Ryzen 9 7950x ITX Build Ft. NR200P & RTX 3090

Подписаться 1,4 тыс.

Просмотров 52 тыс.

50% 1

It's time to answer the question I had the moment I saw the 7950x. How is it in an ITX build? Find out in this 2 part mini series. This is part 1. Part 2 coming very soon!
ASUS X670E-I Overview: • An Engineering Work of...
LINKS:
This is normally where I'd affiliate link you to the featured product, however Amazon recently decided I wasn't good enough for the affiliate program lol.
Submit any PC related design suggestions OR
Submit future video ideas?!
Design.ultraprecision@gmail.com
Link to my store! We are always working towards designing and adding new things!
www.etsy.com/ca/shop/Ultrapre...
Check us out on Instagram to see what we're working on!
/ ultraprecision_technol...
Follow us on Facebook!
/ ultraprecisiontechnolo...
Chapters:
0:00 Introduction
1:08 Coolermaster NR200P
2:03 ASUS X670E-I Motherboard
2:43 AMD Ryzen 9 7950x Cpu
3:12 Corsair SP600 PRO 2TB M.2
6:21 Corsair Vengeance RGB DDR5 5200 MT/s 32GB
7:32 Corsair SP750 Platinum SFX PSU
8:21 Cable management
9:51 Noctua NH-C14S Cpu cooler
11:21 Top panel and fans
12:31 RTX 3090
13:55 Finished build shots
14:24 Noisy Chipset fan on the X670E-I
16:14 Conclusion, subscribe for pt.2 !

Наука

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@MrDiontejackson Год назад

I really liked how you cable managed everything, very clean interior.

@che-weihsieh975 Год назад

One pretty good fan option with the C14S is to use a 120mm fan, maybe the NF-A12X25, on the closer side to the CPU. Then you can probably fit a 120mm fan up top, also, the side panels could now accept two 120 or 140mm fans, in this case I might go with the Phanteks T30 fans, the left one blows directly at the C14S and the right one can exhaust or intake to see whether you prefer GPU thermals or less dust inside your case. This used to be the case with many NR200 builds, but I am not sure if the top left fan could still fit with this motherboard. My B550I Pro AX from Gigabyte has the problem with a slightly higher CPU socket and prevented many tower heatsinks from clearing the top fan, which is why I went with an AIO.

@FredrikLiljeblad Год назад

Thanks for the video :)

@TheHottabych23 Год назад

I built a PC in this case, I love it, I've used Arctic liquid freezer ii 280, it barely fits, it was necessary to remove one edge to fit radiator inside. And also I used 2 noctua A12-25 fans at the top, 2 arctic P12 at the bottom. The build works almost silent. Motherboard ASRock x570, CPU Ryzen 9 5950x, GPU Radeon RX 6600. And I overclocked the CPU btw, via pbo 2. Cinebench r23 scores around 30000 points. Single thread 1650 or so.

@EthanLeitch 8 месяцев назад

Really grey video! I'm running the same exact case with an i7-7700K and Z170 board. Just ordered myself an Asus X670E-I and 7800X3D and can't wait

@alpakajon6740 Год назад

Nice build bud, I also like cramming big components into small cases, my system is also inside nr200p with ATX PSU using an adapter, ryzen 5600x with a cooler master 120mm aio, and my gpu is Sapphire Nitro+ RX 5700xt, it’s a tight fit but all crammed good, with ok airflow, 4x 120mm fans 2 at the top and 2 at the bottom, the aio pulling air in from the back. 😊

@jhellier Год назад

Keen to see the second part of this video :)

Ryzen 9 7950x ITX Build Ft. NR200P & RTX 3090

Опубликовано:

Поделиться:

Ссылка:

Скачать:

Добавить в: