I have troubles laminating s8. Using Ocamaster alignment mold and laminating mat newest version and TBK 808 Laminator. Setting ist 60s vac 60s laminate 600s debubble. Still there are zones where laminating failed and some small bubbles on the edges. Any suggestion? OCA Sheets no good Quality?suggestion? OCA Sheets no good Qualitys? Tank You
My s8 plus all sensors not work suddenly.. Proxymity Light Iris scanner... Auto rotation also ..this problem come when i washed my s8 plus motherboard with thinner..before wash all is good as U have solution
Hello, the screen of Samsung S8 is not displayed. If the motherboard is still not displayed, it should not be a problem with the motherboard. You need to change the screen.
Will there be any problem after changing the touch ?? Will it work for a long time? I'm about to change my S8 plus digitizer .. is that okey if I change that digitizer ?? Suggest me bro .. Yes or No
Only one clip where change touch screen in whole youtube! Can You please do the same but laminate touch digitizer with polarizer together. And I can't uderstad old touch removed or left on screen?
His state is only to separate the LCD screen from the outside cover. There are currently two methods: 1. Separate the screen assembly from the middle frame with a heating separator, and then separate the LCD screen and the outer glass with a heating separator and 0.05 wire. 2, using a cryo-separator (180 degrees below zero) to achieve the separation of the outer glass and the middle frame of the LCD screen
nadie los hace men, es muy riesgoso, por eso aunque solo sea el touch el que esta dañado, te cambian todo el panel (pantalla y touch) nesosi lo hacen en todos lados y cuesta como 4mil la reparacion, en el s8
@@cambofixing don't be a fine ass0 if u don't read Spanish use a find translate... I'll report you for racist.. why you don't ask the other people to write in English.
