Samsung S23 Whitestone Dome Glass Screen Protector : Install Guide 

🛒Buy Direct and Save!: bit.ly/2XLtQPm Buy on Amazon 🛒amzn.to/3JWNygv Samsung S23 Ultra 🛒Buy Direct and Save: howl.me/ci2LcU1X68Z 🛒Buy on Amazon: amzn.to/3TTvB77 🛒Buy on BestBuy: bit.ly/42MpdCN Buy Silicone Grip Case 🛒 amzn.to/3zhHFFA Buy Leather Case Camel / Tan 🛒rb.gy/ngv3 More Cases at BestBuy! 🛒bit.ly/3G20X5C Massive Spigen Case Review S23 Ultra: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jEyrg3lG_hQ.html More Cases at BestBuy! 🛒geni.us/NZfn

If you keep getting dust on the screen before you put the protector run a hot shower in a bathroom and do it there 100% you get dust-free installed

Thank you so much for this great step by step installation for the 23 ultra. When I opened the box I immediately froze. It looks overwhelming at first. I watched your video 2x just to make sure. I was then able to complete my installation and it turned out PERFECT!!! Patience is your friend when installing this screen protector. I will always use this screen protector for any phone i have from now on. I LOVE IT!!!!

I just installed one on my new S23 Ultra, and got a perfect install. I always use Whitestone Dome glass protectors.

I've had this screen protector for both of my previous phones and it's amazing... However, once this screen cracks its a NIGHTMARE to take off. The adhesive liquid is so good that you have to crack and chip at the glass until it is removed which is a extremely messy process which involves wearing safety glass to prevent dust sized bits of glass from flying into your eyes. Like it said it lasts months to over a year until it cracks. I've never purchased another because I can't be bothered going through the removal process which takes 3x the amount of time of installation. This is just a heads up for you to consider purchasing this. Feel free to ask me any questions regarding the whitestone dome.

The rubber square is new and a good idea. 👌 On previous WSD protectors I've always gently pressed down in the fingerprint scanner area after the first curing and then second cure with the uv light which helped. Having a level work surface is key so your not having to move the jig around because the glass protector is floating on a layer of silicone glue and can move around if the jig is disturbed. And then your not also having to touch the protector to tease the glue to the edges. The WSD seemed a little too brittle for the Samsung Galaxy s²² Ultra as mine kept picking up nicks along the edges_ and I do baby my phone. I've used x4 since the phone launch date. Hopefully the s²³ version is a better quality. Thank you for sharing your fitting experience. 👍 Appreciated.

Just installed mine following this. Thanks so much!! Seeing this in action made it much easier!!

I‘m glad I discovered your video - since the S24 series launched, I decided to give my S23 Ultra some love and got the Whitestone dome tempered glass, and I was worried about case compatibility, I’m glad you showed compatible cases, I got the Mous Limitless Aramid fiber, works perfectly, love it 👍🏼 Thank you.

Ordered white dome for the first time, you don’t make it look too complicated! Most of it is just setting it up.

Great content. I used at least 20 different glass screen protectors on my note20 ultra. And every time with the supcase unicorn beetle pro, poetic spartan, and otterbox defender pro, the screen would always lift. No matter how much I curde it. So I finally got the AMFILM elastic skin screen protector, and never had a problem.

The only reason i bought this protector is because i watched your video and seen it was compatible with the spigen tough armor case. I tried plenty of different screen protectors and none of them stayed on the screen due to lifting. So if you do got the Spigen tough armor case and want a screen protector that doesn't lift this is the way to go. Thanks for the video.

I'm always wondering why make such a big fuss about screen protectors and cases...! The S23U comes with Victus2 glass. Now, there's choosing a color we like, but then... we cover it's color with a case. Do you get my point here... BTW, loved your video (1st time view, and decided to subscribe), you're a sharp speaker, no pun intended, all the nitty gritty details are articulated with precision. Thanks, till your next video 😀

There are several vids of installing Whitestone Dome glass but this is by far the best!! Keep it up. I appreciate quality content....

For those who are having trouble with the screen protector in terms of bubbles. When I did this process on my s23 ultra it took roughly 3 minutes for the screen to be fully covered. One thing they changed from last year is that the acrylic/plastic stick or ruler is no longer used. Which means the process takes longer. Be patient. Saying all this because of what I've read over on Amazon reviews.

My first attempt at installing the Whitestone glass protector on my S23 Ultra was a disaster! For some reason, the glue didn't cure and the protector slid off my phone. There was glue everywhere. I was really upset! By the next day I had calmed down, and proceeded to create revised installation instructions, based on my previous experience. The second try went perfectly. Edit #1: At first, it seemed like the fingerprint sensor was working well, although I had to re-do my fingerprints. However, over time it became apparent that the fingerprint sensor was not working very well, which was disappointing. I will probably replace this screen protector with Whitestone Dome's PET protector. Edit #2: Now I can confirm that the fingerprint sensor on my phone works only every now and then. That ends it for me. A terrible install experience and now this. I'm getting rid of this screen protector. Nevertheless, thanks for your video - it was very helpful, and the best part of my Whitestone Dome experience.

My experience corroborates his experience. My Unicorn Beetle Pro Case did EXACTLY what he said, except not over time, but damn near instantly. Love the case, love to protector; they're just not compatible.

Thx!!! Great video, I screwed up my 1st two attempts with the Dome on an S23, the glue didn't quite make it to the top. The suggestion about tipping the phone to get it to move where you need it is exactly what I needed!! Appreciated!

Thanks for this detailed video install guide. This video definitely helped me that this protection is one of the best one.

Thanks for this video, Jabber Tech. Hit lots of points viewers were looking for 👍

Installed a dome glass on my S22U about a year ago and it's still in mint condition except for some dust built up on the edges.

Thank youuuuuuuu We need you experience with the S-pen, Is it smooth like original glass ? How about clearness, color diminish whitish ? Is that liquid safe on screen? would left any smudges after it's removed? thnks again

Best tutorial ever. Was able to install mine with no single issue at all. Question tho, would you really recommend the diamond case because it feels cheap to me. I'd rather get an Spigen I guess.

Thank you for sharing! Their own guide wasn't as clear as yours.

Thanks for the video! Would have been nice to see how the finger print reader works though!

I see no reason for a screen protector anymore. A good case provides the best protection possible while not using a screen protector gives you the best experience in both touch as well as viewing terms.

Mine went on without a hitch and the fingerprint reader works as if no protector is installed. Cured it a bit and then pressed the rubber for 10sec and cured it completely, there is no visible protector apart from the camera slot at the top. Best protector you can get

It is not necessary to press the weight in the place of the impression. I installed it without oppressing, just waited the right time and it works perfectly, like factory, without increasing sensitivity. Although I was personally scared when, putting the weight, the glass moved slightly in the frame, because the glue is not hardened and slightly leaked at the bottom. Don't worry, just after the pressure time, slide them into place with your fingers before using the UV lamp to cure the glue, nothing bad will happen. That's from my personal experience. And S23 Ultra is my 5th assembly of this glass. I recommend it to everyone, there is no better protection.

Whitestone Dome is the way to go

I hope it works with the Dbrand cases.

Maybe a video on replacing this Dome glass protector if it cracks...🤔

Great review man! Well done!

Wasn't better if place that rubber pad during the fluid is covering the screen, was it? So, you'll be sure no liquid glue on the fingerprint reader area, right ?

Kindly reply to me about your experience with the mid line and is it completely gone now?

Had one on my s21, and just put one on my s23 ultra, I swear by them tbh. They are on a totally different level to regular stick-on protectors.

Great video but u think the s22ultra white dome glass will also work on s23ultra since they have the same screen size

Would it not be better when the weight is rather put on there before the spreads. Your opinion. Also what of the pen feel on the screen

I need to get the Spigen Tough Armor! Looks great. Do you recommend it?

Hi thanks a lot for your product review. Appreciate this

Hey man great video....I just ordered the minoldo? Tempered glass...doesn't have the glued process, but I hear white stone dome is best for falls....one question...how did the camera on the front not get glued on it?, glue just says where the glass is? and just doesn't even head out that way? If so very cool...I need a case that can take a good drop like from doing pullups at the gym current phone had popped out before ....wow, I would love to have this screen and your the third person I seen installed and I like it 👌.

"Just a few steps.. nothing complicated" 20 minutes later.. 😀

Hi, what about finger print scanner? Is it working fine?

How is this for fingerprint smudges? The last protector I had on my Note 10+ wasn't very smooth and left lots of smudges during use. Also, are you seeing light refracting at the top of the protector where it isn't aligned with the top? Saw some reviews mention this on Amazon and that would really annoy me.

Can you please confirm if this product can fit together with UAG Monarch? Thanks!

your wallpaper is amazing from which app have u downloaded please can u provide the link.

What's the accurate finger print rate would you say? Last year when I got the s22 ultra and tried it was horrible. Switch to film screen protectors bc I couldn't deal with it lol

Had one on my note 20 ultra good luck trying to get it off att didn’t like it to much when I traded my phone in.

Hi great video tutorial however when you did the same for the S22 ultra you pressed about 6/7 times where the finger print sensor is in-between the 1st and 2nd UV cure would you do the same for this installation

I like your wall papers :)

Hey! Nice wallpapers on your home and lock screen. What app do you use for the wallpapers if you dont mind sharing?

I was wondering if you have any experience with this brand for the samsung fold phones? I've tried several brands but unfortunately all of them failed and started getting loose in the middle section right where the phone folds 😬 thusfar I haven't found one that actually stays put.

Thank you for this video.

The clarity is amazing but I have struggled with the durability in the sides, in my S22 ultra the screen protector got broken easy

the spigen one doesn't need glue or that uv thing

any clear case that works with this screen protectors? I've searched ones on amazon but i keep reading comments of the cases pushing up against curved screen protectors like these./...

Have you tried Whitestone Dome on a supcase for S23 ultra. Having trouble finding a good glass screen for yhat case with kick stand. Thank you.

Is it easy to remove it?

Great video!

Is it compatibld with spigen tough armor cSe?

What about finger print??? Works good???

Does screen protector work good with the fingersprint scanner Jabber ? I had installed Zeelot tempered glass for my s22U before but it worked badly with the fingersprint so i have to install the official screen protector of samsung and it works 100% good. Dont know whether this Dome SP can work 100% good with fingersprints scanner, pls answer me. Thank you very much❤. Good video btw👍🏻🔥

Try ringke fusion x please, i cannot find tempered everywhere compatible with ringke. In indonesia dome glass cost idr 800.000 so expensive. I’M afraid rungke will make tempered glass peel on the corner side

Where did you get those wallpapers from!?

Will this work for a VRS Design Damda Glide Hybrid Wallet case?

OMG What a disaster! I've installed these before with no problems but this time all the glue spilled out the sides both tries. I don't think that the rig is level. Mine must have been defective. Fortunately with the prep work and everything covered, nothing was damaged and it was fairly easy to clean up, but never again...

Hi, compatible with otterbox defender case?

Which case is the most durable if ya drop it?

Bro pls tell me wallpaper app you kept....❤

Does AUG Plasma series case compatible with whitedome glass?

Is that a skin you put on your Unicorn Beetle Pro case?

Phone $800, screen protector $2000. 🤣

Will uag work with the screen protector

Can you review s23 ultra quadlock mag case?

Where did you got your wallpapers? Thanks

Does this cover the whole edges

Where did you get that awesome Joker wallpaper friend?

They should makes this even more foolproof....there shouldn't be any "excess" glue if they know the exact dimensions of the screen.

How's the fingerprint sensor after installation?

This is one of my bigest issues with stupid curved screens. They crack super easy, and screen protectors are crazy expensive while the true cost of those protectors is just few bucks. Disgusting.

What did the rubber pad over the fingerprint area do exactly?

thanks so much for this hack bro

Can you easly remove it without damaging?

Can I get the link the wallpapers, thank you in advance

just put on whitestone dome glasss screen protector. Followed instructions but got big bubblle near center of screen. Hate product.

So if I need to remove this will it mess my screen up?

How about uag plasma?

Where you get those wallpapers?

What about ringke fusion x?

mouse case also works with it

is the glass screenprotector curved?

Love Whitestone products, just hate the fact that they are not compatible with framed cases

wish I'd gotten Whitestone. I got amfilm and now my S-pen is stuck inside the phone.

I installed it perfectly but the finger print reader reliability took a huge hit. It works the first time maybe 20% of the time. Spigen made one for my S21 ultra that works perfectly but it’s no longer sold. I can’t use this phone without a screen protector so I will be returning it. Shame.

Watch from pakistan 🇵🇰 dude

Great

Thank you for posting . ..but way too complicated for me ...glue in phone ? Yikes . I will pass but you did a good video.

3:53 The sides are not Stainless Steel but Aluminium.

What happens if you want to remove the glass once it's cured? I mean, is the glue easy to clean?

did youre ultra came with a preinstalled screen protector?

For the info i would like to say that Samsung will avoid your warrenty if the service center found out that you are using UV screen protector. No one knows about this new policy.

You are a Muslim ☪️ brother you deserve a sub 💜🖤💜🖤