Sagging Door Fix: 1999-2006 Chevy GMC Truck, Suburban, Tahoe, Yukon, Hinge Pin Repair Kit Video #1

Подписаться 25 тыс.

Просмотров 48 тыс.

50% 1

Follow Up Video #2: • Hinge Repair - Bolt-On...
Doing a repair or project?? Want to be part of a Friend's Edition Episode? Interested Subscribers should contact Rob at RM@Axlesgarage.com Absolutely NO-EDITING skills required.
Hinge Pin Kit (c-clips): amzn.to/3ELMY1L
Hinge Pin Kit (nut retainers): amzn.to/2ZswYS8
Kit with Brackets (nut retainers): amzn.to/3CYqh8B
Support the Channel & Visit our Amazon Store for links to the products we use in our videos: www.amazon.com/shop/axlesgarage
Instagram: AxlesGarage
Twitter: @robmirabile
Facebook: @axlesvideos
Don't forget to check out AXLE'S KITCHEN
Instagram: AxlesKitchen
Twitter: @AxlesKitchen
Facebook: @Axle'sKitchen
Video Recorded with Canon Vixia HF R800 here: amzn.to/2C8QLo9
Wide Angle Lens: amzn.to/2BQYSdh
Extended Run Batteries: amzn.to/2H1XLaa
Disclaimer
**This channel is for entertainment purposes only! We here at Axle's Garage are hobbyists, not professionals. Do not do what we do. Do not take our advice. We are not professionals. Our automotive, home, cooking, outdoors, reviews, project content, rants and vlogs are just to document what we do, how we try to figure it out, and what result we have. Our techniques often fail and we try to demonstrate that as well. The methods we use may be completely wrong and/or dangerous. Please seek professional help with anything and everything and do your own due diligence (research). Home projects and DIY repairs can be extremely dangerous. We are not responsible for any loss of life or limb or property. DO YOUR OWN RESEARCH. THIS CHANNEL IS FOR ENTERTAINMENT PURPOSES ONLY!**
Axle's Garage is an Amazon Influencer and a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

Авто/Мото

Опубликовано:

22 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@garyhickman9768 2 года назад

I appreciate the fact you did not edit out your mistakes; we all make them and by seeing yours we know what not to do.

@AxlesGarage 2 года назад

Thanks

@JohnBaker-s6t 22 дня назад

I replaced the pins in my 2002 GMC Sierra. The door is a lot better but it was still low in the back and did not line up correctly. I took a 4 by 4 and a floor jack, Put the 4 by 4 under the flat part on the bottom of the door towards the rear of the truck, closed it as far as I could with the 4x4 underneath, put the floor jack underneath that and jacked it up literally bending the door slightly. that fixed it and now it works as it should.

@freedomrest Год назад

Either you had no clue what you were getting into- or spent a lot of extra time to allow the viewer time to absorb and digest just how hands-on this task can be (that's a compliment BTW !!)... Also placing the pins in the freezer overnight will allow them to slip into the bushings easier. Great job, great attitude and great example of patience THX !!!

@AxlesGarage Год назад

I had never done this before, however in an update we used the bolt-style. The clip-style in this video did not last

@farmboyhh1 3 месяца назад

Thanks for the great video. I have hinge pins coming on Monday for my 2002 Silverado with 256,000 miles on it. One suggestion I will make regarding the removal of the hinge pins when you get the bottom ground off and this comes from my experience working on a lot of old houses and having to remove hinge pins that are stuck in place with rust or paint. Clamp a vice grip onto the top of the pin and twist it back and forth a few times just to loosen it up. When it's loose leave the vice grip on and tap the underside of the vice grip upward with a hammer and it will come out pretty easily.

@dustincashwell31 Год назад

My door has been whistling air for a few days now and driving me crazy, saw the door hinges were loose but had no idea how to change them. Thank you for making a straightforward video on how to replace them. You rock!

@AxlesGarage Год назад

You're welcome! BUT watch the follow up video and use the other style

@vernonjohnsonjr.1809 Месяц назад

Good job

@Milfmagent Год назад

"Hinge pinges....He's always gotta start a car while I'm talking. That's the big dummy, he's leaving." Your awesome man, thank you for the help and a laugh.

@AxlesGarage Год назад

Glad you enjoyed

@andyyarnell7579 Год назад

Good information. Best part of the video is at 28:28 when the Myers Manx turns the corner in the background. Also, don't you hate it when you're trying to record a how-to video and your neighbor decides to mow the lawn!

@AxlesGarage Год назад

Thanks for watching

@delvinbegay1502 2 года назад

More realistic than the other videos I seen. Thank you.

@AxlesGarage 2 года назад

Thanks for watching

@cameronshellman3579 8 месяцев назад

Man i sure do appreciate your video brother. You just saved me so much money and heart ache lol thank you again

@AxlesGarage 8 месяцев назад

Glad I could help, please see the follow up video

@ScottWConvid19 Год назад

I saw those C-clips on other vehicles, too. As Murphy's law would have it, mine were pressed in also. I had to grind them. Fun, fun fun. .lol Thanks for the upload.

@AxlesGarage Год назад

C-Clip set didn't last long, we made a follow up video and installed the bolt on version. Here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mCqL222qo1s.html

@ScottWConvid19 Год назад

@@AxlesGarage cool. I installed the bolt ones too. They just looked like they'd last longer

@dalemills8052 Год назад

Very well done and very informative video. I've watched several others on here and was lost or wondering about different things. To me the bolt on one's look a bit easier to do. Thank you very much. Oh and thanks to your tripod at the beginning.

@AxlesGarage Год назад

Glad you enjoyed it!

@ancient_shadow7157 11 месяцев назад

Wish me luck. Im about to do the same job except replace the entire hinge just cause I have no way to grind those pins off. Hopefully this heatwave doesn’t kill us trying to get it done

@garyhickman9768 2 года назад

Kudos to Amanda for great camera work!

@AxlesGarage 2 года назад

Yes she did a great job

@MattTZew 2 года назад

I've done this twice on my 02 Silverado. And I did 1roads hack of fishing foam through the weather stripping

@AxlesGarage 2 года назад

I'm gonna have to look at that hack

@Stay-Loud Год назад

Hey I appreciate the video bubba! Thank you!

@AxlesGarage Год назад

Glad to help, check the update on that video in the playlist, better options

@espenschjelderup426 Год назад

Nice video 😊 I changed hinge pins on the passenger door on my Tahoe 4-5 years ago, and recently did the drivers door. But I had forgotten that 4 pins is needed, and get the plessure to do it again on the drivers door in a few days 😂 I used the hinge pins with a nut. Only thing I would do different from you is to not put on grease before pushing in the bushing.

@AxlesGarage Год назад

Agree on the grease, in a follow up video, I replaced with the nut version. Much better

@davidtimmel4027 Год назад

The original factory pins have to be ground off for removal. Apparently, this truck has never had door pins replaced before.

@AxlesGarage 11 месяцев назад

Yes, and a follow up video on this in the playlist

@sgomez5457 2 года назад

June 25, 2022 thank you for the video has a lot of good information

@AxlesGarage 2 года назад

Glad to help

@TrueQT78 2 года назад

Thank you for this video! I appreciate you letting us know all the things that worked and didn’t quite work. I’m going to attempt to replace the hinge pins on my daughters 04 Escalade this evening. How long did you have to actually grind the bottoms of the pins before they were able to be punched out? Again thank you and I will definitely be subscribing to your channel!

@AxlesGarage 2 года назад

Glad it was helpful! Not to much grinding to get them out. Easy task with a flap disk. However look in the Suburban playlist as we had to do it a second time with a better type of hinge repair kit.

@tonyrockit295 2 года назад

Thank You for being informative and not hiding the little steps that can be frustrating.Do you recommend the hinges you installed?

@AxlesGarage 2 года назад

NO, I did an update video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mCqL222qo1s.html

@shernandez505 Год назад

Thanks for the video. 👍 I’ve got the same issue with the door to my my 2006 Chevrolet Tahoe Z71. It’s ever so slightly off. Maybe using a jack with something to protect the door to keep it in place or held up on bottom of door when putting the door back on hinges if someone does not have a helper? I’m going to try that and see how it goes when I do my hinges.

@AxlesGarage Год назад

I did a follow up video, using the kit with the bolt on pins, much better.

@ScottWConvid19 Год назад

Just for anyone's info on this, if you don't change the hinge pins and your door sags, it will eventually break your door lock actuator, which will eventually damage the switch inside, causing the door ajar light to go on and will drain your battery within a week of not using your vehicle because there will be a constant draw on the battery, signaling the door is ajar

@AxlesGarage Год назад

Thanks for the info

@Jack-ne8vm Год назад

Instead of unhooking wires, what if you lifted door off hinges & hung it with straps & move door only enough to fix hinges? Squeeze the pins down with big channel-lock pliers.

@AxlesGarage Год назад

I feel like the door would just be in the way

@BuggysTowJam 2 года назад

Very good informative video Rob! Liked! I need to do this to my 2000 Chevy 3500hd drivers side door. I'm glad to see also that the Dorman pins seemed to do good. A month later any issues? Or all good?

@AxlesGarage 2 года назад

To be honest, it only lasted a few days. Still sloppy, I think I have to replace the c-shaped brackets as well. They sell them in a kit with the pins.

@mikecochrane2074 2 года назад

@@AxlesGarage I noticed with the hinge pin kit I got, the bushing and pin didn't feel tight together anyway, so I am debating on whether I should even go through with it. It doesn't make sense that there would be that much slop in the new bushings. Do you think I should hunt out a better branded set?

@mohammedal-hawaj9105 2 года назад

Like the k5 blazer on the back.

@AxlesGarage 2 года назад

Thank you, we have lots of K5 videos on the channel.

@Longneckmexican Год назад

What year is your K5 88?

@malden1056 2 года назад

I have repaired the hinges on my Suburban 2 times and I never did it this way. I supported the door from below using a floor jack and jig like in the factory. Jack it up and remove the hinge.

@AxlesGarage 2 года назад

Yep, that works too.

@nategoalbevazin1387 2 года назад

yes, thank you for this

@AxlesGarage 2 года назад

My pleasure!

@jewllake 2 года назад

do you still have the white short wheel base denali?

@AxlesGarage 2 года назад

Yes, videos coming soon.... we had some issues with it

@jeffpolakiewicz2277 Год назад

OWWWWWW! My freakin' finger!

@AxlesGarage Год назад

Thanks for watching

@ChiefxWop 2 года назад

great video 👍

@AxlesGarage 2 года назад

Thanks for the visit

@togetunthemood43 Год назад

will you please do my truck I'll pay you 🤣

@AxlesGarage Год назад

I wish I had the time

@arnoldromppai5395 Год назад

HAVE HAVE YET TO FIND A REPAIR KIT THAT LASTS LONGER THEN A YEAR, I DONT KNOW WHAT KIND OF BRASS if even bras, as the shatter in no time and the door is far worse then it ever was my 1993 k1500 there is no bolts to remove, each half is welded to post an door, i set a 5 gallon oil pail under the door to le it rest on. i dont remove any wires or boot/

@AxlesGarage Год назад

We found one in this follow up video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mCqL222qo1s.html

@arnoldromppai5395 Год назад

@@AxlesGarage my Chevy k1500 has no bolts at all, each side of the hing ir welded to the door and the door post, it one long pin the runs down though all 5 holes on each hinge, there a spline an flat head on one end, that has to be pressed in, the brass bushing ether brakes up as you press it in, or with in a month, a cap is hammered down on top of pin once its in,, the brass bushing brrake into peaces

@Torontotootwo Год назад

HA! Very rare to see an unrehearsed repair job on the tube. Others make it look so simple because it was not their first time. And if we could have two wives, removing and installing the door would be easier. But if you could afford two wives, you could just buy a new truck. Maybe now I'll scare the courage to do this myself...

@AxlesGarage Год назад

In all it's any easy fix, look for my follow up video where I use a different style pin.