S1 EP17 | WOODWORK | TIMBER FRAME BASICS | DAY TWO BUILDING THE CABIN

Подписаться 53 тыс.

Просмотров 1,3 млн

50% 1

#traditionaltimberframing #woodworking #timberframingbasics
In this diy timber framing video, we continue to construct the cabin in the woods using both modern and traditional hand tools. The mortise and tenon are basic frame work on the 7 x 7 post and beam along with the 7 x 10 beams that will support the floor joist. It is coming along and the modified extension on the tractor is the key. Follow us through three more videos to the final stage of the cabins basic frame work.
We greatly appreciate your time and interest. Please help support the channel by subscribing and sharing content that appeals to you and commenting on the videos. We use the material to improve and bring you better viewing enjoyment.
Instagram: / smokymountainoutpost
Facebook: / smokymountainoutpost
Website: www.Smokymountainoutpost.com
Email: Smokymountainoutpost@gmail.com
Main Camera: amzn.to/2WvDOm9
Main Lens: amzn.to/2wsTJar
Microphone: amzn.to/2QxGZ9g
Second Camera: amzn.to/2IZxUSy
Drone: amzn.to/398oWNt
Canon Creator Kit: amzn.to/33ybIs4
20" Axe: amzn.to/2xaRXe0
13" Hatchet: amzn.to/2U7hYDX
KIT PAGES:
Camera Gear: kit.co/smokymountainoutpost/c...
Tools: kit.co/smokymountainoutpost/o...

Кино

Опубликовано:

26 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 259

@jessekingdom1310 11 месяцев назад

We love it going back and finding all the old ones doing a great job hope one day I’ll get down there and meet you and the kids my wife is in a chair now she fell and can’t walk now So keep going be safe

@SmokyMountainOutpost 11 месяцев назад

Yeah I think we’ve come along way since then. Glad you’re going back and watching the old ones as I do from time to time. Hope you have a great week ahead

@jessekingdom1310 11 месяцев назад

@@SmokyMountainOutpost 💝

@happyhippie1957 4 года назад

I love working with the old tools in the old way. That being said, I appreciate your use of ratchet straps and cutting your mortices with a router, etc. Our ancestors were just men trying to get work done, and they used tools and architecture that was state of the art at the time. They would have cut their mortises with a router too if they had one available. Thanks for the video.

@SmokyMountainOutpost 4 года назад

Your welcome and welcome to the channel

@jrocks1971 3 года назад

Agreed! Hand tools are cool and all, but like that's a BIG job anyway. I guarantee you old Jedediah Springfield would've killed for power tools -- lol ;-)

@olddawgdreaming5715 4 года назад

You have things going your way. Great to see father and son working well together and doing great things. Thanks for sharing with us

@SmokyMountainOutpost 4 года назад

YOUR WELCOME SIR. WE HOPE YOU ENJOY OUR CHANNEL. DON'T FORGET TO ENTER OUR MONTHLY GIVEAWAYS. FIND THE VIDEO AROUND THE FIRST OF THE MONTH, SUBSCRIBE, AND YOUR ENTERED BY TELLING US A VIDEO YOU WOULD LIKE TO SEE MADE. BEST OF LUCK TO YOU...

@julienelson3499 8 месяцев назад

It is nice to see a father and son working together. That is rare these day's.

@julienelson3499 8 месяцев назад

Hello! Do y'all still have the monthly giveaway's?

@user-rr9gh5ko1c 4 года назад

Gentlemean! Thank you very much for sharing your time and craftsmanship with us! Thank you.

@SmokyMountainOutpost 4 года назад

YOUR VERY WELCOME

@markwashburn2418 Год назад

I just found your channel and have been watching on my computer. I bought a saw mill that should be ready for pickup in February. I am going to try some timber frame construction using wood from my property as well. I have an orange Kubota mx5100 and love it. Your hacks for that are something I'm going to do. Especially to the box blade. Thanks for all your time and dedication to this.

@SmokyMountainOutpost Год назад

Welcome aboard! Thanks for joining! Let us know how your project goes or if you have any questions

@davidrickards 4 года назад

Beautiful work for just two men. I love the traditional joinery with the tenons and wood pegs. I would love to have a home built with timbers.I look forward to seeing your progress!

@SmokyMountainOutpost 4 года назад

Thank you. Welcome. Stay tuned for much more...

@Engel-re4bp 3 года назад

Thank you, teacher, for laying out the technique of assembling the quadrants and leveling them to the floor. I would like to see you master as I stand the pillars on the concrete. very kind to enzeñar., from Chile🇨🇱 a big hug.

@SmokyMountainOutpost 3 года назад

Lol, welcome

@revandyrock 4 года назад

thanks guys for the great video and for sharing your beautiful project. I love it that a father and son are working together on something like this. Hopefully my 12 year old and I build something as beautiful one day. Blessings on you guys

@SmokyMountainOutpost 4 года назад

Thank you, and the same to you as well.

@luisarashirovideo Год назад

I'm starting to learn. I have experience in carpentry but I just now entered to the timber world, seems to me that once you master the joints, it's pretty fast paced, once you have the jigs that is what I'm missing, for my router. The chisels I already have them good, I've been sharpening them and Japanese knives with whetstones for a decade. Thanks for sharing this video

@SmokyMountainOutpost Год назад

You’re more than welcome Luis. We are currently building a timber frame workshop behind the sawmill that you may be interested in as well

@rayextrum8648 3 года назад

Happy Sunday looks great keep it up from the North Woods of Wisconsin

@cjwashington3468 4 года назад

I like your work of building a cabin

@Yakuzachris10 5 месяцев назад

That old man strength aint nothing to mess with. Moving those posts all day ain't easy.

@SmokyMountainOutpost 5 месяцев назад

lol, you got that right… moving posts constantly. But the “old man strength” I don’t feel 😂 ha ha ha

@julienelson3499 8 месяцев назад

I L❤VE your building's! I have been looking at them for a year now. I hope and pray to be able to have one someday!! It's a dream right now and I want to make it a goal somehow. Y'all are hard worker's and your building's show that. Thank you!! Julie from Missouri. (Midwest MO.)😊

@SmokyMountainOutpost 8 месяцев назад

Well, thank you so much for such a nice compliment. I don’t work hard I just do a little bit every day and sooner or later it gets done. We’re glad to have you on board with us and hope that you enjoy the content. We always look forward to the comments And wish you a great weekend

@craigbennett47 4 года назад

I like your modified extension on the tractor..

@SmokyMountainOutpost 4 года назад

Thanks. It sure came in handy and we couldn’t have built the cabin frame without it.

@alextopor4038 4 года назад

Great job, well done, lads. Just enjoyed looking after processing. Greeting from Belarus and UK

@SmokyMountainOutpost 4 года назад

Thank you

@james_robnett 4 года назад

Nice video, nice work. I'm about to start in on a porch that consists of 8x8 x 10' posts and 3 20+ foot 8x8 beams with pegged scarf joints to make a continuous beam. I have to rig a block and tackle lift up with a simple gantry tied to the posts so I can lift the beams by myself. When I saw your gantry on the Kubota bucket my first thought was 'Hey, that's cheating'. Nice system, sure makes life simpler. 30 years ago I showed up at a roofing job with a japanese saw, the main contractor laughed at it till I showed him what it could do flush cutting a 2x4. Cool to see it used here. Tough to beat the right tool for the right job.

@SmokyMountainOutpost 4 года назад

They do a great job

@Edgardocelectric007 4 года назад

Really like the fact that using jigs and router to speed up the process

@lyndior8963 3 года назад

Love timber frame. Even tho there's power tools and hardware, it's awesome. Subscribed.

@lesliewatts2878 4 года назад

A-1 guys. Never seen this done before. Very interesting. Thanks. Look forward to your next video.

@kraigboe1991 4 года назад

Looks grand good job

@22highlander 4 года назад

truely an art of carpentry at its best..... Thanks for sharing.

@SmokyMountainOutpost 4 года назад

Thank you for the nice compliment

@robviolin1 4 года назад

Great job 👍

@mule666 3 года назад

Amazing you can drill that straight freehand

@burtlade1705 4 года назад

Looks pretty good!

@user-lz7pr8ny8q 4 года назад

хорошая работа !!!

@jmuse2k 3 года назад

I have learned a lot. Thanks

@susieevans7064 2 года назад

Nice work!

@derrickjones01 4 года назад

Nice Work! Starting to really take shape now.

@SmokyMountainOutpost 4 года назад

Well, we are pleased you like the videos and it is beginning to look like a building. Stay tuned for the rest of the build.

@afsharisohrab 4 года назад

Hi,! Every your movement shows your are very proffetional.

@jamesharless5357 4 года назад

Looking good, great job guy’s!

@SmokyMountainOutpost 4 года назад

Glad you like it. Stay tuned for the rest of the build.

@smoochmcguire5291 3 года назад

Great video thanks

@muhammedfazlic1097 4 года назад

Svaka čast

@GermanShepherdRanch 4 года назад

Great progress. I like the extension you made for your bucket.

@SmokyMountainOutpost 4 года назад

It is cool, eh?

@SmokyMountainOutpost 4 года назад

Thanks

@Djaleleddine 4 года назад

I love this work 👍❤👍

@SmokyMountainOutpost 4 года назад

Thank you

@randysilvers3738 4 года назад

I am a new subscriber. Interesting build. Looking forward to seeing your progress. Thanks for sharing your journey.

@greatkingkay7954 3 года назад

This is bad ass. House fabricated like a furniture.

@SmokyMountainOutpost 3 года назад

Thank you!

@leventebiro1362 4 года назад

Greetings from Hungary! Fantastic job! Thanks for sharing! Learn a lot. Hope I'll use it soon :-)

@SmokyMountainOutpost 4 года назад

Hello Levente, My best friend here is from Hungary. He is a fireman, and I trained him to be a paramedic. Glad you like the channel. Have a great week...

@HandymanLife Год назад

I’m curious as to why you only use one tie down bracket at the base of each post? You could easily add a second one on the opposite side using the same horizontal threaded rod as guide for placing it and then use the same threaded rod to fasten both tie downs

@SmokyMountainOutpost Год назад

No reason really. Good idea but here it wouldn’t be needed. If we were in the plains area, probably would have.

@lionellewis1044 3 года назад

I would like to know how you designed the lift on the loader and bucket

@donaldshields2483 2 года назад

Another good job you and your son did a very good job and I guess I made a mistake I don’t think she’s your daughter she must be hurt your sons lady God bless

@wendypack3652j 4 года назад

Looking great!

@robertthompson6068 4 года назад

Just found you. Awesome project. Something like what I plan to do. Super awesome trick with the router!

@SmokyMountainOutpost 4 года назад

Thank you. Stay tuned for much more.

@kenhomeier8629 3 года назад

Nice video.

@thesheff79 Год назад

Nice work, I'm planning a cabin build soon.

@roninestate1268 2 года назад

Спасибо из России!

@edkhoshaba170 3 года назад

Good job

@njr7044 4 года назад

Just found your site. Looks like you are building with poplar logs correct? Would like to come back to N.C. at the old family place and build this type of cabin. Looking good.

@SmokyMountainOutpost 4 года назад

Welcome, Yes they are poplar. I have an abundance of them, and they work up fairly easy. Hope you enjoy the channel.

@surti72 4 года назад

Good work I have ever seen this before thank you so much for making this video good luck with best regards God bless you and your family Ameen

@surti72 4 года назад

Thank you so much for your reply

@tombryan720 3 года назад

Great video, Glad i found the channel

@SmokyMountainOutpost 3 года назад

Thanks!

@muhammadwaleedashfaq6752 3 года назад

YOU ARE DOING GREAT JOB, I'M ARCHITECTURE STUDENT ITS VERY HELPFUL FOR ME

@SmokyMountainOutpost 3 года назад

I am glad! Thank you.

@elisemotoraventuras8935 3 года назад

saludos desde el salvador greeting from el salvador I 've recently done a cabin in front on my house with metal but any way I 've got many ideas from your good job

@greatsheltercn1113 3 года назад

great job

@SmokyMountainOutpost 3 года назад

Thank you

@house-bank 4 года назад

좋네요...good !

@SmokyMountainOutpost 4 года назад

Thank you

@michellafleur5655 4 года назад

Hello, new fan of yours. I love timber framing. I think it's majestic and beautiful. Will follow you from now on.

@SmokyMountainOutpost 4 года назад

Welcome

@KrisHarbour 4 года назад

You really should be draw pegging as there really isnt any force pulling the shoulder of the tenons tight.I can see the structure moving as you are hitting the pegs in. it really should not be moving like it is in some parts of the video. The posts should have slate under them so the moister does not wick up and the anchors should go at least twice as far up the post. the post bottom will rot out and that bolt wont do anything. These are small things but all really important. But the biggest issue is the lack of draw pegging and using tiny dowel instead of big tapered split oak pegs to draw the joints tight. This method is used so that in the future if the building moves at all you can just tighten it back up with a few taps on the pegs as they are tapered.

@SmokyMountainOutpost 4 года назад

Hey, Thanks for your comment. I have already ordered aluminum plates to go under the post. They were treated but I have wondered. Going to jack it up a little and will take care of that. I have watched numerous videos on your channel and have loved them all. Thanks for sharing your life and your thoughts.

@KrisHarbour 4 года назад

@@SmokyMountainOutpost Great, that will make those post last much longer as wood hates to sit on concrete even durable wood. I always put wood on none wicking stones or slate. Glad you enjoy the videos :) look in to draw pegging as it would make the structure 10x stronger and when all the wood dries and moves you have the ability to tighten it back up.

@maureenpardy3972 4 года назад

Smoky Mountain Outpost p

@jrocks1971 3 года назад

@@KrisHarbour -- The tapered 'draw pegging' sounds KEY. Is that why some post and beamers leave the pegs protruding out of the beam an inch or so 'proud' instead of cutting them off flush -- so they can pound them in more when things get loose in the future to tighten it all up? Also -- does the peg oak matter (white oak, red oak -- I guess whatever oak you have?) Other hardwoods okay for the pegs too...? I'm going to build one of these buildings eventually -- looking for every tip I can get. Love it!

@KrisHarbour 3 года назад

Johnny Rockets yep, that’s it. Leave them long and tapered so later on if anything moves you can tighten it back up again. It’s green timber so it will move a lot so it’s quite a key design feature.

@rahnlawson9463 3 года назад

Your extension device on the front end is really great. You should patent it.

@abdkaiali4228 3 года назад

It's really beautiful and very nice jop

@SmokyMountainOutpost 3 года назад

Thank you

@spcoastie 4 года назад

Looking good! Curious as to why no barrier (metal) underneath the posts? Moisture from concrete is going to take affect posts unless that wood is rot resistant species.

@SmokyMountainOutpost 4 года назад

I plan on a tar coating on post, bracket and around the bottom of the footer. The outside also will have a rock wall from footer to floor level.

@bruceparks3124 4 года назад

Us old timey carpenters would just put part of an asphalt shingle under any post coming into contact with concrete. They're cheap, last forever, and won't rust away like metal.

@ldlink3935 4 года назад

@@bruceparks3124 Thanks for the tip! I'm going to try that!

@greatkingkay7954 3 года назад

There is a chemical wood Preservative that is bottle type 1inch in diameter used in electricity pylons. Just drill a hole , insert it, and then put the wood plug that will break it.

@mydigitallife8311 3 года назад

are u guys burning the lumber with torch?

@robertcapaldo50 4 года назад

Watching from Long Island. Very nice !!

@SmokyMountainOutpost 4 года назад

Welcome. Hope you enjoy the content. Be sure to sign up for the monthly giveaways. Best of luck...

@robertcapaldo50 4 года назад

@@SmokyMountainOutpost how do I do that??

@Banjo-lm2wl 4 года назад

Nice work watching from Australia ❤️❤️❤️

@SmokyMountainOutpost 4 года назад

Welcome. Glad to have you with us. We have a lot of things planned this year. Stay tuned for much more. Don’t forget to participate in our giveaways.

@randomstuffaustralia4074 4 года назад

Amazing

@SmokyMountainOutpost 4 года назад

Thank you

@bevelliott6189 2 года назад

Enjoy watching!

@SmokyMountainOutpost 2 года назад

Thanks Bev

@tangotango168 3 года назад

great

@salvadorbriones3206 4 года назад

nice job , pal.

@SmokyMountainOutpost 4 года назад

Thank you

@komilovbotir3432 3 года назад

ажойиб иш

@charlesdefrancisco5056 3 года назад

I must admit how much I admire your skills..and the process is somewhat romantic I guess in wood folklore..but with the amount of time and labor I just wonder why?

@SmokyMountainOutpost 3 года назад

Because it’s fun and unusual. Labor not an issue. Hard work is good for the soul.

@markb1487 4 года назад

Just found your channel,,, like it,, 👌👌👌

@SmokyMountainOutpost 4 года назад

Welcome. We are glad you enjoy it. Be sure to find our monthly giveaway video at the first of each month and get entered. Wish you the best of luck!!

@annettemillette4091 4 года назад

little by little you will get there

@falconiraq6560 4 года назад

so nice me from iraq

@karenwornum6275 3 года назад

Hi from Western Australia, I am a new subscriber and have just found your channel, very informative and enjoyable

@SmokyMountainOutpost 3 года назад

Hey, Karen! Welcome! We are so glad that you found our channel and subscribed. We hope you enjoy the day to day life of my Dad building his cabin and just enjoying life as he recently retired. We have another channel, Outpost Review, that just started a week ago. It is more talking and reviews on different things we use. We hope you will check it out. Take care and be blessed! -Jennifer Also, we go live about once a month. It gives us time to interact with subscribers and for you all to ask questions. Our next live will be this Saturday at 7pm ET. We hope you join us!

@johnnymason4363 3 года назад

I would like a set of plans on ur jig for the router set up please

@georgewhitehouse8630 Месяц назад

❤after you drill and cut off, you will drive your pegs with extra shine on the last few strikes

@tube-mi2ux 3 года назад

Vare good S.

@SmokyMountainOutpost 3 года назад

Thank you

@meandnature6452 4 года назад

Nice work guys

@onedeadchicken2489 4 года назад

I was looking into learning how to frame properly, I'm hoping to be able to build my own house. I've recently discovered this method of framing and it seems to be the most solid way of doing things. Comparatively, would you say that fewer pieces of lumber are used overall?

@SmokyMountainOutpost 4 года назад

Welcome. Well, it depends on how you build it. I plan on building 2x4 walls (standard) between the posts you see in the video. Since the post are 7x7 you will be able to still see the frame. This is akin to German style architecture (exposed beam). If you use horizontal framing to place say, board and Baton siding (barn style), then yes. Some have used 2in styrofoam panels and placed sheet rock over that. There is a lot less “stick framing involved there. Also, the average double headers over doors and such are eliminated with the beam structure. You can google comparisons on timber and stick framing to see all the pros vs and con that may exist. I will tell you it takes longer, but is “bullet proof”, lol.

@onedeadchicken2489 4 года назад

@@SmokyMountainOutpost I'll take the time, the results will be worth the attention. Stick framing just doesn't have this kind of stability. I'm looking to build in Oklahoma, so tornadoes can always be a possibility. I'm really enjoying your channel, I'm paying attention to everything. Y'all take care and stay safe out there

@SmokyMountainOutpost 4 года назад

I lived in West Texas for ten years and know what you mean. I think you would have fun building it, have a larger skill set when finished and have a much better home structure wise.

@onedeadchicken2489 4 года назад

@@SmokyMountainOutpost I lived in Midland for a time, wind advisories were definitely common. The more I learn on this, the more I want to do with it. Thanks for the encouragement!

@HandymanLife Год назад

I’m building 2x4 partitions between posts as well to use for interior room layout and for exterior window and door supporting much more used to stick framing so it’s also an easy way I already know how to run utilities through the walls and just drywall over it. But the posts will still be exposed inside to retain the rustic and wholesome look.

@terrancemiller8350 2 года назад

Question; I know that burning will preserve the wood when going in earth, just wondering why the char on the upper parts, is there a secret I should know about?

@SmokyMountainOutpost 2 года назад

It just helps to preserve the wood longer in general. -Jennifer

@joegarage6132 4 года назад

Can u tell me how you attached the metal lift on the front of your tractor bucket. It looks pretty sturdy. I made one with a flat blank from Titan using with single pole. I am planning to use it to lift some trusses in about a month, the the double looks better. I can make anything out of metal and have my own Norwood sawmill. Thanks

@SmokyMountainOutpost 4 года назад

I did a video on that particular thing. Check it out and let me know if you have any questions.

@joegarage6132 4 года назад

@@SmokyMountainOutpost I looked for it and found it. Thanks. I plan to do a smaller timber frame when I get some time, I milled some of the timber already. Just saw your videos, great stuff, I bought a Norwood 3 years ago. Hd 36 its great and does a very good job, I made wheels and the levelers to get it off the ground. I used the mill for my ship lap and flooring inside. I live near you and I could not use the wood for structure since it was not stamped, but using it for the rustic look. Thanks again.

@SmokyMountainOutpost 4 года назад

@@joegarage6132 YOU COULD USE IT I THINK, BUT THEY WOULD NEVER ALLOW YOU TO HOOK UP TO PUBLIC UTILITIES. THATS WHY I LIKE UNORGANIZED TOWNSHIPS. IF THEY DON'T HELP PAY MORTGAGE AND HELP BUILD IT, I FIGURE THEY DON'T HAVE ANY SAY SO. I BUILD ANOTHER, CONVENTIONAL STYLE OUT OF MILLED LUMBER AND IT SOLD FOR 225,000 AND WAS INSPECTED WITHOUT FLAW. THEY JUST WANT A CUT SOMEWHERE AND STAMPED FOR RESALE PURPOSE. BUT THIS ONE ISN'T BEING SOLD, LOL.

@danielbianchi2246 3 года назад

@rodolfogonzalez8001 4 года назад

Can you show or tell how you cut those large square mortises? Did you use a chisel to square them as with shallower mortises?

@SmokyMountainOutpost 4 года назад

I HAVE EXPLAINED IN PREVIOUS VIDEOS THE PROCESS OF CUTTING, MILLING AND PREPARING THE TIMBERS TO BE USED. CHECK OUT SOME OF THOSE AND LET ME KNOW IF THEY ANSWER ALL YOUR QUESTIONS. WELCOME TO THE CHANNEL AND DON'T FORGET TO ENTER THE GIVEAWAYS EACH MONTH.

@joederochemont6219 4 года назад

This looks so fun. Thank you very much for filming your hard work. Are those pins/dowels hardwood?

@SmokyMountainOutpost 4 года назад

Yes

@gary24752 4 года назад

Did you get those post anchors designed by an engineer because they look inadequate for any wind and uplift loads on the structure? What about knee bracing?

@manusmcmanus9330 4 года назад

"Look inadequate"?

@gary24752 Год назад

@@manusmcmanus9330 Know structure much?

@Iknowvfx 4 года назад

cool channel. just found it.

@SmokyMountainOutpost 4 года назад

Stay tuned for much more...

@kennethkustren9381 4 года назад

DIY SODIUM SILICATE. FIREPROOFER. CONCRETE WATERPROOFER. GLUE FOR PAPER PRODUCTS. EGG PRESERVER. METAL CASTING MOLDS AND CORES. 1001+ MORE USES. Silica Gel Crystals (AKA Kitty Litter) DRAIN-O CRYSTALS A pot of WATER, on a fire... boiling...

@SmokyMountainOutpost 4 года назад

Are speaking of wood preservative?

@junchen6516 4 года назад

It a make work project year down the road so u got something to do lol

@biglemon6351 4 года назад

Is that creosote you're using on the timbers for ground contact?

@SmokyMountainOutpost 4 года назад

I burned them

@franzjimenez1 4 года назад

Hi, this is Franz. Did I see that on the last bottom beam the bark was still on.?

@SmokyMountainOutpost 4 года назад

It’s all off by now. Put it up on a hurry.

@Justcaa7686 4 года назад

Im from indonesia 🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩

@joydavis4087 4 года назад

May I ask, what kind of metal those L Brackets are made out of, that you’re using for the uprights? And your opinion on recycling metal from old bed frames. I understand old bed frames are a hard tempered metal. Is it workable? Can it be cut and/or drilled? Your input is greatly appreciated.

@SmokyMountainOutpost 4 года назад

I’m sure it could. A nice hardened and sharp drill bit should do the job. Another way would be to drill the concrete and post and put a piece of rebar in the center. That may be cheaper.

@SmokyMountainOutpost 4 года назад

Kind of like mortise and tenon. I have seen that done also.

@joydavis4087 4 года назад

Thank you. That helps.

@SmokyMountainOutpost 4 года назад

lol, I forgot to tell you that the brackets are made of 1/4 in angle iron. I purchased a piece long enough to cut 12 pieces from.

@joydavis4087 4 года назад

Oh, thank you for that. I think, if I’m not mistaken, that and old bed frame would be very near the same strength and consistency. I am told that old bed frames are made from disused railroad tracks, high in carbon and manganese, so tough to weld. All the best.

@lovenotes8706 4 года назад

Is timber framing more expensive to get done than stick frame?

@SmokyMountainOutpost 4 года назад

Hi Danielle, Yes timber framing will cost more due to the material and skill to put it together. If it was precut, you could do it yourself if you had the means to move the material like we have done and save a lot of expense.

@nosaltiesandrooshere7488 4 года назад

👍

@user-tl6fd9pi9r 4 года назад

Please, tell me why don't you use the waterproofing course under the timber column?

@SmokyMountainOutpost 4 года назад

I’ve ordered aluminum plating for them. I will jack them up a little and slide underneath.

@user-tl6fd9pi9r 4 года назад

It will be interesting to see!

@47karon 2 года назад

Love to be able to create my on home in the mountains but no family t o help.i wood coop with someone if they're all alone and we was close neighbors any taker are you guys in Tennessee

@risingministries 4 месяца назад

Great work and thanks for sharing. I can’t tell but are those timbers 6x6 or 8x8?

@SmokyMountainOutpost 4 месяца назад

Hey there, it’s actually 7x7’s and 7x10’s that we used. The 7x10’s were used around the bottom, everything else was 7x7.

@pete8299 8 месяцев назад

Great video!! what are you using attached to the tractor bucket? did you make that yourselves? If so id like to see it close up and see what you did! im planning on using a tractor to raise one myself.

@SmokyMountainOutpost 8 месяцев назад

S1 EP15 should tell you what you want to know

@pete8299 8 месяцев назад

@@SmokyMountainOutpost awesome thanks for the reply!

@benreber2277 3 года назад

Does the top of the lumber being black mean it’s treated or is that fireproofing or something?

@SmokyMountainOutpost 3 года назад

I burned it to waterproof it and helps with bugs

@kestans 9 месяцев назад

I watched video. But for pins to be tight you would not put tenon inside the mortise, first drill a hole on side of mortise, then insert tenon, then make a pin that slides in hole easily, then cut head of the nail and hammer that few millimeter off center of the pin. Then insert the tenon and put the pin with the nail and hammer to make a mark in tenon. remove tenon and drill the hole. When you put tenon inside take new pin and sharpen it a bit so it could pass the off-center hole in tenon - when you hammer it pin will pull the tenon into mortise tight.

@SmokyMountainOutpost 9 месяцев назад

Understood. I am familiar with offsetting the holes 1/16 in. To draw the tenon. However the wood I used was green and my thoughts were that the word will shrink around the pins that I bought from the hardware which are dried and will tighten up on the pin anyway keeping it in place And saving me a whole lot of extra work. I also used timber screws for added strength and peace of mind

@rodziewiczleszek 4 года назад

Never hammer a round stud. Always a square. If the hole is 20 mm, the square pin must be 20x20 mm. Sharpened and hammered in. This solution is perfect and will not let go. round can dry out and become loose over time.

@SmokyMountainOutpost 4 года назад

I knew that. Didn’t have time to make them like I wanted to before help arrived. I did good to finish the beams. Wood is still partially green. So I’m sure it will shrink in diameter on the dowel and lock it in. “Saving grace.”

@SmokyMountainOutpost 4 года назад

Also, we managed to finish putting it together late on the evening before everyone had to fly home the next morning. Again “saving grace.”

@carlmannhard8051 6 месяцев назад

Incredible build! You're doing amazing work. At 7:45 I have a question: Can you really put a wooden post like that directly onto the concrete? Don't you need a moisture barrier of some sort so the wood doesn't soak up water from the concrete? Especially the exposed fiber of the end of the post? Thank you for the video and hopefully you, or somebody else, can answer my question. Cheers :)

@SmokyMountainOutpost 6 месяцев назад

I corrected that in a later video by jacking the post up and putting aluminum underneath because it will last longer than regular carbon metal.

@carlmannhard8051 6 месяцев назад

@@SmokyMountainOutpost Alright, that explains it. Again, thank you for sharing your work!