S Gauge and O Gauge Mega Haul - Vintage Locomotives 🚂⛽️

Подписаться 629

50% 1

S Gauge and O Gauge Mega Haul
All of the items I got from a relative of mine. Including S Gauge and O Gauge pieces.
Feel free to comment about your favorite locomotive or piece of rolling stock that I gained.
Thoughts and Ideas are Appreciated
Music Composed and Recorded by Thelefevrefever Production Studios

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@isaacs9583 3 месяца назад

W vid

@trr94001 3 месяца назад

Based on the couplers the Lionel stuff is very late pre-war, say 1938-41. The couplers could be un-coupled remotely using a piece of push button accessory track. When production resumed in 1946 they'd switched to a knuckle coupler.

@Thelefevrefever 3 месяца назад

Good to know. Thanks for Watching! 🚂🧰

@user-uk8jr6zc9l 3 месяца назад

Looks like you have a large project on your hands so have fun. Jersey Bill

@Thelefevrefever 3 месяца назад

Thanks for Watching!

@lukesvintagetrains5495 3 месяца назад

You can run the o gauge loco on dc, it will just run a little bit hotter. And the s guage loco is also ac powered and will do the same on dc power. Although that Bachmann transformer will probably not be enough power to run them, try using a higher voltage transformer to power them. Good luck!

@Thelefevrefever 3 месяца назад

This weekend I bought an American Flyer 75 watt AC transformer for the locomotives. The O gauge locomotive is missing its electric pick up shoes. I’ll probably post a video of my findings in 2 weeks. Thanks for Watching!!

@lukesvintagetrains5495 3 месяца назад

@@Thelefevrefever I’m exited to see it!

@Thelefevrefever 3 месяца назад

@@lukesvintagetrains5495 I did hook up two Bachmann controllers to the S gauge locomotive and at full power all I got was a hum and a little bit of jittering, but no real movement. I am away from my set up currently so that is the most testing I could’ve done.

@lukesvintagetrains5495 3 месяца назад

@@Thelefevrefever oh ok! Well at least you have the controller now!

@vuurvrproductions4656 3 месяца назад

Nice video man but i need help with my athearn bluebox SP45, the couplers on it suck and i dont know how to open the coupler box thing like theres no screw on it or anything, do you know how to open it?

@Thelefevrefever 3 месяца назад

Awesome question. On my Athearn SD45 locomotive, the couplers are clipped on with small plastic black clips that wrap around the diecast chassis. You can either use a screwdriver or your fingernails to clip off the plastic clips. After that the coupler should fall out and you should be able to replace it. That is, if we both have the same generation of Athearn blue box locomotives I do not know how they varied in couplers over the years. Thanks for Watching!! 🚂

@vuurvrproductions4656 3 месяца назад

@@Thelefevrefever check my community post i put a picture of the couplers.