S52 E30 episode 5 | Refinishing Style 42 Wheels 

Rahman R I agree with your opinion. I love style 42s and style 5s

Style 42s are my favorite

I didn't put any clear coat on after, held up nice

henry graham thank you. Definitely stay tuned. More good stuff coming.

Yes of course

They are what came with the oem wheels

8mm

Troy McClure did it mess anything up doing it this way?

No, the only thing that could happen is you strip a bolt. I’d reccomend using low power settings on an impact driver/gun so you dont strip anything.

I did not have to heat the bolts being that I used an impact wrench. Id highly reccomend the milwaukee m12 3/8 stubby for this job. Or any high torue rated impact driver. You’ll also need a hammer to seperate the two pieces

I did not have to heat the bolts being that I used an impact wrench. Id highly reccomend the milwaukee m12 3/8 stubby for this job. Or any high torue rated impact driver. You’ll also need a hammer to seperate the two pieces

I did not have to heat the bolts being that I used an impact wrench. Id highly reccomend the milwaukee m12 3/8 stubby for this job. Or any high torue rated impact driver. You’ll also need a hammer to seperate the two pieces

Yes, they came oem on e39

SteelRinger duplicolor gold wheel paint, I believe there is only 1 shade of gold they sell

Brenden Serna I'm on there but more active on az e30s

i think technically you can, i definitely would not recommend it. Messing around with wheels while tires are on seems dangerous

You can if your tires are deflated all the way. Inflated tires can cave in the barrel of the wheel