gibt für jedes Material die passende Elektrode. Wow, das ist echt heftig viel arbeit gewesen. Wie gesagt , das Ergebniss kann sich sehen lassen. Mit einem Meßschieber kannst Du die Tiefe messen. Dann passt auch die Schraube und im Zweifel gild, lieber zweimal schneiden als einmal zu kurz.War auch nur als Tip gemeint nicht als Kritik. :-) LG
@ivancordial2082
@ivancordial2082 Год назад
Ich habe gerade mit dem Arzt
@bestrestorechannel
@bestrestorechannel Год назад
Man kann nicht vorsichtig genug sein 😅👍
@larrymiglore7508
@larrymiglore7508 Год назад
And you say you never welded before ... I dn't believe it!
@bestrestorechannel
@bestrestorechannel Год назад
Hello my friend. 😀 Thanks for your comment. It's true. I've never welded before. In the video you only see the scenes that worked reasonably well. There's at least 30 minutes of welding left, which isn't shown in the video. Quite a lot went wrong there. 😏 Most of the time it just didn't weld even though the contact was there. But whatever. The main thing is that you liked the video. Best regards from Germany 🙂
@larrymiglore7508
@larrymiglore7508 Год назад
Think of it as just a long rehearsal. @@bestrestorechannel
@npfrestoration
@npfrestoration Год назад
Great job. I restored a similar iron, even did ironing
@bestrestorechannel
@bestrestorechannel Год назад
Thank you! I am happy that you like my videos 😀👍
@jeffreybrayer3231
@jeffreybrayer3231 Год назад
#3-Crocidile Dundee #2-Star Wars: Return of the Jedi #1-Stripes???
@bestrestorechannel
@bestrestorechannel Год назад
Hi my friend! Good observed. Star Wars and Crocodile Dundee are right. But Stripes is wrong. Sorry. Do you want to try another suggestion? Or should I tell you the 3. movie? I am happy that you like my video 😀
@pierrebeneby4120
@pierrebeneby4120 Год назад
I actually love reading manuals. I brought a drone recently and I read the manual about twice now. When things are engineered to very high tolerances, I find it interesting to read about them. Because I'm a nerd. 🤓
@bestrestorechannel
@bestrestorechannel Год назад
😅 Thank you for your interesting comment 👍 I am always impatient and want to start immediately. Reading the manual ist better I know. But it takes time...😃 In the end I sometimes regret not to have read the manual 😅 I am happy that you like my video! All the best for you and greatings from Germany 🇩🇪
@pierrebeneby4120
@pierrebeneby4120 Год назад
Thanks. Much love and greetings from the USA 🇺🇸. God Bless and sorry about your pipeline. Lol 😅
@berksevgi3543
@berksevgi3543 Год назад
You did it well I think, keep it up 🤘🏻
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much 😀👍
@PZLRESTORATION
@PZLRESTORATION Год назад
Best work. Parabéns 👏👏
@bestrestorechannel
@bestrestorechannel Год назад
Muito obrigado! 😀 Fico feliz que você goste do vídeo. Envio-lhe saudações da Alemanha! 😀🤝
@taniaatademos4776
@taniaatademos4776 Год назад
Perfeito 👌 lindo demais 👏👏👏👏👏👏👏
@bestrestorechannel
@bestrestorechannel Год назад
Obrigado pelo seu comentário! Fico feliz que você goste do vídeo. Mando saudações a Portugal 😀👍
@kelsenellenelvianeverdawn1946
You need a piece of copper being the hole when filling it. The copper won't weld to the piece and it will let you fill the hole better.
@bestrestorechannel
@bestrestorechannel Год назад
Hi, thank you for your tips! I will consider it next time. It will held me improve my skills! 😀👍
@SNRestoration
@SNRestoration Год назад
very nicely 👍
@bestrestorechannel
@bestrestorechannel Год назад
Thank you 😀👍
@eruaconceicao3576
@eruaconceicao3576 Год назад
Você trabalha bem um belo trabalho. 👏👏👏
@bestrestorechannel
@bestrestorechannel Год назад
Muito obrigado! Fico feliz que goste dos meus vídeos. Envio-lhe saudações da Alemanha. 😀
@eruaconceicao3576
@eruaconceicao3576 Год назад
@@bestrestorechannel obrigado a você amigo
@franciscopasianoperezgonza84
@franciscopasianoperezgonza84 8 месяцев назад
Great job and incredible at the same time. I would like to know: What do you do with the metal scraps or dust you colected in the cristal jar. Thank you so much!
@bestrestorechannel
@bestrestorechannel 7 месяцев назад
Hi my friend! Thank you so much for honoring my video 😃 I collect the rust and other things because i think maybe some day I can use it. But until now I have no idea for what I will use it. But I guarantee: When it will be done, you will see it in a video 👍 Best regards from Germany 😃👍
@falkovanalstversicherbarve3208
👍Schöne Idee, zum Schluss das Logo-T-shirt zu bügeln und zum subscriben hinzuweisen! Grüße in die Werkstatt!!
@bestrestorechannel
@bestrestorechannel Год назад
😀 Ja man tut was man kann ! 😋👍
@zsara9748
@zsara9748 Год назад
good job, subscribed
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much! I am proud that you like my videos 😀👍
@leoniecummin1572
@leoniecummin1572 Год назад
What an awesome restoration. You are a true master craftsman! Who is not afraid of trying new techniques in front of your audience.
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much for your kind words 😀👍 I am happy that you like the restoration. I send you greatings from Germany 😀
@captkleppto
@captkleppto Год назад
From what I have seen, most cast iron has been braised and not welded. The cast iron is to soft and blows out with the amps needed to weld.
@bestrestorechannel
@bestrestorechannel Год назад
Hi my friend 😃 Yes I think you are right. Welding cast iron was not the best idea. But sometimes you have to try to learn for the next time 😉 I am happy that you watch my video. Thank you! I wish you all the best and send you greatings from Germany 😃👍
@andrzejporeda7281
@andrzejporeda7281 Год назад
Przepiękne jest to stare żelasko odrestałrowane z 1789 roku produkcji pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍👍
@bestrestorechannel
@bestrestorechannel Год назад
Przesyłam pozdrowienia dla Polski
@valdemargomes5100
@valdemargomes5100 Год назад
FICOU CHIK NOTA 1000
@bestrestorechannel
@bestrestorechannel Год назад
😀
@DrMrSmooth
@DrMrSmooth Год назад
Amazing work brooo ! Keep going ! You have subscribe and like
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much for your comment! I will Check you channel too 👍😀
@restorerestoration4705
@restorerestoration4705 Год назад
💫💫
@rosellabill
@rosellabill Год назад
If you were to use a tank of water that you put the item in @ the beginning with salt. Pit a wire to help the electricity along to the iron and then an iron rod across the top to hook the wires to. You would have gotten rid of most of the rust from the start. But nice job
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much for your comment 🙂 I've seen your suggestion in other videos. I think I'll try it on one of the next projects. I still need to get some information about it. Thank you my friend and greetings from Germany. 😀
@divinginst2359
@divinginst2359 Год назад
Creative and beatiful in the vedio,the movement of the car.greetings
@bestrestorechannel
@bestrestorechannel Год назад
Greetings to you my friend 😀
@javierperezgonzalez8903
@javierperezgonzalez8903 Год назад
QUE BUEN VIDEO Y QUE BUENO USTED
@bestrestorechannel
@bestrestorechannel Год назад
¡Muchas gracias! Me alegra que te gusten los videos. Espero que disfrutes los próximos videos. Saludos de mi parte para ti! 😃👍
@ganikudul674
@ganikudul674 Год назад
God job bos fom indonesia😁👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🇲🇨
@bestrestorechannel
@bestrestorechannel Год назад
Thank you so much bro! 😃👍
@niltonyamada1588
@niltonyamada1588 Год назад
👍👍👍
@bestrestorechannel
@bestrestorechannel Год назад
Thank you😀👍
@babusalim6019
@babusalim6019 Год назад
💗😜😀😃💗
@bestrestorechannel
@bestrestorechannel Год назад
😅👍
@bfg1637
@bfg1637 Год назад
That's not for cloths silly. It's a camping grilled cheese press 😊
@bestrestorechannel
@bestrestorechannel Год назад
Let's try... 😄👍
@robertbunch7421
@robertbunch7421 5 месяцев назад
Why did the rust magically dissapear when the oil went on it.
@bestrestorechannel
@bestrestorechannel 4 месяца назад
There is silver stuff in the oil so it looks silver after using the oil.
@user-mb3xf9qd4f
@user-mb3xf9qd4f Год назад
👍🏻👍🏻👍🏻
@bestrestorechannel
@bestrestorechannel Год назад
Большое спасибо! Thank you!
@-cw4eo4wp5g
@-cw4eo4wp5g Год назад
...обломаную лерку в детали просто молотком выбил, но со сваркой поработать надо!👆😖😉👍👍👍💥
@bestrestorechannel
@bestrestorechannel Год назад
мы работаем над этим😀👍
@PaulJohansson-hf8bo
@PaulJohansson-hf8bo Год назад
they are called geese not gooses
@bestrestorechannel
@bestrestorechannel Год назад
If you belive it or not. I saw it on Google Translater. But that sounds so wrong and crazy to me that I used "gooses". That sounds much better to me stupid german. 5 years school english and always bad school grade 😅 Please excuse me for that 🫣 Thank you for watching my videos and writing a comment 😀👍
@jamesfield5346
@jamesfield5346 Год назад
Couldn't you've used j.b. weld or something?
@bestrestorechannel
@bestrestorechannel Год назад
I am no pro in welding. It was my first time. Hope i will get some more skills soon. Thank you for watching my Videos 😀👍
@kwneuer1396
@kwneuer1396 Год назад
Hmm..christmas vacation...star wars...crocodile dundee
@bestrestorechannel
@bestrestorechannel Год назад
😃 Thank you for your comment my friend! Star Wars and Crocodile Dundee is right 👍 Christmas vacation is wrong. Sorry. Do you want to try another suggestion? Or should I tell you the 3. movie? I am happy that you like my video 😀
@christelmuller9198
@christelmuller9198 Год назад
Es waren keine Gänse , Kraniche , man hört es am Ruf . Eine Kreutzschlitzschraube und eine Schraube mit Innensechskant sind fehl am Platz , Restauration heißt im Original erhalten. Ich wünsche dir weiterhin viel Glück. Gruß aus Magdeburg
@bestrestorechannel
@bestrestorechannel Год назад
Vielen Dank! Grüße zurück nach Magdeburg 😀👍
@Maxx27099
@Maxx27099 Год назад
Learned how not to do so many things. Thanks!
@bestrestorechannel
@bestrestorechannel Год назад
It's a pleasure! I am glad that you like my videos! 😃👍
@jeanpeeters5450
@jeanpeeters5450 Год назад
never heard of cutting oil, if you use it your tap won't break as quickly or not, and the voltage plus amperage setting of your welding machine is way too high
@bestrestorechannel
@bestrestorechannel Год назад
Thank you for your comment 😀👍
@kazimierzburzynski2538
@kazimierzburzynski2538 Год назад
Ładnie wykonana renowacja. Tylko jedna uwaga nie można tu stosować śrub gwiazdkowych ani krzyżakowych bo to dyskwalifikuje całą robotę.
@bestrestorechannel
@bestrestorechannel Год назад
Myślę, że masz rację. Śruby nie pasują do żelazka, które ma więcej niż 100 lat. Niestety dla mnie to była jedyna opcja. Mam nadzieję, że efekt nadal był zadowalający. Pozdrowienia dla Polski! 🙂👍
@kazimierzburzynski2538
@kazimierzburzynski2538 Год назад
@@bestrestorechannel Dzięki i pozdrawiam.
@autoteck4211
@autoteck4211 Год назад
Pre hear rhe cast you are welding
@bestrestorechannel
@bestrestorechannel Год назад
Thanks for the tip. I'll take that into account next time! 👍😃
@LBPO
@LBPO Год назад
Those are Sandhill Cranes not Geese. But never the less that’s very cool.
@bestrestorechannel
@bestrestorechannel Год назад
I'm not that good at biology. I thought it was geese. Thank you for pointing this out and for watching my videos.😀👍
@ajithfernando1702
@ajithfernando1702 10 месяцев назад
Apocalypse Now The Empire Strikes Back Crocodile Dundee
@bestrestorechannel
@bestrestorechannel 10 месяцев назад
Ja! That's right! First time someone found All 3 movies 😀👍Thank you for watching my Videos!
@SaulAlonsoVazquezCortezky3yo
@SaulAlonsoVazquezCortezky3yo 8 месяцев назад
😂 quiero que hagas un trompo de fierro
@bestrestorechannel
@bestrestorechannel 8 месяцев назад
Maybe next time 😉👍
@aspiringteenchefscooking2001
National Lampoons European Vacation, Star Wars, Crocodile Dundee
@bestrestorechannel
@bestrestorechannel Год назад
Close 😉... Crocodile Dundee... Star Wars... Apokalypse Now ("I love the smell of Napalm in the morning!") - Thanks für watching my Videos 😀👍
@imjosephvasta
@imjosephvasta Год назад
The next time you want to put finish on a wood piece. Keep it on the machine.
@bestrestorechannel
@bestrestorechannel Год назад
hmmm... ok👍
@user-wj5by9mr6i
@user-wj5by9mr6i Год назад
А зсередини в димарі гвинт, який обварювали, так і залишився стирчати?
@bestrestorechannel
@bestrestorechannel Год назад
Так. іншого шляху не було.😀
@jamesfield5346
@jamesfield5346 Год назад
Darth Vader star wars
@bestrestorechannel
@bestrestorechannel Год назад
Right 😀👍
@MargoCapron
@MargoCapron Год назад
How much one of these cause I have one I want to sell am from the Bahamas
@bestrestorechannel
@bestrestorechannel Год назад
Sorry, I dont know that.
@ajithfernando1702
@ajithfernando1702 10 месяцев назад
Acco
@bestrestorechannel
@bestrestorechannel 8 месяцев назад
Absolut 😉
@josegaona-oh9xy
@josegaona-oh9xy 8 месяцев назад
Así de oxidada es mi vida sin balor será que Jehová así quiso que viviera de mantenido eso creo
@bestrestorechannel
@bestrestorechannel 8 месяцев назад
I wish you all the best!
@Cyberix75
@Cyberix75 Год назад
one hour is a really "too much long" video... content is good, but seeing EVERYTHING of EVERYTHING is not..
@bestrestorechannel
@bestrestorechannel Год назад
Hi! Yes you are right! It is too long. I want to manage my videos around 20 - 30 Minutes. But it is not easy. For this video I had 900 GB of film material. Round about 20 hours. But I will shorten the next videos, i promise 😀👍
@Cyberix75
@Cyberix75 Год назад
@@bestrestorechannel if u make a simple video for 20/30 mins is very good, because if it is too long, u can loose watchers
@diyresttube
@diyresttube Год назад
I agree with that.
@restorerestoration4705
@restorerestoration4705 Год назад
very nicely 👍
@bestrestorechannel
@bestrestorechannel Год назад
Thank you Bro! 👍🙂
@restorerestoration4705
@restorerestoration4705 Год назад
@@bestrestorechannel 💫💫💫
@andrzejporeda7281
@andrzejporeda7281 Год назад
Przepiękne jest to stare żelasko odrestałrowane z 1789 roku produkcji pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍👍
@bestrestorechannel
@bestrestorechannel Год назад
Przesyłam pozdrowienia dla Polski😀
Далее
Rusty WW2 Car Jack Restoration 🛠
35:55
Просмотров 193 тыс.
Broken Hand Drill Press Restoration
28:13
Просмотров 62 тыс.
1950s Hand Strength Trainer "Vipody" - Restoration
20:43
100 Years Underground! Rusty COAL Iron Restoration
23:31
Antique 1880s Clockwork coffee roaster restoration
35:47
Rusty Hand Drill Restoration 🛠
26:04
Просмотров 128 тыс.
Giant Butter Churn Restoration
20:58
Просмотров 3,6 млн
Что произошло в ресторане!
0:16
ИНТЕРЕСНАЯ ПРИКОРМКА
0:19
Просмотров 13 млн