Тёмный

SandBlasting a narrow boat hull 

Mick Blackley SandBlaster
Подписаться 41 тыс.
Просмотров 3,5 тыс.
50% 1

SandBlasting a narrow boat hull. if you enjoyed the video press the like and drop a comment would be nice to hear from you I read every comment and try to reply to everyone 😊
2 X LED Head Torch Rechargeable 12 Hours Runtime IPX4 Waterproof
2 Pack £19.99 Fast free delivery with prime can be found here.
amzn.to/3Zw4zFD
1x Work light fits 1 1/4" blast pipe a little baggy but works real world 3 to 4 hour run time I advise getting 2. Work with 1 and another on charge in the van 12v or 240v :) charge time approx 6 hour although these are waterproof real world the on off switch needs some improvement when it dose eventually stop working its likely to be a switch fault (blasting is very harsh!)
Fast free delivery with prime can be found here.
amzn.to/48oYDSX
If you want to see more content press the subscribe and ding the bell that way you will be notified of my next uploads see what else I clean up with a industrial mobile SandBlasting Rig its free and easy to do also it helps my channel out not quite sure how but youtube keeps promoting me to add this info 👍 if you think a friend or family member would enjoy this content please feel free to share it across your social media's or groups forums it may be relevant to because alot of people still have a bad opinion of blasting as an industry from a few bad operators my videos are to prove blasting is a viable reliable option for serface preparation.
As always thanks for watching much appreciated!
Hard doing for easy viewing 😀
If you are a blaster and require help please drop me a message on here. Please DO NOT email or call asking for advice on how to set up or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos 😀
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting

Опубликовано:

 

14 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 46   
@Barnsley_brev
@Barnsley_brev Год назад
Mickyboy does it again . Nice job lad
@Mobileblaster
@Mobileblaster Год назад
Thanks mate appreciate it 😊👌
@james1c763
@james1c763 Год назад
Very satisfying as always.
@Mobileblaster
@Mobileblaster Год назад
😊👌👍
@philglover2973
@philglover2973 Год назад
Awesome video thanks Mick excellent work
@Mobileblaster
@Mobileblaster Год назад
Thanks mate appreciate it 😊👌👍
@phillipherbst6357
@phillipherbst6357 Год назад
Very satisfying as always. It amazes me how fast the surface rust appears when there is water around. I saw the same with some of the trucks that you blasted.
@Mobileblaster
@Mobileblaster Год назад
Yeah its known as Tea staining it's only very light serface rust and a decent rust inhibitor would kill that off near instantly. Humidity can course it but pure clean water doesn't the kind window washing firms use not to get streaks with the water fed pole type of clean water
@scottkenzig5144
@scottkenzig5144 Год назад
G'day Mick. Another boat bites the dust. Good job mate 👍👌🇭🇲🏴󠁧󠁢󠁥󠁮󠁧󠁿
@Mobileblaster
@Mobileblaster Год назад
😆 bites the dust 😏 gudday too ya mate your probably just gearing up for a shift in the hood? Take it easy mate 👌
@scottkenzig5144
@scottkenzig5144 Год назад
@Mobileblaster sure am mate 👍. Not a big fan of Monday mornings 😅 . Cheers mate 👍
@Mobileblaster
@Mobileblaster Год назад
@scottkenzig5144 😆 well my day will be just about starting when your sinking a cold bottle of Calton dry 🍺😆
@scottkenzig5144
@scottkenzig5144 Год назад
@@Mobileblaster haha 😄 too right mate 👍 👌 🍻
@terryjacobson7325
@terryjacobson7325 Год назад
Good job again mate from Australia
@Mobileblaster
@Mobileblaster Год назад
🏴󠁧󠁢󠁥󠁮󠁧󠁿🇦🇺😎🍻
@DEmma1972
@DEmma1972 Год назад
boat looked in pretty good shape
@Mobileblaster
@Mobileblaster Год назад
Only bit of damage I could see was at the front looked to have had a little bump 😬 other than that it was fairly stright 👌👍
@hudson8865
@hudson8865 10 месяцев назад
Thank you
@Mobileblaster
@Mobileblaster 10 месяцев назад
👍
@chriseccles1454
@chriseccles1454 Год назад
🎉🎉🎉 How about that sunken cruiser opposite gates, might have been a flood while tied up😢😊
@Mobileblaster
@Mobileblaster Год назад
I didn't notice it untill i was editing 😬
@Rust.Converter.Primer.Coating
awesome
@Mobileblaster
@Mobileblaster Год назад
Thank you 😊
@davidsedlickas8222
@davidsedlickas8222 Год назад
Seeing this proves beyond any doubt. Pitting created and accelerated because of leaving the mill scale on the steel and bitumen blacking on top.
@Mobileblaster
@Mobileblaster Год назад
Milscale is possibly best primer that can be attached to steel if its keyed up properly in the fist place it would last. One of the hardest things a blaster can remove is milscale.
@stepho9999
@stepho9999 Год назад
A tool tour would be nice compressor type ? hoses etc ...
@Mobileblaster
@Mobileblaster Год назад
Doosan 7 120 425cfm @ 125psi 1 1/4" I'd pipe 1/2" nosel presure blast pot 👌👍
@stepho9999
@stepho9999 Год назад
@@Mobileblaster A bit pricey Doosan 7 120.....🤔
@bnl3731967
@bnl3731967 10 месяцев назад
Great video which marina was you at ?? Or was it dry dock
@Mobileblaster
@Mobileblaster 10 месяцев назад
Thankyou 😊 And Thorn Doncaster 👍
@Ouenn
@Ouenn Год назад
nice
@Mobileblaster
@Mobileblaster Год назад
Thanks 👌 😊
@LiamFinn-s3r
@LiamFinn-s3r Год назад
How much did the full filter set for your compressor cost Mickey And a link for we're u bought them ta lad
@Mobileblaster
@Mobileblaster Год назад
Derv housing and filter? I got it from ripon Farm services just off A1 think it was £85 housing and filter doosan wanted £175+vat 😔
@Алексей-я8э2н
@Алексей-я8э2н Год назад
Мику лайк 👍
@Mobileblaster
@Mobileblaster Год назад
🙂👌👍
@shamsiddinxaytboyev
@shamsiddinxaytboyev Год назад
👍👍👍👍
@Mobileblaster
@Mobileblaster Год назад
👌👍
@Terpimees
@Terpimees Год назад
Is sand blasting a good method to remove paint before repainting metal?
@Mobileblaster
@Mobileblaster Год назад
The best possible process for serface preparation to except a new coating 👌👍
@michaelhomer5155
@michaelhomer5155 Год назад
Do they do anything with the pitted areas before painting?
@Mobileblaster
@Mobileblaster Год назад
Sometimes they blob some weld into the bad areas if the report specs it 👌👍
@airforceone708
@airforceone708 Год назад
what spec are you working too
@Mobileblaster
@Mobileblaster Год назад
Remove loose old finishings and key for paint (as per the paint manufacturer recommendations) I aim for sa 2.5 or better (removing all old finishings and preparing the serface with a mash grade of 20/40 more than perfect for paint) to get to white steel this is pointless in this application as I'm oready proving more than required by the paint manufacturer.
@airforceone708
@airforceone708 Год назад
@@Mobileblaster yep sa 2.5 is a good blast I see your using sand does it contain silica 1% is ok over that it’s banned
@Mobileblaster
@Mobileblaster Год назад
I started with iron silicate (silica free and approved media for blasting) then I swapped out to crashed glass (silica free and approved media for blasting) sillica sand (kiln dry sand) has been banned since the 60s in the UK some States in the US still use this as a media and don't see a problem with it but UK HSE will advise otherwise 👍 its best to stick to approved media's when blasting.
Далее
SandBlasting and painting Narrow boat
38:11
Просмотров 48 тыс.
Sandblasting a narrow boat in a not so dry dock
27:57
Sandblasting dredge hull first person view 4K
19:47
Просмотров 2,9 тыс.
SandBlasting Case 360 digger
12:44
Просмотров 9 тыс.
#101 - How To MAKE MONEY On A CANAL BOAT
22:17
Просмотров 18 тыс.
1972 Toyota Corolla: Undercarriage Sandblast
18:25
Просмотров 457 тыс.