Salvage Jet Ski Swap: Transferring Totaled 2023 SXR to New 2024 Hull

Подписаться 17 тыс.

Просмотров 7 тыс.

50% 1

Join Jet Ski Jim on an incredible journey as he tackles a unique project: transferring parts from a totaled 2023 SXR with low hours onto a brand new 2024 showroom model hull.
Watch the meticulous process as we strip down the damaged jet ski and breathe new life into a pristine SXR 2024. Get expert tips, insights, and a behind-the-scenes look at this remarkable salvage jet ski swap. Don't miss out on this exciting transformation!
Subscribe for more jet ski projects, rebuilds, and thrilling adventures with Jet Ski Jim!
🚤🔧 #JetSki #SalvageJetSki #SXR2023 #SXR2024 #JetSkiRebuild #JetSkiSwap #JetSkiJim #SalvageRebuild #TotaledJetSki #JetSkiLife #Watercraft #DIYJetSki #JetSkiTransformation
Operation Yellow Submarine
@FabRats
Sunken Boat At Bottom of Lake Powell Emerges After 30 Years
• Sunken Boat At Bottom ...
Recovering Sunken Boat At Bottom of Lake Powell After 30 Years
• Recovering Sunken Boat...
What's Next For The Boat That Was Sunk At The Bottom of Lake Powell For 30 Years?
• What's Next For The Bo...
Reuniting The Owners With Their Boat That Was Sunk At The Bottom of Lake Powell For 30 Years!
• Reuniting The Owners W...
Boat Re-surfaces after 30 Years Underwater And Is Now Better Than Ever!
• It’s Been 30 Years Sin...
Will This Turn Into Being The Worst Decision I've Ever Made Or The BEST??
• Will This Turn Into Be...
We Had No Choice But To Do This!
• We Had No Choice But T...
We Drove Across The Country In An Unusual Way Towing A Remarkable Story!
• We Drove Across The Co...
@MerlinsOldSchoolGarage
The Yellow Submarine Floats One Last Time Before Going Home
• The Yellow Submarine F...
It All Comes Down to This! Will The Yellow Submarine Sink or Swim?
• It All Comes Down to T...
You Won't Believe What Paul Found in the Yellow Submarine After 30 years Being Under Water!
• You Won't Believe What...
Unbelievable! The Yellow Submarine Engine Starts Up After Being Under the Water for 30 Years!
• Unbelievable! The Yell...
30 Years at the Bottom of Lake Powell... The Yellow Submarine Arrives for Tear Down
• 30 Years at the Bottom...

Спорт

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@kevbev1524 Месяц назад

Thanks for saving that poor old racer.❤

@robertr4193 Месяц назад

I can tell that you have done this sort of thing more than a time or two. I'm pretty sure most people would need 3 hands or someone to help with some of the operations it takes to put a jet sky together. You just juggled things around and boom it's done.

@thomasjarosz7406 Месяц назад

Love watching Anyone Fix Anything. Great Content Jimmy. God Bless

@taurota1554 Месяц назад

Outstanding and awesome content as always.Thanks for sharing and taking us along

@diesel46809 Месяц назад

Good morning jet ski Jim. Looking forward to another awesome video

@alkennedy1124 Месяц назад

Merlin and McKay picked up some free99 leather, nice , 118 in the shade, hot , yesterday, thanks BigAl California, I could never stand up on a jet ski, lol thanks

@ruffpizza Месяц назад

That Merlon can talk anyone into doing anything.

@aldenwolf7313 Месяц назад

120

@deadengine Месяц назад

Wow the 2024 hull is sleek. I like it. That's crazy, some people gut them.

@RyanMcIntyre Месяц назад

The parts go into Kommander hulls, pretty wild

@Chancebauer Месяц назад

because they handle like shit compared to a GP1

@KrisD007 Месяц назад

@@RyanMcIntyrereally?

@badm0t0rf1ng3r Месяц назад

I liked the SXR but when I saw the 2024 I had to get one. They are SO SO much better looking. I liked the bronze accents from the 2022 as well. Great video!

@eddavis447 Месяц назад

That was a fun build Jimmy!

@Kristof-Kay Месяц назад

great video Jim, i really enjoyed seeing how you put everything back together, thanks for sharing

@BuckleyBuilt 6 дней назад

Hi Jim. Im Rick Buckley. I’m new to your channel but long time friends with Timmy since we were kids. He turned me onto your channel after I reached out to him on some old-school jet ski advice. I can’t stop watching all your videos and I think you do a great job with it. Did you happen to sell this salvage swap yet? Looking forward to meeting you someday.

@1959greatbear Месяц назад

How do dispose of the totaled or old fiberglass hulls?

@KrisD007 Месяц назад

I bet that's an interesting story.

@arte9855 Месяц назад

@@KrisD007if it's beyond repair like an old fiberglass shower enclosure 😂 cut off wheel and or sawsall and in it goes to the weekly trash pickup. It's really not that difficult.

@RyanMcIntyre Месяц назад

Is this a unique opportunity to get a ski back on the water, or are wrecked skis pretty available out there? Fun video as always, thanks for letting us hang out with you this morning 👍

@jetskijim007 25 дней назад

They are pretty tough to find. Wrecked sit down ski's are a dime a dozen though. :-)

@DesertSurfer Месяц назад

I was looking at that hull. Think it was in Phoenix

@crbrepairmotorcycles6608 Месяц назад

Thanks for the welcome back, I couldn't ride a stand up one you'd have to to get me a sit down one because my legs don't work so well anymore, sure have a cool shop and projects

@ryanmvieth Месяц назад

RIP to your ski Garrett 😅

@johnoldonekanole602 Месяц назад

Looks a lot different than they did in 1976. We were friends with a Kawaski rep and every wk end we went to lake with him and his 6 demo jet skis, all he had to do was let people ride them. My 6yo son learned how to run one and antagonized a guy on a Yamaha? wet bike. I am old now but the memories were great. Thanks for sharing. Great job you are really talented.

@mattnemecek2996 Месяц назад

Hi Jim! In another video you mentioned something about owning airplanes. Did you fly for the airlines? Love all the standup content!

@jetskijim007 Месяц назад

No, i am only a private pilot. Since 1992.

@mattnemecek2996 Месяц назад

Nice! I fly for the airlines, and when we go to Vegas, I always wanted to check out the Havasu area and stand up mecca. Thanks for replying!

@REICapital Месяц назад

Love the info, Great work Jim!

@R1Kyle Месяц назад

I say bore the jet pump out 2mm and push the bilge fitting out towards the front of the ski a 1/2 inch getting some of it out of the jet stream. Those stock handle bars are beyond junk uncomfortable things. I used a set of stock KTM bar clamps I had lying around, drilled one new hole to mount them on the stock steering plate and then used a straight 0 deg fat bar. That gets your bars forward which these machines so badly need with the stock pole.

@kyles6634 Месяц назад

Jet ski Jim - I have an early 90s X2 with ignition problems. If I made it out to Havasu, would you have a minute to help me determine the issue. She's ready to ride besides that and I'd like to get her on the lake. Thanks!

@wadericker4795 Месяц назад

Great video! Question what is the fastest Jet skii that is factory built? What is the fastest jet skii custom built? 💯👍

@jetskijim007 Месяц назад

Stand up jet ski's the fastest from the factory is the kawasaki sxr at 60 mph. The fastest built currently is pro watercraft built with a sea doo supercharged engine does 75mph. On the sit downs, i think the industry limits them to 70mph off the showroom floor, but there are guys building them up to and over 140mph.

@wadericker4795 Месяц назад

@@jetskijim007 wow that would take some courage to ride that fast wouldn't it? What is your personal speed limit? Have you ridden at 140?

@jetskijim007 25 дней назад

Lol, Lot of Courage. :-) My personal best is 67mph on a standup, and 92mph on a full blown race sit down (it accelerated so violently it had a sit in form fitted seat so you didn't slide off the back every time you throttled through a corner. :-)

@wadericker4795 25 дней назад

@@jetskijim007 oh boy wow

@austinday4368 Месяц назад

Shot in the dark here but iv been watching your older 550 video and I started a 550 restoration build of my own so I was wondering if you had any old stock parts that you would sell ?

@jetskijim007 Месяц назад

no, Sorry, I stopped collecting 550 parts many many years ago. I sold the last of my inventory during covid when they were selling at 2-3 times there value.

@austinday4368 Месяц назад

@@jetskijim007 that’s okay a smart collector always sells when prices are tripled🤘🏼

@leonardburkhard812 Месяц назад

Hi Jim, I swaped my oem mikuni bn44 for a sbn 44 on my js 550. Do I Need the Original rev Limited installed in the 550 if I use the sbn44?

@jetskijim007 25 дней назад

If you let off the throttle as the ski comes out of the water, then no. If you ride with the throttle zip tied wide open the entire time you are on the ski then yes, you should run the rev limiter... :-)

@R1Kyle Месяц назад

How can I get ahold of you, I have been looking for a couple hulls and some info.

@wed3k Месяц назад

I think they get them some komander industries

@sortofkindofhandy6944 20 дней назад

Jimmy nice work - found you from Merlin and watch you over there, watched a bunch here now. Any chance you have a good bone yard for watercraft down there - I'm in desperate need of a intake plate for a 2007 Seadoo Challenger 180 - Seadoo Part # 204120294 from my understanding and it's discontinued. I up in Canada land, Alberta specifically and have had zero luck sourcing one up here. I know it's a long shot but if you know a lead, can help a guy in anyway it would be awesome. Short of that, I guess I'm buying one for like an RXP and taking the old knife to it and welding in something. Doesn't look like I can source one aftermarket either. Anyway keep up the entertaining content, between the Ski river adventure, fixing them at Merlin's, and your content it's why I bought a jet.

@jetskijim007 7 дней назад

No, unfortunately they all left years ago. Those are hard to find parts for.

@sortofkindofhandy6944 12 часов назад

@@jetskijim007 thanks anyway. guess I'm going the Fab route....