Thanks for you good step-by-step videos with explanation. My Philips Saeco Intelia is suffering of this always activated thermostats when we use the streamer. I bought two thermostats with reset buttons (at 190 C) and I changed them along with the thermal paste. I also changed the paste of the machine thermo sensor but the issue is not resolved. Do you think there is some other possible reason for this constant overheat to happen? I think when the boiler is heating for coffee there is no problem.
Hello tahnku for the video. I do like you show on the video to restart the recovery. Everything was working fine till this day. After I switch on machine water drop and triangle are blinking and the hot water button is lighter. After I push it the warm water is flushing throw the steam pipe. It's making few flush and after that all red light are blinking like with the problem of boiler. But after I reset machine from the behind switch the proces from the beginning starts over. Iwas trying to put some decalc to the water and flus few times but it doesn't help. Also I go to the test mode and chuck that all systems are working good. Please help!!!!!! Where is the problem.
Hello, I have the same machine and the water is not heating up. (I tested this is the machine test mode). Could the problem be these thermostats? Is there any way to test if they have blown? Thank you.
Thanks mate awesome vid. Ive been in diag Mode, pressed heater Button, then temp went up and up, Warnung came up > 120 degrees, i Think you have to leave the menu once you see it ride. I restarted, then the thermostat was gone.??? Also solenoid valve is leak, tried to fix, dient work so ordered a new one. Thanks for your vids!
Thank you for the great videos! We have a Saeco Easy and the thermostat keeps tripping and shutting down the boiler after each coffee brew. It has the older style thermostats with the buttons. We turn off the the machine and turn it on and it works again, but only for one cup. Any idea why the boiler would keep tripping the thermostat? Water flow seems to be fine.
Здравей, Ако е заминал не трябва да звъни при проверка с мултиметър, нали така? Имаме една Xsmall, на която бойлерът не загрява и се чудя дали не е това причината.
Hi i have a saeco odea go machine with the problem that trester and water heating led flash alternately. In testmode i can not move the brewgroup.when i remove them the motor move. What else should i check?
Hello! I replaced the thermostats and after four days the same error, the four red LEDs flash again :-( Maybe you can help me with what could be wrong. Thanks.